Which manufacturer produces the WM EX5?

Do You Need to Release the Throttle When Shifting Gears in a Manual Transmission?

When shifting gears in a manual transmission, you need to release the throttle. Only CVT transmissions can truly achieve shifting without releasing the throttle. Shift gears according to the car's speed: Generally, start in first gear, then shift to second gear after driving a few meters; shift to third gear when the speed reaches above 20 mph but below 35 mph; shift to fourth gear when the speed reaches above 35 mph but below 45 mph; shift to fifth gear when the speed exceeds 45 mph. Coordination between clutch and throttle during shifting: When shifting gears, the clutch and throttle must be well-coordinated. Press the clutch pedal all the way down while simultaneously releasing the throttle pedal, then quickly shift to the corresponding gear.

3

1

Share

Under what circumstances can you make a U-turn at a red light?

Here are the situations where you can make a U-turn at a red light: 1. Places with an early U-turn opening: If there is a special left turn or U-turn indication when approaching the intersection, the driver can turn on the left turn signal. This will not affect other vehicles or result in a violation. 2. Intersections with a U-turn sign: Generally, the presence of a U-turn sign means that you can make a U-turn. Therefore, when driving, it is best to make a U-turn based on your own situation without disturbing other vehicles and ensuring the safety of pedestrians. 3. Intersections without explicit prohibitions on U-turns and left turns: Generally, if there is no sign prohibiting a U-turn at the intersection, you can make a normal U-turn without affecting other vehicles. If there is a central divider in the middle of the road, it may change from a solid line to a dashed line when approaching the intersection.

13

0

Share

What is the valve clearance for Komatsu engines?

Komatsu engine valve clearance is measured with the engine at operating temperature, with the intake valve at 0.4 mm and the exhaust valve at 0.6 mm. Below is an introduction to valve clearance: Hazards of insufficient valve clearance: When the engine is running, the valves will expand due to rising temperatures. If there is no gap or insufficient clearance between the valve and its transmission components when cold, thermal expansion during operation will inevitably cause the valve to fail to close tightly. This results in gas leakage during the compression and power strokes, reducing engine power and potentially making the engine difficult to start in severe cases. Introduction to valve clearance: To eliminate this phenomenon, a certain gap is typically maintained in the valve and its transmission mechanism during cold assembly of the engine, compensating for thermal expansion of the valve. This gap is called valve clearance.

6

5

Share

The Differences Between Geely Emgrand GS and Emgrand S

Geely Emgrand GS and Emgrand S differ in the following aspects: Price: The top variant of Emgrand S is officially priced lower than that of Emgrand GS. Overall Body: The top variant of Emgrand S has a shorter body length compared to Emgrand GS, but both share the same wheelbase. Power Output: The top variant of Emgrand GS delivers stronger performance than Emgrand S. Product Positioning: Although Emgrand S shares many similarities with Emgrand GS in terms of vehicle type, Emgrand S focuses more on brand upgrades in youthful sportiness, fashion sense, and technological appeal.

1

0

Share

What Are the Reasons for Car Air Conditioning Freezing on Highways?

Here are five reasons why car air conditioning may freeze: 1. Adjustment issue: The expansion valve is set too low, resulting in excessively low low-pressure. 2. Lack of refrigerant: Insufficient refrigerant in the system causes low evaporation pressure. 3. Internal circulation: The internal circulation filter is clogged. 4. Temperature control failure: The temperature control (or temperature sensor) malfunctions, preventing the compressor from shutting off. 5. Control valve failure: The energy control valve (pressure regulating valve) of the variable displacement compressor fails, causing the compressor to operate at full capacity continuously, leading to excessively low low-pressure and frost formation on the evaporator. Of course, the level of low-pressure is also influenced by ambient temperature and cabin temperature.

9

2

Share

Reasons for a Clicking Sound When Braking in a Car

Car brakes making a clicking sound are mostly due to issues with the car's braking system. Below are detailed explanations and solutions for the reasons behind a clicking sound when braking: 1. Excessive wear on brake discs and brake pads: Both brake discs and brake pads are high-wear items. Every time the brakes are applied, these two components rub against each other, leading to natural wear over time. When the wear becomes excessive, unusual noises will naturally occur. Solution: Regularly inspect and replace brake discs and brake pads. 2. Improper installation of brake pads: If the brake pads are installed backward or if the model does not match, unusual noises may also occur. Solution: Visit a professional auto repair shop to have the brake pads reinstalled correctly.

20

1

Share

Which manufacturer produces the WM EX5?

Do You Need to Release the Throttle When Shifting Gears in a Manual Transmission?

Under what circumstances can you make a U-turn at a red light?

What is the valve clearance for Komatsu engines?

The Differences Between Geely Emgrand GS and Emgrand S

What Are the Reasons for Car Air Conditioning Freezing on Highways?

Reasons for a Clicking Sound When Braking in a Car

Reasons for Excessive Vibration When the Car Air Conditioner is On?

What is the recommended tire pressure for motorcycle tubeless tires?

Why is the car air conditioner not blowing strong air?

Can a car engine withstand running continuously for 12 hours?