Which line should you stop on for precision parking?

2 Answers
LuciaLynn
07/28/25 11:37pm
Precision parking requires stopping at the optimal position where the middle of three white lines is located on the slope. The parking area has three lines: dashed line — solid line — dashed line. The requirement is for the front bumper to align with the middle solid line. Tips for precision parking: After getting in the car: Always adjust the seat properly, with your back against the seat and your wrists level with the steering wheel as the standard. Perform this check every time you enter the vehicle. Additionally, when driving uphill, keep your head fixed against the headrest before identifying your reference point. After fixing your head position: Use the left rearview mirror to locate the ground line, which marks the stopping point. Alternatively, use reference points like the right front pole, windshield wiper, B-pillar, or other markers. Once these references are established, always use them to determine your stopping point. When the right wiper aligns with the parking pole during precision parking, immediately press the clutch and brake. Some instructors may teach students to stop as soon as the slope's yellow line becomes fully visible in the left rearview mirror. However, methods vary by instructor, and reference points should ultimately follow the test site's regulations.
Was this review help?
17
5
Share
JuniperLynn
08/12/25 3:58am
When I was learning to drive, the instructor always emphasized that fixed-point parking should stop at the innermost edge of the roadside white line, with the wheels not crossing or exceeding the line. For example, during the driving test, there are often specific positions requiring us to park precisely within the white line area, ensuring the car doesn't obstruct the bike lane or pedestrian path. In actual practice, I've developed the habit of slowly reversing while aligning the edge line through the rearview mirror. If parked too close to the middle of the road, it might lead to scratches from passing vehicles or even a ticket. Safety first—the correct position ensures more stability when opening doors and getting in or out. Remember, parking lines are meant to demarcate safe zones; staying within them avoids trouble. Also, pay attention to weather conditions—extra caution is needed when the ground is slippery during rain.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

What is the emission standard of the Haval H2s?

The Haval H2s complies with the China V emission standard, which is equivalent to the Euro 5 emission standard currently implemented in Europe. It imposes stricter limits on vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. The dimensions of the Haval H2s are: length 4195 mm, width 1772 mm, height 1638 mm, with a wheelbase of 2550 mm. The Haval H2s is equipped with a 1.5T turbocharged engine, delivering a maximum power of 110 kW and a maximum torque of 210 Nm. It is paired with a 7-speed dual-clutch transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is torsion beam non-independent suspension.
7
4
Share

What sound system does the BMW 3 Series use?

BMW 3 Series uses Harman Kardon sound system, which specifically refers to a set of audio equipment that produces sound. The BMW 3 Series measures 4719mm in length, 1827mm in width, and 1459mm in height, with a wheelbase of 2851mm. It has a fuel tank capacity of 59 liters, front and rear tire specifications of 225/45R18, and a body structure of a 4-door, 5-seater sedan. The BMW 3 Series is equipped with a 2.0T turbocharged engine, delivering a maximum power of 115kW at 4500 to 6500rpm and a maximum torque of 250Nm. It is paired with an 8-speed automatic transmission. The front suspension type is a double-joint spring strut front axle, and the rear suspension type is a multi-link independent suspension.
7
1
Share

Why Does a Manual Transmission Car Jerk When Accelerating?

The reasons for jerking when accelerating in a manual transmission car are: 1. Excessive carbon buildup in the throttle body, fuel injectors, and intake manifold; 2. Poor fuel quality leading to incomplete combustion; 3. Faulty spark plugs or ignition coils. A manual transmission works by changing the gear ratio through the shift fork, thereby altering the driving torque to suit different driving conditions. The method for driving a manual transmission car is: 1. Fully depress the clutch pedal; 2. Move the gear lever to engage the 1st gear, which is the starting gear; 3. Gently press down the turn signal lever to activate the left turn signal, alerting vehicles in front and behind; 4. Press the horn button to alert pedestrians in front of the vehicle that you are about to start; 5. Release the vehicle's handbrake; 6. Gradually lift the left foot until the clutch reaches the half-clutch point, at which the vehicle begins to vibrate slightly; 7. As the vehicle starts moving, release the clutch and gently press the accelerator.
3
1
Share

What is the installation method for the reversing camera of Wuling Hongguang S?

Wuling Hongguang S reversing camera installation method is: install the camera, screen, and reverse gear switch, and connect the wiring. The Wuling Hongguang S is a microvan under SAIC-GM-Wuling. Taking the 2020 Wuling Hongguang S as an example, its body dimensions are: length 4390mm, width 1660mm, height 1750mm, with a wheelbase of 2720mm. The 2020 Wuling Hongguang S is equipped with a 1.2L naturally aspirated engine, with a maximum power of 56kW and a maximum horsepower of 76PS. Its front suspension uses a MacPherson independent suspension, and the rear suspension uses a leaf spring non-independent suspension.
16
0
Share

What causes a car to start and then stall automatically?

The reasons for a car starting and then stalling automatically are: 1. The installed anti-theft system has not been deactivated; 2. Excessive carbon buildup in the throttle body, spark plugs, cylinders, fuel lines, or intake ducts; 3. Ignition system malfunction; 4. Low-voltage circuit failure; 5. Insufficient cylinder pressure; 6. Low fuel level in the tank or insufficient fuel pump pressure; 7. Leakage in the distributor wires; 8. Engine malfunction; 9. Clogged single or multiple fuel injectors. The correct steps for starting a car are: 1. Place the gear in P or N position; 2. Turn the key to the ON position and wait for about 10 seconds; 3. If the vehicle self-check is normal, you can start the engine.
10
5
Share

How to Shift Gears in S Mode for Cars?

Car S mode gear shifting correct method is: 1. Shift the gear to S mode, push the gear lever to the right, the transmission first enters sport mode; 2. Use the method of pushing the gear lever forward and backward to shift gears, pushing forward is upshift, pushing backward is downshift; 3. Switch to automatic mode by directly pushing left to D gear position to complete gear shifting. S mode is the sport mode of the car. In S sport mode, the transmission can shift freely, but the shifting timing will be delayed, keeping the engine at high speed for a longer time, allowing the car to travel at low gear and high speed for a longer time, thereby obtaining greater torque output and acceleration.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.