Which mode is the most fuel-efficient for the Fista?

Where is the spare fuse for Haval H6 located?

Haval H6 spare fuse is located on the right side of the engine compartment. Function of fuse: A fuse is an overcurrent protection switch, whose main function is to control circuit operation. There are many circuits in a car, and the fuse serves to protect these circuits. When the circuit temperature is too high or the current is too large, the fuse can blow to protect the circuit. When a fuse blows, certain functions of the car may be affected. Precautions for fuse replacement: When replacing a fuse, use a dedicated clip to remove the fuse. The fuse box in the engine compartment is usually located near the battery, while the fuse box in the cabin is typically located in the main driver's position or the glove compartment on the passenger side.

19

0

Share

What is the reason for the constant lack of water in the Haval H6 auxiliary tank?

Haval H6 auxiliary tank often lacks water due to a damaged oil cooler seal or an unsealed radiator cap. Effects of water shortage in the radiator: If the Haval H6 radiator lacks water, the temperature inside the cylinder will rise rapidly. Continuing to drive the vehicle will cause the car components to operate under overload conditions, reducing the strength of parts such as pistons, piston rings, and connecting rods, and may even cause deformation. At the same time, the gaps between parts will be compromised, which can lead to engine cylinder scoring or bearing failure in mild cases, and complete engine failure in severe cases. Warning signs of radiator water shortage: If the Haval H6 radiator is out of water, the dashboard will display a water shortage indicator, which is a thermometer symbol and is relatively easy to identify.

6

5

Share

What is the Core Philosophy of Geely's Corporate Governance?

Geely's corporate governance philosophy centers on teamwork, continuous learning, innovation and perseverance, seeking truth from facts, and striving for excellence. Product Series: Geely Auto's product portfolio includes the Xingyue L, Xingrui, Xingyue S, Borui, Boyue series, Haoyue, Jiayu, Emgrand series, and Vision series, covering various segments such as sedans, SUVs, and MPVs, with powertrain options including traditional fuel, hybrid, plug-in hybrid, and pure electric systems. Engines and Transmissions: Geely offers six engine series: 1.0L (3-cylinder), 1.0L (4-cylinder), 1.3L, 1.5L, 1.6L, and 1.8L. The company also produces seven transmission series: JLS160, JLS160A, JLS110, JLS90, Z110, Z130, and Z170. All have passed China's 3C certification and meet Euro III emission standards, with the 4G18 and 4G10 engines already compliant with Euro IV standards.

6

4

Share

Why does the ABS light come on after a vehicle inspection?

When the car displays an ABS light, it indicates a malfunction in the vehicle's Anti-lock Braking System. If the wheels lock up during emergency braking, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, which poses a significant safety hazard. There are several states in which the ABS light may illuminate, each with different causes and solutions, as detailed below: State 1: The ABS warning light remains constantly on (most common). Cause 1: The ABS speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed and the wheel's slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections between system wires or poor contact in the ABS relay can lead to signal issues, causing system failure. Solution: Check the wire connections and reconnect any loose parts. State 2: The ABS warning light intermittently comes on and turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases and voltage rises, the ABS light turns off. This can also occur if the ABS system's power supply voltage is too low due to poor wire contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: The ABS warning light stays on after the engine starts and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body, loose wiring connections in the ABS hydraulic valve body, or a faulty ABS computer. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connectors and replace the ABS or ABS/ASR computer if needed. State 4: The ABS warning light comes on during high-speed driving. Cause: At high speeds, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals. This can also occur if the tire or wheel rim specifications are incorrect. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: The ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch or poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, and use a finger to push the brake switch linkage all the way down. Release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary.

15

4

Share

What are the reasons for the BMW X6 remote control not responding?

Here are the specific reasons why the BMW X6 remote control is not responding: Remote control malfunction: The remote control malfunction may be caused by damage to the internal circuit due to mechanical impact or burning of the transmitter components after water exposure. Dead battery: A dead battery can cause the vehicle's sensor to stop working, unable to receive the signal from the remote control, leading to a loss of response. Electromagnetic interference: If the owner is in an environment with electromagnetic interference, it can cause signal transmission disorder, making it impossible to accurately identify the remote control signal. Sensor module failure: When the sensor module fails, the signal sent by the remote control becomes invalid.

8

4

Share

What is the reason for the one-touch up/down failure after replacing the battery in the new Focus?

Here are the specific reasons for the one-touch up/down failure after replacing the battery in the new Focus: Window control lock engaged: The window control lock on the driver's side is engaged. Press and hold the button to lower the window completely, hold for a few seconds, then raise the window to the top and hold for a few seconds to unlock. Window lift motor overheating: After raising and lowering the window several times in a row, the window lift function may be temporarily disabled for a few seconds to prevent damage from overheating of the window lift motor. Please wait for the function to recover before operating again. Control module malfunction: Possible causes include door control module malfunction, window lift control button failure, insufficient battery power, etc. After disconnecting and reconnecting the car battery, the automatic up/down function of the power window may temporarily fail.

16

0

Share

Which mode is the most fuel-efficient for the Fista?

Where is the spare fuse for Haval H6 located?

What is the reason for the constant lack of water in the Haval H6 auxiliary tank?

What is the Core Philosophy of Geely's Corporate Governance?

Why does the ABS light come on after a vehicle inspection?

What are the reasons for the BMW X6 remote control not responding?

What is the reason for the one-touch up/down failure after replacing the battery in the new Focus?

How to Use the S Gear in an Automatic Transmission?

How often should carbon deposits be cleaned in an Audi?

How many days does it usually take to receive a notification after running a red light?

Does the Mercedes-Benz GLS450 have a trailer power socket?