Which manufacturer does Lynk & Co belong to?

1 Answers
NoraFitz
07/29/25 6:33pm
Lynk & Co is a Chinese brand under Geely. Lynk & Co offers both sedans and SUVs in its lineup, including models such as 01, 02, 03, 05, and 06. The Lynk & Co 03 is a compact sedan with a wheelbase of 2730 mm, and dimensions of 4639 mm in length, 1840 mm in width, and 1472 mm in height. The 03 is equipped with three engine options: a low-power 1.5-liter turbocharged engine, a high-power 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. Details: Low-power 1.5-liter turbocharged engine: Delivers 156 horsepower and 245 Nm of maximum torque. This engine reaches its peak power at 5000 rpm and its peak torque between 1450 and 4000 rpm. It features direct fuel injection and an aluminum cylinder head and block. High-power 1.5-liter turbocharged engine: Produces 180 horsepower and 265 Nm of maximum torque. This engine achieves its peak power at 5500 rpm and its peak torque between 1500 and 4000 rpm. It also includes direct fuel injection and an aluminum cylinder head and block. 2.0-liter turbocharged engine: Generates 190 horsepower and 300 Nm of maximum torque. This engine reaches its peak torque between 1400 and 4000 rpm and its peak power at 4700 rpm.
Was this review help?
5
2
Share
More Forum Discussions

How to Handle Illegal Reverse Driving?

According to legal regulations, vehicles driving in the wrong direction will be penalized with 3 demerit points. If the offense occurs on a highway, the penalty increases to 12 demerit points, and the driver must report to the traffic police department for processing. Reverse driving refers to the act of not adhering to legal requirements by driving on the wrong side of the road. Both the Road Traffic Safety Law and the Regulations on the Application and Use of Motor Vehicle Driving Licenses stipulate penalties for such violations. Here is more relevant information: 1. According to Ministry of Public Security Order No. 123, the demerit point standards for reverse driving are as follows: Motor vehicle drivers committing any of the following violations will receive 12 demerit points: driving a motor vehicle in reverse, going the wrong way, or making a U-turn across the central divider on a highway. Motor vehicle drivers committing any of the following violations will receive 3 demerit points: driving a motor vehicle without following overtaking or yielding rules, or driving in the wrong direction. 2. Criteria for determining liability in traffic accidents: whether the party involved has committed a traffic violation; whether there is a causal relationship between the violation and the accident; and the extent of the violation's role in causing the accident.
2
2
Share

What to Do When the ETC Card is Pulled Out?

After the ETC card is pulled out, it should be reinserted gently into the ETC sensor's card slot with the side containing the chip facing forward. Once the sensor detects the ETC express card, the sensor's display will light up and show the message "Start Billing," indicating that the connection between the sensor and the express card is intact. The installation position for ETC is as follows: The height should be no lower than 1.2 meters and no higher than 2.5 meters. The installation angle N should be between 30 and 90 degrees (the angle between the surface of the electronic tag and the horizontal plane). For small vehicles such as cars and minivans, the OBU device should be installed in the upper-middle part of the front windshield. For large vehicles like trucks and buses, the installation position should be in the middle-lower part. If the vehicle has anti-explosion film or if it is applied later, since the film contains metal ions that may interfere with the signal transmission of the microwave communication link, the ETC should be installed in the "microwave window" area or a rectangular area of 8cm x 10cm should be cut out in the anti-explosion film.
11
3
Share

The Fastest Tips for Beginners to Learn Reversing a Car

Tips for beginners to reverse a car are introduced as follows: 1. Ensure safety: For beginners, the first step is to confirm whether the rear of the car is safe. If you are not sure about the safety while in the car, you can get off and check. Prepare to reverse only after confirming safety. If there is someone nearby, it's best to ask for help. 2. Correct posture: A good driving posture is crucial for safe driving, and the posture must be correct when reversing. When looking at the rear window, hold the upper part of the steering wheel with your left hand and turn your body to get a wide rearview angle. If you are reversing while looking sideways, hold the steering wheel with your right hand and slightly extend your head. 3. Slow speed: The speed when reversing must be well controlled, and the accelerator pedal must not be pressed. For beginners, the left foot can control the clutch to maintain a semi-clutch state, while the right foot is placed on the brake pedal, ready to brake at any time. 4. Determine distance: An important point for reversing is to confirm the distance, which should be judged through the left and right rearview mirrors and the rearview mirror respectively. If necessary, turn your head to observe the distance of obstacles.
4
1
Share

How to Reapply for a Lost ETC Card?

ETC card reapplication method: The vehicle owner should bring their ID card, the original and a copy of the vehicle registration certificate to the bank counter to handle the card replacement or reissuance. The installation process for the ETC device is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; a red light will briefly illuminate, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield, ensuring the surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device. ETC device activation method: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting and removing the card twice without attaching the electronic tag, it is a normal phenomenon and does not affect activation. Alternatively, press the button on the top of the electronic tag to enable Bluetooth directly. Turn on the phone's Bluetooth and open the corresponding mobile app (usually a download QR code is provided on the electronic tag), then navigate to the device activation interface. Click on "Device Connection" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle's front to complete the activation.
3
0
Share

Does purchasing a used car count towards GDP?

Purchasing a used car does not count towards the GDP of the current year. Here is more relevant information: 1. GDP: GDP refers to the total market value of all final goods and services produced within a country during a certain period. It is important to note that GDP measures production within a certain period, not the value of newly sold goods. Used cars are generally not considered newly produced, meaning the value of a second-hand car was already included in GDP when the new car was originally sold. Therefore, purchasing a used car does not count towards the GDP of the current year. 2. Actual accounting: In actual accounting, the three manifestations of GDP are reflected through three calculation methods, namely the production approach, the income approach, and the expenditure approach. These three methods reflect GDP and its composition from different perspectives. The results calculated using the production approach, income approach, and expenditure approach are called production-based GDP, income-based GDP or distribution-based GDP, and expenditure-based GDP, respectively.
5
4
Share

Can a new car without temporary license plates but with insurance be driven on the road?

A new car must have license plates to be driven on the road; without temporary license plates, it cannot be driven. The following are the details about new cars without temporary license plates: 1. Before obtaining the official license plates: New cars can be driven on the road with temporary license plates. The "Road Traffic Safety Law of the People's Republic of China" clearly stipulates that vehicles must display license plates as required when driven on the road, and failure to do so will result in penalties. 2. Temporary license plates must be applied for according to regulations: Before obtaining the official license plates, temporary license plates must be applied for as required to drive on the road. Temporary license plates must be used within their validity period, and using them beyond the validity period will result in penalties. New cars cannot use temporary license plates for more than 15 days, and the owner should promptly apply for official license plates from the vehicle management authority. After expiration, the vehicle may face impoundment, a fine of 200 yuan, and a deduction of 3 points from the driver's license.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.