Which lane should you choose when driving on a road with lane traffic signals?

1 Answers
VanParker
07/29/25 10:06pm
On a road with lane traffic signals, you should choose the lane indicated by a green arrow. Drive in the lane to which the arrow is pointing. Legal provisions: When a motor vehicle passes through an intersection controlled by traffic signals, it shall proceed in accordance with the following provisions: at an intersection with marked guide lanes, enter the guide lane according to the intended direction of travel; motor vehicles already within the intersection preparing to enter a roundabout have the right of way; when turning left, turn from the left side near the center point of the intersection. Turn signals must be activated when turning, and low beams must be used at night. Function of traffic signals: Traffic signals are lights that direct traffic flow, generally consisting of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning.
Was this review help?
18
3
Share
More Forum Discussions

How to Solve Shock Absorber Oil Leakage?

Shock absorber oil leakage cannot be repaired; the only solution is to replace it with a brand-new shock absorber. The oil leakage is caused by the aging of the oil seal. Once the shock absorber leaks oil, it will affect the car's chassis feel and handling performance. If the shock absorber shows severe oil leakage, it must be replaced immediately. During the installation of the shock absorber, a professional torque wrench must be used to tighten the screws according to the specified torque. After installing the new shock absorber, it is recommended to perform a four-wheel alignment to prevent the car from pulling to one side or uneven tire wear. It is advisable to choose original equipment manufacturer (OEM) shock absorbers. If OEM products are not available, opt for shock absorbers from reputable brands or those suitable for the owner's vehicle.
15
1
Share

Where is the fuse for the BYD F3 located?

The fuse for the BYD F3 is located on the left side of the steering wheel. There is a fuse box above the clutch in the driver's compartment. The specialized tool for removing fuses is inside the fuse box in the engine compartment, which also contains spare tools. The BYD F3 has two fuse boxes in total: one is responsible for the safety of external electrical components, and the other ensures the normal operation of internal electrical components. Generally, they are located on the left side of the steering wheel. The fuse is also called a circuit breaker. The purpose of an automotive fuse is similar to that of a household fuse—it melts when the circuit current is abnormal and exceeds its rated current, thereby acting as a protective barrier for the circuit. Automotive fuses can be roughly divided into two types: fast-blow fuses and slow-blow fuses.
3
4
Share

What to Do When the Car's Primer is Scratched?

Solutions for scratches on the car's primer: 1. If the scratch is not very noticeable, it can be repaired by waxing; 2. For deeper scratches, polishing can be used to remove them; 3. If there is denting after the scratch, it is necessary to go to a repair shop for panel beating and painting; 4. When the scratch exposes the primer, a touch-up paint pen can be used for simple primer repair. The car primer is the first layer of paint on the vehicle's body, serving to protect the body. It directly contacts the body, which is mainly made of metal, requiring the primer to have good anti-corrosion and anti-rust properties. Additionally, it must have excellent adhesion, both to the body and to the topcoat.
12
3
Share

How often should the vehicle inspection compliance sticker be replaced?

Replacement frequency for vehicle inspection compliance stickers: For passenger vehicles and new cars, inspections are required every two years for the first 6 years. After reaching 15 years of age, inspections are required every six months. A new compliance sticker is issued after each inspection, with the valid date clearly marked on the sticker. Regular vehicle inspections help promptly identify potential safety hazards, encourage proper vehicle maintenance, and reduce traffic accidents. Required documents for vehicle inspection include: the vehicle license, compulsory traffic accident liability insurance certificate, and vehicle safety technical inspection compliance certificate. Vehicle annual inspection refers to mandatory testing for all vehicles with official license plates and registration certificates, essentially serving as an annual physical examination to verify compliance with road safety technical requirements.
14
2
Share

Where is license plate Yue K from?

Yue K is the license plate of Maoming City, Guangdong Province. The license plates of other regions in Guangdong Province are as follows: Yue A is Guangzhou, Yue B is Shenzhen, Yue C is Zhuhai, Yue D is Shantou, Yue E is Foshan, Yue F is Shaoguan, Yue G is Zhanjiang, Yue H is Zhaoqing, Yue J is Jiangmen, and Yue K is Maoming. Maoming City is a coastal city located in the southwest of Guangdong Province, serving as an important petrochemical production and export base in southern China and an energy base of Guangdong Province. License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of vehicles, usually made of aluminum, iron, plastic, or paper, engraved with the vehicle's registration number, registration region, or other relevant information.
6
3
Share

What is EPS?

EPS is the abbreviation for Electric Power Steering, which refers to the electric power steering system. It consists of a mechanical steering system along with components such as a torque sensor, vehicle speed sensor, electronic control unit, reducer, and motor. When the driver operates the steering wheel, the torque sensor detects the steering direction and the magnitude of the torque, sending a voltage signal to the electronic control unit. Based on the torque voltage signal, steering direction, and vehicle speed signal detected by the torque sensor, the electronic control unit sends commands to the motor controller, causing the motor to output a corresponding magnitude and direction of steering assist torque, thereby providing auxiliary power.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.