Which mode is fuel-efficient for Haval H6?

1 Answers
LeTalia
07/29/25 11:51pm
Use the Eco mode for fuel efficiency. The Eco mode, also known as ECO mode, is formed through ecological energy-saving optimization, primarily aimed at reducing fuel consumption in motor vehicles. This mode can be used for extended periods and can be switched at any time via a toggle button. When the vehicle is driving at high speeds, the mode will automatically turn off. Here are some related details: 1. Switching driving modes does not require turning off the vehicle: There is no need to turn off the vehicle when switching driving modes. The mode can be switched under any circumstances, whether the vehicle is moving or stationary. It is very convenient to use and allows the selection of driving modes based on different road conditions. The switching process is very user-friendly and adds a certain level of enjoyment to driving. 2. How to save fuel while driving: Activate the Eco mode, avoid sudden braking and rapid acceleration while driving, reduce the weight in the trunk by carrying only essential items, and avoid placing unnecessary items in the trunk. Always use the specified fuel grade for the vehicle and minimize the use of air conditioning to effectively save fuel.
Was this review help?
14
3
Share
More Forum Discussions

How to adjust the time on Lavida's dashboard?

There are the following methods to adjust the time on Lavida's dashboard: 1. Turn on the ignition switch. 2. Press and hold the protruding button in the middle of the dashboard for 3 seconds. 3. When the hour starts blinking, press the corresponding button to adjust the hour to the actual time. 4. After setting the hour, wait for 2 seconds until the minute starts blinking, then adjust the minute to the actual value. 5. Once both hour and minute are set, it only takes 5 seconds to complete. Notes: 1. The time displayed on the car dashboard is only an auxiliary function and does not have high accuracy. 2. The adjusted time may gradually become faster or slower. As long as you master the adjustment method, you can readjust it whenever there is a deviation.
19
4
Share

How to Unlock a Locked Steering Wheel on a Toyota Corolla?

Toyota Corolla steering wheel lock solution is to press the brake pedal, hold the steering wheel with your left hand and gently shake it, while simultaneously turning the key with your right hand to unlock it. If you are not skilled, it may not succeed on the first try. In that case, remove the key and repeat the steps a few times. Here are some methods to avoid locking the steering wheel: 1. Steering wheel lock often occurs with new car owners because after parking and turning off the engine, they find the steering wheel is not straightened and habitually try to straighten it by hand, which immediately activates the anti-theft function. 2. After turning off the engine, try not to touch the steering wheel. If you need to straighten it, start the engine to do so.
16
3
Share

What does it mean when the EPC light comes on in a new car?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other circumstances. The power-on self-test is a pre-driving check that monitors all vehicle sensors. Typically, if the engine isn't started after power-on, the light will turn off by itself after about 3 seconds. If the EPC light stays on after starting the vehicle or illuminates under other conditions, common causes include faults in the engine intake system, throttle valve, fuel system, engine, ECU control unit, or brake lights. Below are detailed explanations of other reasons that can trigger the EPC light: Engine intake system fault: The EPC light will alert when the engine intake is obstructed or insufficient. Throttle valve fault: Carbon buildup is a common issue with throttle valves. Additionally, dirt accumulation can affect intake and trigger the indicator light. Fuel system fault: Issues such as substandard fuel, fuel deterioration, or poor fuel atomization. Engine fault: Insufficient engine pressure or problems with components like the intake valve in the powertrain can also activate the EPC light. ECU control unit fault: For example, interference with the onboard computer signals or false alarms from the onboard computer. Brake light fault: Situations like non-functional brake lights, faulty brake switches, or brake circuit issues. Solutions for when the EPC light comes on: Troubleshoot intake system issues, use fuel with the appropriate octane rating, clean the throttle valve, etc. Remove carbon deposits from relevant components. Re-flash ECU-related data. If the EPC light comes on, the owner can first try turning off the engine and restarting it to see if the EPC light remains illuminated. If it doesn't come back on, there may be no issue, possibly just a temporary EPC indicator glitch. If the EPC light stays on or frequently illuminates, drive to the nearest service point for professional diagnosis and timely resolution of potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data in the system is abnormal, the EPC system will take predefined actions on the powertrain. Common EPC indicator lights usually display in two colors: yellow and red. A yellow EPC fault light means the car can still be driven, but you should proceed slowly to a repair point. A red EPC fault light indicates a more serious situation, requiring immediate pulling over and contacting relevant repair personnel. Continued driving could directly affect the vehicle's core components or driving safety.
5
3
Share

How to Adjust the Audio Equalizer of Geely Vision Car?

To adjust the audio equalizer of the Geely Vision car, first locate the settings menu, then find the audio settings where you can adjust the equalizer. There is no universal standard for equalizer settings, so you can customize it according to your personal preferences. Below is some related information about the Geely Vision: 1. Geely Automobile Group is a subsidiary of Zhejiang Geely Holding Group, headquartered in Hangzhou, Zhejiang, China. Its brand logo is inspired by the expanding universe, incorporating silver starlight, deep space gray, and earth blue, symbolizing Geely's transition from the blue sky and earth of its 3.0 brand era to the pursuit of the vast cosmos. 2. The Geely Vision has dimensions of 4590mm in length, 1734mm in width, and 1470mm in height. The car is equipped with features such as frameless wipers, quick-cooling electric air conditioning, auto-folding exterior mirrors, one-touch electric sunroof with anti-pinch function, sporty multi-function leather steering wheel, anti-glare interior mirror, one-touch power windows for all four doors with anti-pinch function, among others.
18
0
Share

What is the fuel tank capacity of the Ford Escort?

The fuel tank capacity of the Escort is 50 liters, which is the officially announced data. Owners who have purchased the Escort can also check this information on the vehicle's configuration sheet. The Escort uses 92-octane fuel, with a fuel consumption of 5.7 to 5.8L per 100 kilometers. A full tank can cover a distance of 862 to 877 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is the volume from the bottom of the tank to the safe limit. There is still some space from the safe limit to the tank opening, which is reserved to ensure that the fuel inside the tank can expand when the temperature rises without overflowing. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
12
3
Share

How to Adjust the Rearview Mirror of a Jetta Car?

The method for adjusting the rearview mirror of a Jetta car is as follows: 1. To adjust the left rearview mirror, rotate the button to the L position, and move the button up, down, left, or right to adjust the angle. 2. To adjust the right rearview mirror, rotate the button to the R position, and move the button up, down, left, or right to adjust the angle. 3. Once adjusted to the desired position, rotate the button to the middle position. More information about the Jetta car is as follows: 1. The new Jetta has significant changes in its exterior design. The front grille adopts a mesh pattern, and the headlight assembly features a new design both in outline and internal structure, with chrome trim decorations inside. The front bumper also adopts a new style, making the entire front look more refined. 2. The interior features a four-spoke multifunction steering wheel. For the infotainment screen, higher trim levels are equipped with a large LCD screen, while the lower trim levels still offer a decent interior feel. The only downside is the use of hard materials for the dashboard trim.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.