Which manufacturer produces Hanteng vehicles?

Will points be deducted for not using turn signals?

Failure to use turn signals or incorrect use of turn signals will result in a deduction of 10 points each time. The specific regulations are as follows: Not using or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. Turning within less than 3 seconds after activating the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. There are 6 instances in Subject 2 where turn signals are required: 1. Turn on the left turn signal when starting the vehicle. 2. Turn on the left turn signal when starting on a slope. 3. Turn on the right turn signal when pulling over for parallel parking, stopping the vehicle 30 cm from the curb before reversing. 4. Turn on the left turn signal before shifting into reverse gear for parallel parking, as the steering wheel will be turned fully to the right during reversing, causing the front of the car to move left. 5. Shift into drive gear and turn on the left turn signal before exiting the parking space in parallel parking, turning it off promptly after exiting. 6. Turn on the left turn signal when entering the area for a right-angle turn, turning it off promptly after completing the turn. Subject 2 has a maximum score of 100 points, with evaluation criteria for failing, deducting 20 points, deducting 10 points, or deducting 5 points. The test is passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required. ② For other vehicle types, a score of 80 or above is required. The C1 and C2 license tests include five mandatory items: reversing into a parking space, parallel parking, slope parking and starting (canceled for C2), right-angle turns, and curve driving (commonly known as S-curves). Some regions also include a sixth item: high-speed toll card collection. The A1, A2, A3, B1, and B2 license tests include: pole test, slope parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, narrow gate crossing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp mountain curves, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

11

0

Share

How to Determine if the Fuel Rail is Faulty?

When the air pressure is insufficient, it may cause poor acceleration or engine hesitation. When the air pressure is unstable, the engine will respond sluggishly with jerky movements. Excessive air pressure can lead to engine vibration, incomplete combustion resulting in reduced fuel economy, and environmental pollution.

17

3

Share

How to Operate the Reverse Gear in a Pickup Truck?

First, start the vehicle and ensure it is in the reverse state. The driver should press the clutch of the manual transmission vehicle with the left foot and simultaneously press the brake with the right foot. With the right hand, press the gear lever downward from the top; ladies may need to apply more force, while men only need to exert slight pressure to push the gear lever all the way down without releasing it, then pull it all the way to the left.

4

0

Share

How to Align with the Pole in Ramp Parking?

When going uphill, observe whether the left rearview mirror frame covers the first ground reference line. If it does, it indicates that the front of the car has reached the parking line ahead. Align using the dot on the windshield wiper. When the dot on the wiper aligns with the pole next to the parking line, you can stop the car. In some test centers, several road stakes are placed on the left side during uphill parking. When your shoulder is level with the first road stake in front of the parking line, you can stop the car.

7

3

Share

How to Apply Paint Protection Film?

First, use DAP data in the data center to load the film, which is vehicle-specific with zero tolerance for errors. Before applying the transparent protective film, thoroughly wash the vehicle to ensure it is free from dirt. After cleaning the paint surface, cover it with the pre-cut film for seamless adhesion. Use a squeegee to remove excess moisture. Once the water is scraped off, dry the car body to prepare for the next step of applying HEXIS encapsulation fluid. Apply HEXIS encapsulation fluid, and the vehicle's paint protection film installation is complete.

8

5

Share

What are the advantages and disadvantages of naturally aspirated and turbocharged engines?

Naturally aspirated engines have the following pros and cons: 1. Advantages: (1) Mature technology with higher stability. (2) Smooth power delivery and fast response. (3) Lower maintenance costs compared to turbocharged engines. 2. Disadvantages: Power output is inferior to turbocharged engines. Turbocharged engines have the following pros and cons: 1. Advantages: (1) Improved fuel economy and reduced exhaust emissions. (2) High power output from small displacement with sustained power delivery. 2. Disadvantages: (1) Lag in power response and less smooth operation. (2) Higher maintenance costs.

2

1

Share

Which manufacturer produces Hanteng vehicles?

Will points be deducted for not using turn signals?

How to Determine if the Fuel Rail is Faulty?

How to Operate the Reverse Gear in a Pickup Truck?

How to Align with the Pole in Ramp Parking?

How to Apply Paint Protection Film?

What are the advantages and disadvantages of naturally aspirated and turbocharged engines?

Which Cars Use 98 Octane Gasoline?

What is an ETC in-vehicle device?

What does the red exclamation mark light indicate?

What are the causes of unstable idle speed in gasoline engines?