Which Mercedes-Benz model uses the Maybach emblem?

How to Properly Adjust Rearview Mirrors?

Correct methods for adjusting rearview mirrors are: 1. Adjust the center rearview mirror so that the left edge of the mirror just cuts off the right ear of the driver's reflection in the mirror; 2. Adjust the left rearview mirror to position the distant horizon at the center, with the left and right positions adjusted so that the car body occupies one-quarter of the mirror's surface; 3. When adjusting the up and down position of the right rearview mirror, it should occupy two-thirds of the mirror's surface. Rearview mirrors are located on the left and right sides of the car's front and at the front of the car's interior. They are important safety components, whose function is to allow the driver to indirectly see the conditions behind, beside, and below the car, thereby expanding the driver's field of vision.

6

1

Share

What does the exclamation mark on the Emgrand GS dashboard mean?

When an exclamation mark appears on the car dashboard, there are 5 possible situations: general fault, automatic transmission fault, brake system fault, abnormal tire pressure, and lighting fault. The following is a detailed analysis of these 5 situations: General fault: An exclamation mark inside a triangle indicates a malfunction in the car's general performance or components and functions. Possible causes include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic transmission fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. The transmission oil should be replaced promptly. Brake system fault: An exclamation mark inside a circle with parentheses represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Abnormal tire pressure: An exclamation mark with a horizontal line below parentheses is the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating a malfunction in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the problem.

5

1

Share

What to Do When ETC Runs Out of Battery?

ETC device charging methods: For solar-powered ETC devices, you can park the vehicle under the sun for a few hours to charge the device. For ETC devices without solar panels, you can plug in a dedicated power cable and charge via the cigarette lighter socket. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; a red light will briefly turn on, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by allowing vehicles to pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and stops, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

5

Share

Can the Clutch and Brake Be Pressed Simultaneously?

Clutch and brake can be pressed simultaneously, but the frequency should be minimized to avoid clutch damage. Functions of the clutch: 1. Gradually increase the driving force of the car for smooth starting; 2. Temporarily separate the engine and transmission for gear shifting; 3. Prevent overload of the transmission system; 4. Reduce torsional vibration impact from the engine and extend the service life of transmission gears. The function of the brake is to reduce speed or stop the vehicle. Its working principle is to convert the kinetic energy of the moving vehicle into heat energy through friction between the brake pads and brake drum, as well as between the tires and the ground, thereby slowing down or stopping the vehicle.

19

1

Share

What to Do When a Car Tire Bursts on the Highway?

Highway tire burst handling methods are: 1. Control the direction and slow down the speed; 2. Gradually pull the vehicle to the right and stop; 3. Quickly place a triangle stand 100 meters behind the car; 4. Replace the spare tire and quickly leave the highway. The reasons for tire bursts are: 1. Tire leakage; 2. Excessive tire pressure; 3. Insufficient tire pressure; 4. Severe tire wear. Tire maintenance methods include: 1. Regularly remove debris from tire treads; 2. Periodically check tire pressure; 3. Inspect tire wear and replace them in time; 4. Repair tires promptly; 5. Immediately stop and check tire conditions if abnormalities are detected while driving.

7

4

Share

What is the method to reset the maintenance light on a Mercedes-Benz E300?

Method to reset the maintenance light on a Mercedes-Benz E300: 1. Power on the car and press the toggle button on the steering wheel to switch the dashboard to the trip panel. 2. Press the return button on the steering wheel, then press the confirm button before the navigation bar appears to reset the maintenance light. The Mercedes-Benz E is a mid-to-large luxury sedan under the Mercedes-Benz brand, with dimensions of 4947 mm in length, 1860 mm in width, and 1470 mm in height, and a wheelbase of 2939 mm. The dark gray interior gives a youthful feel, paired with brown seats for a high-end touch. The focal point on the dashboard is the large GPS navigation screen, with the audio control buttons in the middle section and the air conditioning control buttons at the bottom.

2

5

Share

Which Mercedes-Benz model uses the Maybach emblem?

How to Properly Adjust Rearview Mirrors?

What does the exclamation mark on the Emgrand GS dashboard mean?

What to Do When ETC Runs Out of Battery?

Can the Clutch and Brake Be Pressed Simultaneously?

What to Do When a Car Tire Bursts on the Highway?

What is the method to reset the maintenance light on a Mercedes-Benz E300?

Does the Mercedes-Benz E-Class have a wagon version?

What are the reasons for the anti-skid light to illuminate?

How to adjust the time on a Honda City?

How to Disable the Lock Sound on Buick Excelle?