Which Lynk & Co 02 model has a four-cylinder engine?

1 Answers
VonTeagan
07/29/25 10:17pm
Lynk & Co 02-2.0T is equipped with a four-cylinder engine. Below is the relevant information: 1. Positioning: The Lynk & Co 02 Hatchback is positioned as a compact hatchback. The vehicle focuses on sportiness and performance, making it more suitable for young people as a personal commuter. 2. Exterior: The Lynk & Co 02 Hatchback adopts the brand's signature design language, featuring more aggressive front and rear bumpers and blackened dual quad-exhaust pipes that further highlight its sporty character. Dimensions are 4458*1890*1486mm with a wheelbase of 2702mm. 3. Powertrain: The Lynk & Co 02 Hatchback is powered by a 2.0T turbocharged engine across the lineup, paired with an 8-speed automatic transmission. It delivers a maximum power of 187KW (254 horsepower) and a peak torque of 350Nm.
Was this review help?
7
0
Share
More Forum Discussions

What is the problem if the car is started but not moving?

It may be that the handbrake is not released. If it is not, release it and shift gears again. The following is an introduction to car ignition: 1. Introduction: The car ignition system is designed for spark-ignition engines to work properly. It supplies the spark plugs with high-voltage electricity (approximately 15,000 to 30,000V) in the correct firing order for each cylinder, enabling the spark plugs to generate a strong enough spark to ignite the combustible mixture. 2. Traditional ignition: The working process of a mechanical ignition system involves the crankshaft driving the distributor shaft to rotate. The cam on the distributor shaft turns, causing the primary contacts of the ignition coil to open and close, thereby generating high-voltage electricity. 3. Electronic ignition: The electronic ignition system is completely different from the mechanical ignition system. It has an electronic control device for ignition, which contains the ignition control curve (MAP) required by the engine under various operating conditions.
11
4
Share

What Causes the Left Side to Be Narrower Than the Right Side in Parallel Parking?

If the left side is narrower during parallel parking, it may be because the rear wheel pressed the line too early when turning left sharply, causing the wheel to turn before it was properly aligned with the line. Below are some related details about parallel parking: 1. Traditional parallel parking: Four poles were placed on the ground to symbolize the four corners of the parking space. One of the criteria for successful parking was whether the vehicle entered the space smoothly without touching these poles. 2. After the implementation of new traffic regulations: Parallel parking no longer uses poles; instead, ground markings are used to define the parking space boundaries. For learners obtaining a C1 driver's license, the length of the parallel parking space is 1.5 times the vehicle length plus 1 meter. The vehicle should be driven parallel to the parking space, then reversed into the space without any pauses. As long as the vehicle is parked within the marked boundaries without crossing the lines, it is considered a pass.
3
1
Share

What adhesive should be used for a detached car roof liner?

The detachment of the car roof liner is generally caused by the aging of the fabric sponge. Special automotive glue or adhesive products can be used for bonding and fixing. Relevant explanations are as follows: 1. Glue bonding and fixing: Car owners can purchase a bottle of special automotive glue or adhesive products online, ensuring the glue is heat-resistant. Spray the glue along the detached area and then bond and fix it. 2. Fixing with clips: If the detachment is in the middle of the roof, it may be difficult to repair with glue. Car owners can opt for fixing with clips. Although the visual effect of the repair may not be ideal, it is generally acceptable. 3. Complete roof liner replacement: First, remove the roof liner, clean off the aged sponge on the surface, prepare a new piece of roof liner fabric, and use special roof liner glue. Apply glue to both sides, let it dry for 3-5 minutes, then bond them together. Finally, reinstall the roof liner. It is recommended that car owners leave this repair to a professional auto repair shop.
10
5
Share

What are the effects of a damaged pressure bearing?

Damaged pressure bearings can have the following effects: significantly increased tire noise while driving, with a buzzing sound in severe cases; and deviation in steering direction. Methods to prevent damage to pressure bearings: 1. Since pressure bearings bear part of the vehicle's weight and the vibrations generated during driving are transmitted through the suspension system to the pressure bearings, it is advisable to choose roads with better conditions and avoid rough roads. 2. When passing speed bumps, reduce speed and minimize driving over curbs, as excessive speed can lead to premature failure of pressure bearings. 3. Try to avoid turning the steering wheel while the vehicle is stationary. When the vehicle is stationary, the friction between the tires and the ground is greatest, and the pressure on the pressure bearings is also at its maximum. Reducing stationary turning can extend the service life of pressure bearings.
17
4
Share

How to Solve the Problem of Abnormal Noise in New Car Brakes?

Solutions for abnormal noise in new car brake discs: 1. If it's a screeching sound, first check if the brake pads are nearly worn out and the alarm piece is making noise. If they are new pads, check for any foreign objects caught between the brake disc and the pad. 2. If it's a dull sound, it's mostly an issue with the brake caliper, such as worn sliding pins or a fallen spring plate. 3. If it's a hissing sound, there could be multiple issues: the caliper, brake disc, or brake pads might be problematic. If the noise persists, first check for any dragging brakes. Poor caliper resetting can cause prolonged friction between the disc and pad, leading to abnormal noise under certain conditions. Then, check for any foreign objects stuck between the pad and disc. If the pads are new, inspect whether the brake disc has grooves, as localized friction can cause noise. If the disc is fine, consider whether the brake pads are too hard or if the noise-damping shims were installed incorrectly.
9
1
Share

Why does the car cross the line when exiting from parallel parking?

It is usually caused by reversing into the parking space too late. When the entire vehicle enters the space, it can no longer be straightened, resulting in directly crossing the right boundary line. Below are relevant explanations about parallel parking: 1. Traditional parallel parking: Four poles were placed on the ground to symbolize the four corners of the parking space. Whether the vehicle successfully entered the space and whether it touched these four poles was one of the criteria. 2. After the implementation of new traffic regulations: Parallel parking no longer uses poles, but instead adopts ground markings as the boundaries of the parking space. For learners obtaining a C1 driver's license, the length of the parallel parking space is 1.5 times the vehicle length plus 1 meter. Drive the vehicle to a position parallel to the parking space, then reverse into the space to the right rear without any pauses. As long as the vehicle is parked within this range without crossing the boundary lines, it is considered a pass.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.