Which Light to Use When Starting the Car?

Is It Necessary to Press the Brake When Shifting Gears Manually?

When shifting gears, it is not necessary to press the brake. Instead, you need to press the clutch pedal. Below is an introduction to manual gear shifting operations: Pull-Up Type: This method is commonly used in American car models. To shift into reverse gear in such manual transmission cars, you need to pull up the ring under the gear knob before shifting into reverse. Direct Shift Type: This method is also commonly used in American car models. The reverse lock in this type is located inside the transmission, usually a spring with relatively high tension. When shifting into reverse, you need to overcome relatively high resistance, and the driver will feel a noticeable feedback. Press-Down Type: Most manual transmission models under the Volkswagen brand use this method. To shift into reverse gear, you need to press the gear lever down firmly and then move it to the reverse position.

14

1

Share

Can You Drive When the Car Battery Light Is On?

When the car battery light is on, you should not continue driving as it may lead to over-discharge issues. The relevant details are as follows: Introduction to Over-Discharge: Over-discharge refers to excessive discharging. When a battery discharges, the stored electrical energy is gradually released, and the voltage slowly drops. When the voltage decreases to a specified value, the discharge should be stopped, and the battery should be recharged to restore its energy storage state. Continuing to discharge below this specified value constitutes over-discharge, which may damage the electrode's active material, reduce its reaction capability, and shorten the battery's lifespan. Impact of Over-Discharge on Battery Performance: In areas with frequent power outages (even up to three full days of blackout per week), outdoor-use batteries may discharge to 0V without timely recharging, leading to severe sulfation of the battery. This is extremely detrimental to the battery's lifespan.

12

2

Share

What are the functions of the Geely Vision X3 automatic transmission?

Below is an introduction to the usage instructions for each gear: P (Parking Gear): When the gear lever is in this position, the drive wheels are mechanically locked, and the engine can be started. To shift from Parking Gear (P) to Drive Gear (D) or Reverse Gear (R), the brake pedal must be pressed, and the gear unlock button must be pressed. R (Reverse Gear): The gear for driving backward. When the vehicle is stationary, to shift from Reverse Gear (R) to Parking Gear (P), simply press the unlock button on the gear lever without stepping on the brake pedal. To shift from Reverse Gear (R) to Neutral Gear (N) or Drive Gear (D), no unlock button or brake pedal is required. N (Neutral Gear): When the gear lever is in this position, the transmission idles, and the engine power cannot be transmitted to the drive wheels, nor can it provide engine braking. When the vehicle is stationary, and the power is in the ON position with the engine running, to shift from Neutral Gear (N) to Parking Gear (P) or Reverse Gear (R), the unlock button must be pressed, and the brake pedal must be stepped on. To shift from Neutral Gear (N) to Drive Gear (D), simply push the gear lever. D (Drive Gear): The normal driving gear (automatic transmission). When the vehicle is stationary and the ignition is in the ON position, to shift from Drive Gear (D) to Reverse Gear (R) or Parking Gear (P), the gear unlock button must be pressed, and the brake pedal must be stepped on. To shift to Neutral Gear (N), simply push the gear lever. When the vehicle is moving, to shift from Drive Gear (D) to Neutral Gear (N), simply push the gear lever.

2

4

Share

What Causes the Car Lights to Suddenly Stop Working?

Car lights may stop working due to issues with bulbs, switches, etc. Here are the details: Check the Brake Light Bulb: The brake light is the most frequently used light in a car, and bulbs have a relatively short lifespan. When the brake light stops working, the first thing to consider is the brake light bulb. Replacing the bulb should solve the issue. Check the Brake Light Switch: If the brake light switch is faulty, none of the brake lights will work. During inspection, you can use a wire to bridge the brake light switch. If the brake lights come on, it indicates the switch is faulty, and replacing the switch will resolve the problem. Check the Fuse: If both the bulb and switch are confirmed to be functioning properly, the next step is to check the fuse. Some cars do not have a separate fuse for the brake lights and share one with other electrical devices. In this case, you can check the operation of other electrical devices in the car. Identify any non-working devices and replace the corresponding fuse.

8

4

Share

How Long Does It Take from Car Purchase to Delivery?

It depends on the car model, and the time varies between imported and domestic vehicles. If the 4S store has inventory, you can drive it away immediately. For domestic cars, the longest wait is half a month. For imported cars without stock, it takes at least three months. Below are some precautions when taking delivery of the car: Regarding vehicle documents: Purchase invoice, certificate of conformity, vehicle type approval certificate, vehicle registration certificate, warranty certificate, vehicle user manual, and new car delivery confirmation form. If the 4S store handles the license plate registration and insurance, you will also need to obtain the original insurance policy, insurance invoice, compulsory traffic insurance invoice, vehicle and vessel tax invoice, purchase tax invoice, tax payment certificate, and compulsory insurance label from the salesperson. Vehicle inspection: For the exterior, check the paint, production date of the window glass, tires, trunk, and engine. For the interior, focus on inspecting car functions such as lights, wipers, windows, rearview mirrors, dashboard, air conditioning, audio system, etc.

11

2

Share

How long does it take to drive after replacing the windshield?

Some windshield adhesives are quick-drying and can solidify in about 1-2 hours, while others may take around 6 hours. Currently, the standard adhesive on the market requires approximately 24 hours to ensure safe driving. Below is an introduction to windshields: Function: Laminated glass consists of a transparent adhesive plastic film sandwiched between two or three layers of glass, combining the toughness of plastic with the hardness of glass to enhance the glass's resistance to shattering. Tempered glass is made by quenching ordinary glass to create internal stress, thereby strengthening the glass. When impacted and shattered, tempered glass breaks into small, blunt-edged fragments, reducing the risk of injury to passengers. Maintenance tips: Choose the appropriate windshield washer fluid. When the windshield surface becomes blurry, cleaning it with suitable washer fluid can significantly improve clarity. If you notice excessive glare at night, wiping the glass with washer fluid can help. Additionally, during high-speed driving or in dusty conditions, washer fluid is consumed quickly, so it's important to refill it promptly.

3

0

Share

Which Light to Use When Starting the Car?

Is It Necessary to Press the Brake When Shifting Gears Manually?

Can You Drive When the Car Battery Light Is On?

What are the functions of the Geely Vision X3 automatic transmission?

What Causes the Car Lights to Suddenly Stop Working?

How Long Does It Take from Car Purchase to Delivery?

How long does it take to drive after replacing the windshield?

How Much Engine Oil Should Be Added?

Why Does the Car Shake While Driving?

How to Distinguish Good and Bad Engine Oil?

Can a C2 license holder drive a car with a manual-automatic transmission?