Which lane should you drive in on a four-lane road with a speed limit of 110?

2 Answers
LolaMarie
07/24/25 5:24am
On a four-lane road with a speed limit of 110, you should drive in the leftmost lane, which is the fast lane with a minimum speed limit of 110 km/h. Therefore, vehicles traveling above 110 km/h should use the leftmost lane. According to Article 78 of the "Regulations for the Implementation of the Road Traffic Safety Law," highways must indicate the speed limits for each lane. The maximum speed should not exceed 120 km/h, and the minimum speed should not be lower than 60 km/h. For roads with two lanes in the same direction, the minimum speed for the left lane is 100 km/h. For roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h. If the speed limit indicated by road signs conflicts with the above lane speed regulations, drivers should follow the speed limit indicated by the road signs. Highway driving precautions: Stay away from large vehicles. This is very important—do not tailgate or drive side by side with them. If you stay behind a large vehicle, your visibility will be blocked, and if the large vehicle suddenly brakes, it can be very dangerous. Large vehicles often have blind spots, so driving alongside them is also risky. Stay focused: When driving on the highway, you must concentrate and stay alert. Because highway speeds are high, even a few seconds of distraction can mean your car has traveled dozens of meters, which is extremely dangerous. If there are passengers in the car, keep conversations light to avoid distraction.
Was this review help?
7
2
Share
DiLeonardo
08/11/25 1:06am
When I was driving on the highway before, I often encountered four-lane sections with a speed limit of 110 km/h, which is typically the design of main arterial highways. Multiple lanes combined with moderate speeds allow traffic to flow smoothly, reducing congestion and making the drive quite comfortable. However, it's important to follow safety rules—use turn signals when changing lanes and maintain a following distance of at least 100 meters, as the risk of accidents increases with more fast-moving vehicles. In certain sections, such as mountainous areas or regions with adverse weather, speeds are capped at 110 km/h to enhance safety. I've driven on these roads several times, and the experience has been good, but you should never exceed the speed limit. Vehicle maintenance is also crucial—regularly check your tires and braking system to ensure quick responsiveness at high speeds.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

Where is the Golf tire pressure warning light reset button located?

Golf tire pressure warning light reset button is located below the left side of the steering wheel, which is the SET button. Reset method: Turn on the ignition switch, adjust the tire pressure, then press and hold the tire pressure reset button for 3 seconds. In terms of appearance, the Golf features more streamlined contours that create a sportier and more robust silhouette, with sharp angular waistlines that visually lower the vehicle's center of gravity. For the interior, the Golf maintains a traditional, simple and practical design style, with meticulous attention to detail in craftsmanship and more abundant configurations compared to the older model. Regarding the suspension, the Golf is equipped with MacPherson strut independent suspension at the front and torsion beam non-independent suspension at the rear.
13
0
Share

What engine does the Freelander 2 use?

The Freelander 2 is equipped with a 2.2T and 2.0T turbocharged engine. The 2.0T engine has a maximum power of 176.5 kW and a maximum torque of 340 Nm, while the 2.2T engine has a maximum power of 140 kW and a maximum torque of 420 Nm. In terms of appearance, the Freelander 2 combines the rugged geometric shape of an SUV with the smooth and rounded lines of a luxury car. The steep windshield, stepped roof, tapered rear wheel pillars, and flowing shoulder lines highlight the sporty nature of the new Freelander 2. In terms of body dimensions, the Freelander 2 has a length, width, and height of 4500 mm, 1910 mm, and 1740 mm respectively, with a wheelbase of 2660 mm.
16
5
Share

Why is the TC indicator light on the Buick GL8 dashboard illuminated?

The reasons for the TC indicator light being illuminated on the Buick GL8 dashboard are: 1. Solenoid valve failure; 2. Dirty engine oil clogging the solenoid valve filter screen; 3. Wear of the actuator gear and impeller causing oil pressure leakage, triggering the alarm; 4. Dirty throttle with an opening reaching 20%, causing the engine computer to misjudge a TC fault. In terms of appearance, the Buick GL8 maintains its exterior design, featuring a waterfall-style grille paired with a winged chrome strip. The winged chrome strip runs through the double-layer combination full LED headlights, which have rich layers, giving the overall design a strong sense of power. Regarding body dimensions, the Buick GL8 measures 5203 mm in length, 1878 mm in width, and 1805 mm in height, with a wheelbase of 3088 mm.
3
1
Share

What does AUX mean in a car?

AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to the AUX interface, the audio from electronic devices can be transmitted through the headphone jack and AUX interface to the car audio system, allowing the audio to be played through the car's audio broadcasting facilities. The USB interface can be used to insert a USB drive for audio playback. To use it, connect one end to the AUX interface and the other end to a mobile phone, MP3, MP4, or other video player. This allows you to listen to songs or niche music anytime, anywhere, without being limited to car music CDs. However, if the playback device runs out of power, the music will stop (the interface is typically a 3.5mm standard headphone jack). Aux is short for Auxiliary, which refers to an additional signal line design. In general audio equipment, besides the standard output and input terminals, there are often several terminals labeled Aux, serving as backup connection points. These can be used for special applications, such as additional audio output or input. These backup terminals or lines, whether for input or output, are collectively referred to as Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connections, or connecting to a MODEM via a transceiver. It supports hardware flow control. The AUX port is usually placed alongside the CONSOLE port because they are used in different configuration environments. The AUX interface establishes a command-line connection between the user and the device, enabling operations that are typically impossible in user mode, such as initialization, restoring default configurations, or correcting abnormal user modes. It provides a fixed port for the device, which can be used as a standard asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, remote configuration and line backup for hardware products can be achieved. Note: When using the AUX interface, ensure you purchase the correct connecting cable and avoid plugging the audio cable into the wrong port. It's best to follow the steps outlined in the product's user manual. If you're unsure, consult the product's official website or call customer support for guidance.
19
4
Share

How to Tell If Engine Oil Level is Increasing?

Methods to check for increased engine oil level: 1. Park the car on a relatively flat surface, turn off the engine and wait for more than five minutes to allow the oil to completely flow back. It is recommended to perform the measurement at the same parking spot each time; 2. Open the engine compartment, locate the oil dipstick, pull it out, and check if the oil level is between the two marks on the dipstick; 3. To ensure accuracy, first wipe the dipstick clean with a paper towel, then reinsert it into the engine. Oil level increase commonly occurs in direct injection engines and is often observed during winter. In direct injection engines, fuel is directly injected into the cylinder, unlike port fuel injection where there is more time for the fuel to mix with air. Some fuel may be sprayed onto the cylinder walls, causing wetting.
18
2
Share

Where is the VIN number located on a smart car?

smart car's VIN number is located at the lower right corner of the front windshield. For vehicle inspection purposes, the VIN to be imprinted should be found in front under the front passenger seat - just lift the panel to locate it. The VIN (Vehicle Identification Number) is a unique 17-character alphanumeric code that identifies a vehicle's manufacturer, engine, chassis number, and other specifications. smart is a microcar brand under Mercedes-Benz, with dimensions of 2695mm in length, 1663mm in width, and 1555mm in height, featuring a wheelbase of 1873mm. In terms of suspension, the smart car uses MacPherson strut independent suspension at the front and torsion beam semi-independent suspension at the rear.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.