Which Mode is More Fuel-Efficient for the 2021 Sagitar?

What are the differences between Mercedes-Benz S400 and S450?

Below are the differences between Mercedes-Benz S400 and S450: 1. Power: The S450 Canadian version is equipped with a 3.0TV6 twin-turbocharged engine, with a maximum power of 245kW (333PS) @5250rpm and a peak torque of 480Nm @1600-4000rpm. The transmission system is a 7-speed automatic transmission. The S400, on the other hand, is a hybrid version, operating on the Atkinson cycle like the THS. Mercedes-Benz engineers modified the intake valve timing of this V6 engine, allowing it to close later than the original S350, to meet the requirement of a compression stroke shorter than the expansion stroke, thereby achieving higher thermal efficiency using the Atkinson cycle principle. 2. Body Specifications: The S450 has body dimensions of 5116×1899×1483mm (length/width/height) and a wheelbase of 3035mm. In the long-wheelbase version, both the body length and wheelbase have been altered, with the long-wheelbase version measuring 5246mm in length and 3165mm in wheelbase. The S400 has body dimensions of 5230*1871*1485.

8

1

Share

What are the steps to release the P gear for towing a BMW 320?

BMW 320 towing release P gear steps are as follows: 1. To release the gear, remove the plastic mat in the cup holder to reveal the unlock cover under the left cup holder. 2. Insert the red tool into the socket, turn it counterclockwise to remove the cover, and insert the gear lever. 3. Press down the red gear lever and rotate it half a turn to unlock. 4. The red gear lever must remain in the socket to maintain the N gear state. Note: 1. For newer BMW models, the P gear is unlocked underneath the car and can only be released from there. 2. 4S shops only provide the method to release the P gear for vehicles being towed to the shop for repairs. 3. The claim that the P gear can be released via the handle button as long as the battery has some power is incorrect. If the engine is not running, even with battery power, the P gear cannot be released via the handle button. In other words, the P gear can only be released via the button when the engine is started. 4. Generally, tow trucks are only equipped with two towing wheels. If the vehicle is four-wheel drive, be sure to explain the situation when calling for a tow truck and wait until all four wheels are equipped before proceeding.

5

1

Share

Is Sinopec 92 the same as PetroChina 92?

Sinopec 92 and PetroChina 92 are not the same and cannot be mixed together. If you want to switch, you need to drain the remaining gasoline from the fuel tank. Differences between Sinopec 92 and PetroChina 92: Different brands of gasoline have different crude oil sources. Most of Sinopec's crude oil is imported, while PetroChina has many oil fields domestically, mainly concentrated in the northern regions. Therefore, PetroChina's crude oil is largely self-sufficient (domestic crude oil). Additionally, the fuel additives and processing technologies used by different brands vary. Imported crude oil uses superior additives, resulting in better fuel quality compared to domestic crude oil. Sinopec's gasoline is more fuel-efficient than PetroChina's. Fueling Precautions: Do not arbitrarily switch to a different octane rating. If you switch to a lower octane rating, it may cause premature combustion, leading to engine knocking. Incomplete combustion can also increase carbon deposits, clogging ducts and injectors, and result in reduced vehicle power and higher fuel consumption. If you fill up with the wrong fuel, you need to replace the fuel in the tank to avoid affecting engine performance.

1

2

Share

How to Use a Column Shifter?

Operating a column shifter is similar to using traditional wiper and light stalks. Pushing it upward engages R gear (Reverse), pushing it downward from R position shifts to N gear (Neutral), and another downward movement from N position selects D gear (Drive). Regardless of the current gear, directly pressing the button on the right side of the stalk activates P gear (Park). Below is relevant information about column shifters: 1. The term "column shifter" refers to a gear lever located near the driver's chest area, specifically behind the steering wheel where wiper stalks are typically positioned. While manual transmission models with column shifters existed, contemporary vehicles retaining this design are exclusively automatic. Americans' fondness for column shifters remains undiminished. 2. Column shifters originated in the United States during the 1970s-80s economic boom when automatic transmissions became widespread. Some manufacturers relocated gear levers behind the steering wheel to accommodate three front seats or create more cabin space. Americans' driving habits - rarely shifting after initial engagement - made column shifters functionally convenient despite their unconventional position.

2

0

Share

What is the battery model for a Porsche car key?

The battery model is CR2032. It is a lithium manganese dioxide battery, named according to the IEC standard. Among them: C - indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R - indicates that the battery is cylindrical in shape. If it is square, F is used instead; 20 - indicates the battery diameter is 20mm; 32 - represents the battery height is 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is approximately 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is low or quality control is poor, its lifespan will be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. If the usage environment is ideal (sealed, room temperature, free from moisture, etc.), its lifespan can be further extended to 8 years or even 10 years. The usage time of a car remote key battery is closely related to the frequency of use. The more frequently it is used, the shorter the usage time will be. If the remote key battery is dead, the mechanical key can be used directly to open and start the vehicle. Car remote keys use button batteries, mainly in the following models: CR2016, CR2025, CR2032, and CR2450. For the specific model used in each key, owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: Car key remotes have a high usage rate, and this is almost one of the most common remote batteries. The battery voltage is 3V, while most car key batteries are powered by 9V, so all three batteries need to be replaced each time. Examples include Guangben, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter is 20mm, thickness is 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than CR2016. However, some car keys still use it. It is thicker than the 2016 model but has a relatively higher storage capacity. CR2025 specifications: battery diameter is 20mm, thickness is 2.5mm. This type of battery is also commonly used in audio remotes. Button-type CR2032 battery: Its thickness is twice that of CR2016. The 3V-CR2032 lithium manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically stable manganese dioxide, the negative electrode material is lithium metal, and the electrolyte is a lithium battery electrolyte. The main components of the electrolyte are ethylene glycol dimethyl ether, propylene carbonate, and lithium perchlorate. It is shaped like a button, hence the name button lithium battery or lithium manganese button battery. Button-type CR2450 battery: Compared to the other three models, it is thicker and larger, with a diameter of 24.5mm and a height of 5.0mm. The rated current value of CR2450 is 0.2mA, mainly used in low-power electronic products. Generally, the battery can provide an output current of 0.001mA to 5mA, with a continuous output current of up to 15mA and a flash output current of up to 30mA, meeting the requirements of most small electronic products for light emission, sound production, and RF output.

8

1

Share

What is the curb weight of the Geely Free Cruiser in kilograms?

Geely Free Cruiser curb weight (kg) 1367, which is 1.367 tons. Here is the relevant introduction: 1. Configuration: The Free Cruiser is equipped with four-door courtesy lights, remote-controlled windows, electric wide-angle blind-spot-free rearview mirrors, high-mounted brake lights, electronic smart keys, pneumatic spring hood support rods, three-stage door limiters, center armrest boxes, delayed lighting systems, leather steering wheels, and other advanced humanized equipment and safety protection devices not found in vehicles of the same class. It integrates safety, comfort, and technology, allowing drivers and passengers to fully experience Geely's meticulous care and comprehensive services in a comfortable and safe riding environment. 2. Power: During the test drive, various road surfaces were selected, and the Free Cruiser's power performance was excellent, with ample reserve power even at high speeds, and smooth and powerful hill starts. The Free Cruiser can reach a top speed of over 170 kilometers per hour. Due to the optimized matching of the engine and chassis, tests have proven that the Free Cruiser's fuel consumption does not exceed 5.6 liters per 100 kilometers when driving at a constant speed of 90 kilometers under specified conditions.

9

3

Share

Which Mode is More Fuel-Efficient for the 2021 Sagitar?

What are the differences between Mercedes-Benz S400 and S450?

What are the steps to release the P gear for towing a BMW 320?

Is Sinopec 92 the same as PetroChina 92?

How to Use a Column Shifter?

What is the battery model for a Porsche car key?

What is the curb weight of the Geely Free Cruiser in kilograms?

Why Do People Fail the Oncoming Vehicle Section in Driving Test Part 3?

How to Maintain a Car That Has Been Unused for a Long Time?

Are Position Lights and Hazard Warning Lights the Same Light?

Will honking in a no-honking zone result in penalty points?