Which lane should motorcycles use?

1 Answers
McBrantley
07/29/25 8:51pm
Motorcycles should use the motor vehicle lane. If there is a designated motorcycle lane, they must use it. If not, they generally drive in the rightmost lane but should not enter the non-motor vehicle lane. A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine and steered by handlebars that control the front wheel. It is lightweight, flexible, fast, and widely used for patrols, passenger and cargo transportation, as well as a sports equipment. Broadly speaking, motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. A motorcycle consists of five main parts: the engine, transmission system, running gear, braking system, and electrical instrumentation equipment.
Was this review help?
1
2
Share
More Forum Discussions

What is the difference between Chevrolet and Xuefulai?

The difference between Xuefulai and Chevrolet is only in the translation, there is no actual difference, but Chevrolet is the official name used. Chevrolet is a sub-brand under the General Motors Group, established on November 3, 1911. Many of its models have been domestically produced, and Chevrolet offers a wide range of sedans and SUVs. On November 3, 1911, the Chevrolet Motor Company was born. The first Chevrolet car, the Classic Six, was introduced in Detroit in 1912. In 1914, Chevrolet launched its first four-cylinder car, the Chevrolet Fours, among others. Representative sedans under the Chevrolet brand include the Malibu XL and the Camaro. Malibu XL 2022: Body dimensions are 4933mm in length, 1854mm in width, 1472mm in height, with a wheelbase of 2829mm. The trunk capacity is 520L. It is equipped with a 1.5L turbocharged engine producing a maximum horsepower of 169hp, maximum power of 124kw, and maximum torque of 250nm, using a 9-speed automatic transmission. Camaro: Body dimensions are 4786mm in length, 1897mm in width, 1356mm in height, with a wheelbase of 2811mm. It is equipped with a 2.0L turbocharged engine producing a maximum horsepower of 275hp, maximum power of 202kw, and maximum torque of 400nm, using an 8-speed automatic transmission.
19
3
Share

Where is the computer plug of Citroen C5 located?

The computer plug of Dongfeng Citroen C5 is located inside the armrest box. Here are the specific details about the Citroen C5: 1. The exterior dimensions of the Citroen C5 rank high in the M2 class (mid-to-high-end models), approaching the H class (high-end models). 2. The interior design of the Citroen C5 has a slightly stronger business-oriented atmosphere, as can be seen from the walnut wood decorations on the dashboard and doors, as well as the traditional air vents. 3. The interior design of the C5 is relatively stylish, featuring a two-tone color scheme, electrically adjustable front seats with leather upholstery, and unique shapes and functionalities. 4. In terms of power, the new Citroen C5 is equipped with a 1.6T-L4 turbocharged engine. The engine delivers a maximum horsepower of 167 PS and a maximum torque of 245 N·m, paired with a 6-speed automatic transmission. The official 0-100km/h acceleration time is 9.8 seconds, and the combined fuel consumption as per the Ministry of Industry and Information Technology is 6.5L/100km.
12
1
Share

What is the Difference Between Full-Time Four-Wheel Drive and Part-Time Four-Wheel Drive?

Here are the differences between full-time four-wheel drive and part-time four-wheel drive: 1. Different driving schemes: Full-time four-wheel drive: Cannot be turned off and is always in four-wheel drive mode. Part-time four-wheel drive: Allows control over turning the four-wheel drive mode on and off. 2. Different activation operations: Full-time four-wheel drive: No operation required. Part-time four-wheel drive: Has a dedicated switch to toggle between two-wheel drive and four-wheel drive modes. 3. Different transformation methods: Full-time four-wheel drive: Uses three differentials to achieve the driving force of four-wheel drive. Part-time four-wheel drive: The driver manually selects the driving force based on road conditions. Additional information: 1. Full-time four-wheel drive means that the vehicle is always independently propelled by all four wheels at any time. In English, "All-Wheel-Drive" is abbreviated as "AWD" to distinguish it from 2WD (which includes FWD and RWD). Full-time four-wheel drive distributes driving force to all four tires through a flexibly connected central differential and independent front and rear axle differentials. 2. Part-time four-wheel drive (PART-TIME-4WD) is a type of four-wheel drive system in vehicles, allowing the driver to switch between two-wheel drive and four-wheel drive modes by engaging or disengaging the transfer case based on road conditions, thus enabling free conversion between the two. Part-time four-wheel drive typically uses either the front or rear wheels for four-wheel drive during normal driving but can switch to four-wheel drive on snowy or gravel roads, also known as selectable four-wheel drive.
9
1
Share

What does VTI Honda mean?

Honda's VTI series refers to the high-end configuration. Honda vehicles are generally categorized into three levels: LXI, EXI, and VTI, with three different logos used to distinguish the vehicle configurations. The VTI is the high-end configuration, superior to the other configurations, and can be considered the flagship model of the series. Differences are usually visible in appearance, such as the wheel rims, tires, logos, etc., and it also includes many additional features. Additional information: The standard, low, mid, and high configurations of a car do not differ in basic infrastructure but have some additions in terms of extra equipment: 1. The low configuration is generally a simplified version, lacking features like leather seats, power windows, and many electronic control functions. 2. The standard configuration is the basic equipment, meeting the minimum standards, meaning that all versions of the car, whether low, mid, or high, include these features, such as power windows, power steering, air conditioning, etc. 3. The mid configuration is slightly more advanced than the standard, including all the standard features and possibly additional elements like airbags, sunroofs, leather seats, power seats, seat heating, etc.
10
3
Share

What to Do If the 2-Year New Car Inspection Exemption Expired 3 Months Ago?

For vehicles that have exceeded the annual inspection period by less than one year, there will be no penalties when going to the vehicle management department to complete the inspection procedures. Before the annual inspection, ensure that all traffic violation records are settled, taxes are paid, and bring a copy of the valid compulsory insurance policy to proceed with the inspection. Below is an introduction to vehicle annual inspections: 1. Introduction One: Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate. It is equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." 2. Introduction Two: Vehicle annual inspections can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents.
12
4
Share

What is the fuel tank capacity of the 2007 Besturn B70 in liters?

The fuel tank capacity of the 2007 Besturn B70 is 64 liters. The Besturn B70 comes in a total of 7 models, including both National III and National IV emission standards. The 2007 Besturn B70 is positioned as a mid-size sedan, with dimensions of 4705mm in length, 1782mm in width, and 1465mm in height, and a wheelbase of 2675mm. The Besturn B70 offers two powertrain options: 1. A 2.0L inline 4-cylinder naturally aspirated engine paired with a 6-speed manual or 5-speed automatic transmission, delivering a maximum power of 108KW; 2. A 2.3L inline 4-cylinder naturally aspirated engine paired with a 5-speed automatic transmission, delivering a maximum power of 120KW. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety level, and there is additional space from the safety level to the tank opening. This space ensures that the fuel inside the tank can expand when temperatures rise without overflowing, maintaining a safe margin. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated fuel tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E and F. When the needle is close to E, it indicates low fuel, while nearing F means the tank is nearly full.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.