Which Magotan model comes with a manual transmission?

1 Answers
McEverly
07/29/25 7:37pm
Magotan 2007, 2009, and 2011 models all offer manual transmission variants. A manual transmission is a gear-shifting mechanism that alters the engine's rotational speed and torque delivered to the drive wheels. It enables vehicles to achieve varying traction and speed under diverse conditions such as stationary starts, hill climbing, cornering, and acceleration, while keeping the engine operating within optimal performance ranges. The domestically produced all-new Magotan largely inherits the design language of the European next-generation Passat. It features a refreshed family-style front grille paired with sharper headlight designs on both sides. The rear incorporates LED taillights and adopts a dual-exhaust outlet layout with flat tips. Dimensions for the domestic all-new Magotan measure 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2871mm. It is powered by three engine options: a 1.4L turbocharged engine, a low-power 2.0L turbocharged engine, and a high-power 2.0L turbocharged engine.
Was this review help?
15
5
Share
More Forum Discussions

Does the Toyota Camry use 92 or 95 octane gasoline?

The Toyota Camry uses 92 octane gasoline. The gasoline octane rating only refers to the octane number of the gasoline, representing its anti-knock properties. It has no relation to purity; what truly affects gasoline purity is the collection and transportation process. The higher the octane rating, the more octane it contains, and the better its anti-knock performance. Here are some details about the Toyota Camry: 1. Exterior: The eighth-generation Camry features dual styling designs—Luxury and Sport—both inspired by Toyota's latest "Keen-Look" design language. The Luxury version adopts a large trapezoidal horizontal grille, with a streamlined body posture, lower waistline, and an extended rear roofline that increases rear headroom. 2. Interior: The eighth-generation Camry has undergone significant changes. All three models share the same interior design, differing only in the material of the decorative panels above the glove box and near the gear lever. The interior adopts an asymmetrical design, with a Y-shaped curve on the dashboard. 3. Features: The eighth-generation Camry is equipped with Toyota's latest Toyota Safety Sense, including the Pre-Collision System (PCS), Lane Departure Alert (LDA), Automatic High Beam (AHB), and Dynamic Radar Cruise Control (DRCC), providing enhanced driving assistance for greater safety.
3
1
Share

What are the reasons for brake noise?

Brake noise occurs due to: 1. When the brake discs rub against each other, they generate some metal powder, which can cause unusual sounds when braking. Such noises from the brake pads are normal phenomena; 2. Brake noise may indicate that the brake pads have worn to their limit, causing the brake warning shim to rub against the brake disc, resulting in a metal-on-metal sound. Solutions for brake noise: 1. Firmly pressing the brakes several times or performing emergency stops in an open area can improve the situation; 2. It is necessary to promptly replace the car's brake pads to prevent potential hazards.
18
1
Share

What are the body dimensions of the Audi A5?

Audi A5 body dimensions are: length 4757mm, width 1843mm, height 1358mm, wheelbase 2826mm, fuel tank capacity 54L, luggage compartment capacity 480L, and curb weight 1640kg. Taking the 2021 Audi A5 as an example, it belongs to the midsize car category with a 5-door, 5-seat hatchback body structure. The 2021 Audi A5 features a five-link independent suspension both in the front and rear. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 204PS, maximum power of 150kW, maximum torque of 320Nm, and is paired with a 7-speed dual-clutch transmission.
7
3
Share

Where is the water temperature gauge located on the MG ZS?

The water temperature gauge of the MG ZS is displayed on the right side of the central instrument panel. To check the water temperature gauge: Step on the brake pedal of the MG ZS, press the one-touch start button, and the instrument panel of the MG ZS will light up, indicating that the vehicle's power is fully connected. Meaning of the water temperature gauge: One mark on the MG ZS water temperature gauge represents 50 degrees Celsius, while four marks indicate the normal operating temperature of 90 degrees Celsius. Function of the water temperature gauge: The car water temperature gauge indicates whether the engine's cooling system is functioning properly. It consists of a pointer, scales, and the letters C and H, where C represents 60 degrees Celsius and the red H mark indicates 110 degrees Celsius. The primary function of the car water temperature gauge is to display the temperature of the coolant in the radiator while the engine is running, with the scale measured in degrees Celsius. When starting the engine, the water temperature gauge should read no lower than 50 degrees Celsius; during normal driving, the normal reading should be between 80-90 degrees Celsius.
1
2
Share

What Are the Reasons for the Vehicle's Engine Malfunction Light Staying On?

The reasons for the vehicle's engine malfunction light staying on are: 1. Sensor damage, poor contact, or signal interruption; 2. Poor engine maintenance; 3. Poor quality of fuel and oil; 4. Incomplete combustion of the air-fuel mixture; 5. Spark plug or ignition coil failure; 6. Fuel pump failure or clogged fuel lines; 7. Clogged air filter. The solutions for the vehicle's engine malfunction light being on are: 1. Use fuel additives to clean the entire fuel system; 2. After cleaning the engine, use higher-grade gasoline; 3. Use high-quality fuel additives to improve the cleanliness level of the fuel; 4. Replace the catalytic converter.
7
4
Share

How to Bleed Car Brakes?

Method for bleeding car brakes: Requires two people to complete. One person sits in the driver's seat and steps on the brake pedal to generate brake pressure. The other person works underneath the vehicle to release the air. The person pressing the brake pedal must firmly depress it and keep it pressed without releasing until the person underneath finishes bleeding the brakes. If a wheel's brake cylinder has issues or a new brake caliper is replaced, bleed that wheel's brakes. If the brake pedal still feels soft after bleeding, proceed to bleed the other wheels' brake cylinders. Always check and top up the brake fluid during the bleeding process.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.