Which listed companies produce automotive batteries?

1 Answers
LaLogan
07/29/25 5:45pm
Here is an introduction to listed companies that produce automotive batteries: 1. Shenzhen S.C New Energy Technology Corporation (Shenzhen S.C): Leveraging its R&D achievements and production experience in the field of can production equipment, the company is actively expanding into related areas such as new energy battery casings and other metal packaging products. 2. Fujian Nebula Electronics Co., Ltd. (Nebula Electronics): The company has extended its product line from testing systems to automated processes for lithium battery packs and overall solutions. It continues to expand its influence from the fields of 3C lithium battery testing, power tool lithium battery testing, and electric bicycle lithium battery testing into the areas of new energy vehicle power lithium battery testing and energy storage.
Was this review help?
4
2
Share
More Forum Discussions

What Causes the Rear of the Car to Cross the Line During Parallel Parking?

The reason the rear of the car crosses the line during parallel parking is either starting to park too early or being too far from the line. You can drive forward a little more before stopping to ensure the car body is slightly closer to the parking space line. When parking, try to stay slightly to the right, which makes it easier to reverse into the parking space, while also paying attention to the distance between the front and rear. More details are as follows: 1. Definition of Parallel Parking: Parallel parking is part of the second subject in the driver's license test. It is increasingly common in urban areas, especially as parking spaces in formal lots become more limited. Many places now designate parking spaces along the sides of streets, creating "parallel parking spaces." 2. Changes: In the past, parallel parking used four poles placed on the ground to symbolize the four corners of the parking space. One criterion for successful parking was whether the vehicle entered the space without touching these poles. After the new traffic regulations were implemented, parallel parking no longer uses poles; instead, ground markings define the boundaries of the parking space. For students learning to drive with a C1 license, the length of the parallel parking space is 1.5 times the vehicle's length plus 1 meter. The vehicle must be driven parallel to the parking space, then reversed into the space in one continuous motion without stopping. As long as the car is parked within the boundaries without crossing the lines, it is considered a pass.
7
3
Share

What Causes Low-Speed Jerking?

Transmission jerking is the impact sensation caused by the inertia of moving parts inside the engine. Below are the reasons for engine jerking: 1. Causes of engine jerking: During the process where the engine speed is either increased or decreased, if not handled properly, sudden changes in engine speed during gear shifts can cause the inertia of the engine's moving parts to react against the vehicle body. 2. Low-speed jerking: Many drivers experience this issue. When driving at low speeds, the gear frequently shifts between first and second, and the clutch repeatedly engages and disengages. If power transmission cannot be smoothly completed within a short time, common low-speed jerking occurs. Jerking sensations are normal during startup and low-speed driving, usually due to turbocharger engagement at low RPMs, which affects engine speed. 3. Upshift jerking: This is mostly caused by the transmission's response speed being insufficiently fast. The upshift speed cannot keep up with the throttle input, so the jerking sensation occurs at the moment of gear shift. 4. Downshift jerking: This is mostly due to the intervention of the energy recovery system. Once the driver releases the throttle pedal or presses the brake pedal, the generator immediately starts working, placing additional load on the engine. This affects the engine speed, causing it to be out of sync with the clutch plate speed, resulting in a jerking sensation.
16
2
Share

Where is the best position for the reversing mirror?

Generally, it is attached to the outer side of the rearview mirror. Due to its small size, the small circular mirror hardly affects the field of view of the rearview mirror. Below are the functions of the reversing mirror: 1. Ensuring driving safety: The rearview mirror is an ideal auxiliary product for ensuring driving safety, expanding the driver's perspective, and facilitating overtaking and lane changes. 2. Reversing aid: The small circular mirror is also an ideal reversing aid, usually installed on the outer side of the left and right rearview mirrors. 3. Viewing the side of the vehicle: When the small circular mirror is installed on the rearview mirror, the driver can see the condition of the vehicle's side and the rear wheels, thus maximizing the use of the small circular rearview mirror.
11
0
Share

Where to Apply for a Replacement of Motor Vehicle Driving License?

You need to go to the local Vehicle Management Office to apply for a replacement. To replace a motor vehicle driving license, you will need the identity proof of the motor vehicle driver and a written statement of the loss of the driving license. The replacement can be issued within one working day. During the period when the driving license is lost, driving a motor vehicle is not allowed. Below are the relevant details: 1. Driving without a license is prohibited during the loss of the motor vehicle driving license: According to the relevant regulations of the Road Traffic Law, drivers must carry their motor vehicle driving license when driving. Otherwise, it will be treated as driving without a license. Upon discovering the loss of the driving license, you should carry the relevant documents and apply for a replacement as soon as possible. 2. The motor vehicle driving license can be replaced in a different location: According to Article 63 of the latest regulations on the application and use of motor vehicle driving licenses, after the loss of a motor vehicle driving license, the driver does not have to replace it at the place where the license was originally issued. It can be replaced at any Vehicle Management Office in any region.
8
3
Share

What are the materials of car covers?

Car covers are divided into PVC material, single-coated material, double-coated flame-retardant material, nano flame-retardant material, PU material, and Lajin flame-retardant material. Here is a detailed introduction to car covers: 1. Double-coated flame-retardant material: Sunproof, dustproof, rainproof, scratch-resistant, and flame-retardant, made with high-tech double-coated fabric and finely stitched. 2. Single-coated material: Good dustproof and sunproof effects, but not rainproof or scratch-resistant, can only be used on one side. Single-coated car covers are only available in silver, which effectively blocks UV rays. Single-coated car covers are lighter. 3. PVC material: Good dustproof and rainproof effects, but not sunproof or scratch-resistant, can only be used on one side. PVC car covers are only available in silver and are heavier. 4. Nano flame-retardant material: Sunproof, dustproof, rainproof, scratch-resistant, and flame-retardant, made with 560w nano fabric and finely stitched. 5. PU material car cover: A new type of material, this ultra-fine leather is called "ultra-fine fiber reinforced PU leather," which has excellent wear resistance, cold resistance, breathability, and aging resistance. 6. Lajin flame-retardant material: Sunproof, dustproof, rainproof, and scratch-resistant, can be used on both sides. Lajin car covers are made with 718V Oxford fabric as the base material and finely stitched.
3
0
Share

What Material Are Car Stickers Made Of?

Car stickers are primarily made of PVC outdoor-specific adhesive paper that can withstand outdoor conditions. Here is additional information: 1. Introduction to Car Stickers: Car stickers are a type of advertising material designed for affixing advertisements such as posters, images, or text onto surfaces like cars, exterior walls, or glass facades. The biggest advantage of car stickers is that after being applied to a surface, they can be easily removed and replaced later without leaving any adhesive residue. 2. Difference: High-precision car stickers and regular car stickers mainly differ in terms of precision. Regular car stickers are printed using a plotter, while high-precision car stickers are produced with an outdoor photo printer, resulting in a significant difference in clarity. 3. Materials: The surface of car stickers is smooth and glossy. PP paper (photo paper) has a matte finish, more like paper, and dissolves in water. Both types have adhesive on the back and can be affixed. Photo paper, used for printing photos, is thicker than the other two, with a smooth and glossy surface, but lacks adhesive on the back.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.