Which manufacturer produces the Mustang Bojun?

1 Answers
VanKennedy
07/30/25 5:56am
Mustang is an independent brand, and its manufacturer is itself. Here is some information about Mustang cars: 1. The Mustang Bojun is equipped with two types of engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine. 2. 1.5-liter naturally aspirated engine: It delivers 112 horsepower and a maximum torque of 150 Nm. The engine reaches its maximum torque at 4000 rpm and its maximum power at 6000 rpm. 3. 1.5-liter turbocharged engine: It produces 150 horsepower and a maximum torque of 215 Nm. This engine achieves its maximum torque between 2000 and 4500 rpm and its maximum power at 5500 rpm.
Was this review help?
14
5
Share
More Forum Discussions

Is it normal for the parking radar light to stay on in the car?

It is normal for the parking radar light to stay on in the car. The 'P△' symbol represents the parking radar system, and when illuminated, it indicates that the parking radar is activated. The technical name for parking radar is reverse collision avoidance radar, which works by emitting ultrasonic waves from radar probes to calculate the distance to obstacles. Based on the distance, it alerts the driver with different frequency alarms to help better control parking orientation. Function of parking radar: Parking radar is a safety assistance device for parking or reversing. It informs the driver about surrounding obstacles through sound or more intuitive displays, eliminating the hassle of checking front, back, left, and right when parking, reversing, or starting the vehicle. It also helps drivers overcome blind spots and unclear vision. Parking radar mainly consists of ultrasonic sensors, a controller, and a display or buzzer. Ultrasonic sensors: Their main function is to emit and receive ultrasonic signals, then input these signals into the main unit for display on the device. Controller: Processes the signals to calculate the distance and direction between the vehicle body and obstacles. Display or buzzer: When the sensors detect that the vehicle is at a dangerous distance from an obstacle, the system alerts the driver through the display and buzzer.
7
1
Share

Where to Check the Vehicle Manufacturing Date?

You can check the vehicle manufacturing date on the vehicle's nameplate, which is mostly located on the firewall, the radiator support, or near the front windshield. All information on the manufacturing nameplate is printed at once and cannot be altered unless the entire nameplate is replaced. The vehicle nameplate is a plate that indicates the basic characteristics of the vehicle, including the brand, model, engine power, total weight, load capacity or passenger capacity, manufacturing number, manufacturing date, and manufacturer name. Additionally, a vehicle has an identity number, known as the VIN (Vehicle Identification Number), commonly referred to as the chassis number. This 17-digit number typically contains various information about the vehicle, such as the manufacturing plant, country of origin, vehicle type, and specific features.
2
3
Share

What is the Difference Between Cold Air and Air Conditioning in a Car?

The difference between cold air and air conditioning in a car lies in their effects, principles, and fuel consumption: Heating: Blows out hot air. Cold air: Blows out cold air. Principles differ: Cold air: Cold air is formed by compressing refrigerant into a liquid, which then evaporates and absorbs a large amount of heat from the air. Heating: Heating comes from the heat generated by the engine during operation. When the engine's cooling system dissipates heat from the engine, a fan directs this heat into the car's interior, creating warm air. When heating is not in use, the fan stops, and the heating vents close, allowing the dissipated heat to escape into the atmosphere. Fuel consumption varies: Cold air: When the cold air is turned on, the compressor pulley drives the compressor, increasing the engine load and consuming a certain amount of fuel. Heating: When heating is not in use, the fan stops, and the heating vents close, allowing the dissipated heat to escape into the atmosphere. Therefore, car heating reuses waste heat and does not consume additional fuel.
10
2
Share

Is Car Interior Color Change Done by Spray Painting?

Car interior color change should not be done by spray painting; it should be achieved through decoration. Here is an introduction to car interior: 1. Car Interior: Mainly refers to automotive products used for internal modifications, covering all aspects of the car's interior, such as steering wheel covers, car seat cushions, car floor mats, car perfumes, car pendants, interior decorations, storage boxes, etc. 2. Car Interior System: Includes the instrument panel system, auxiliary instrument panel system, door trim panel system, headliner system, seat system, pillar trim panel system, other cabin interior trim systems, cabin air circulation system, trunk interior trim system, engine compartment interior trim system, carpets, seat belts, airbags, and more.
20
1
Share

Which button is for defogging in the Volkswagen Lavida?

The defogging button in the Volkswagen Lavida is located on the air conditioning panel, featuring a rectangular shape with a steam symbol. The usage methods for defogging are as follows: 1. In winter, use hot air for defogging. Hot air defogging utilizes the warm air from the air conditioner to clear the fog on the windows. However, hot air defogging does not work immediately. When you first use hot air to blow on the windows, the fog may initially increase because the hot air amplifies the temperature difference between the inside and outside of the car. After a while, the moisture on the windows will be dried, and the fog will disappear. 2. The front windshield defogging button has a fan-shaped icon with several curved upward arrows in the middle. The front defogging uses blowing air to remove fog. The rear defogging button is square with a curved arrow icon. The rear defogging uses electric heating wires to remove fog while simultaneously heating both rearview mirrors.
20
2
Share

How to reset the Vitara oil light?

Vitara oil light reset method is as follows: 1. Turn on the ignition switch, briefly press the indicator selection button on the right side of the instrument panel to change the information display screen content to range display; 2. During the range display process, continuously press the indicator selection button for more than 5 seconds, and the lower area of the information display screen will show "OIL" for 2 seconds; 3. Release the indicator selection button and quickly press the button 5 times consecutively within 2 seconds. This operation must be completed within 3 seconds; 4. After flashing 3 times, the light will go out. The oil light is used to display the oil pressure status in the engine. When the key is turned to the ON position and the vehicle begins self-inspection, the indicator light will illuminate and will turn off after startup.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.