···
Log in / Register

Which lane should motorcycles take on the highway?

3 Answers
SanDallas
07/29/25 6:11pm
Motorcycles on the highway should take the far-right lane. Highway speed limits: Highways should indicate speed limits for each lane. The maximum speed must not exceed 120 km/h, and the minimum speed must not be lower than 60 km/h. On highways, the maximum speed for small passenger vehicles must not exceed 120 km/h, while other motor vehicles must not exceed 100 km/h, and motorcycles must not exceed 80 km/h. Highway precautions: When entering the highway from an on-ramp, motor vehicles should turn on the left turn signal and merge into the lane without obstructing the normal flow of traffic already on the highway. When exiting the highway, motor vehicles should turn on the right turn signal, enter the deceleration lane, reduce speed, and then exit.
Was this review help?
2
0
Share
McAutumn
08/14/25 10:34am
When riding a motorcycle on the highway, I always choose the far-right lane for safety reasons. The traffic there is lighter, and speeds are relatively slower, reducing the risk of high-speed collisions. For overtaking, I only briefly use the left lane and immediately return to the right lane afterward. Avoid staying in the middle or left lanes for too long, as they pose risks like blind spots from cars and wind resistance. Maintain a speed between 60 to 80 km/h, avoid sudden acceleration, wear a helmet, and keep a safe distance from vehicles ahead and behind. In windy or rainy conditions, staying close to the right-side barrier helps minimize sway and reduces accidents. These practices come from years of riding experience and ensure a safe journey. Regularly checking tires and brakes is also crucial—preventing accidents is always wise.
Was this review help?
7
2
Share
Expand All
DiKate
10/14/25 4:37am
According to traffic regulations, motorcycles must use the far-right lane when traveling at high speeds to maintain overall road order and safety. I have consulted with traffic police and understand that Chinese law explicitly requires this, such as speed limits and lane settings. Staying in the right lane reduces the frequency of lane changes and avoids fines or penalty points. Overtaking should only be done when necessary by quickly moving to the left and immediately returning to the original position afterward. Otherwise, it can easily disrupt other vehicles and trigger chain-reaction accidents. Complying with the law is not only legal but also protects oneself, especially given the low visibility of motorcycles. It is advisable to familiarize oneself with road signs and maintain a steady speed in coordination with traffic flow. Other safety measures, such as wearing reflective clothing, can increase visibility during nighttime riding.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

What is the difference between 20t and 2.0t?

The difference between 20t and 2.0t lies in the displacement, as well as the turbo size and turbo pressure. Turbocharging Technology: Turbocharging technology was initially applied to aircraft engines to address the issue of insufficient air intake at high altitudes. Later, this technology was adapted for use in diesel engines. Maintenance and Upkeep: The 20t engine is more fuel-efficient than the 2.0t engine, and its maintenance costs are also slightly lower. When choosing a turbocharged engine model, it's important to select an appropriate displacement rather than pursuing excessively large displacements.
1
3
Share

What is the lifespan of halogen headlights?

The lifespan of halogen headlights is generally around 2,500 hours. Here is some relevant information about halogen headlights: 1. Definition: Halogen bulbs, also known as halogen lamps or tungsten halogen bulbs, quartz bulbs, are a variant of incandescent lamps. Halogen lights generally have lower brightness; for example, a 55W halogen bulb typically produces just over 1,000 lumens. 2. Working Principle: They operate based on the principle of thermal radiation and incandescence—simply put, when sufficient current passes through the filament, it heats up to incandescence and emits light. However, the lifespan of such incandescent lamps is relatively very short.
18
5
Share

Where is the Bluetooth connection for the Audi Q2L?

Audi Q2L's Bluetooth connection is located in the settings menu of the central control screen. Below is a related introduction to the Audi Q2L: 1. Body dimensions: The Audi Q2L is a compact SUV, with a length, width, and height of 4237mm, 1785mm, and 1548mm respectively, and a wheelbase of 2628mm. 2. Power: The Audi Q2L has a total motor power of 100KW and a total torque of 290 Nm. 3. Suspension: The front suspension of the Audi Q2L pure electric version uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
3
0
Share

Can a gas cylinder be placed inside a car?

Gas cylinders should not be placed inside a car. Hazards of placing gas cylinders in a car: During driving, the car may experience bumps. If the cylinder itself has quality issues, such as thin walls, it can easily be damaged during transportation, and impacts may cause explosions. Precautions for gas cylinders: According to regulations, any vehicle transporting hazardous materials must have a transportation permit issued by the heavy chemical department. Drivers must also undergo training and obtain certification, and there must be a certified escort during transportation. However, some operators have weak safety awareness and prioritize profit, reflecting poor management at liquefied petroleum gas filling stations.
8
0
Share

How to Register a Used Car?

The method to register a used car is for the owner to prepare the relevant materials, go to the transfer hall to explain the situation and submit the documents. After the vehicle passes the inspection, a temporary license plate will be issued. Then, drive the car to the seller's location and use the file to complete the transfer procedures at the relevant unit. Below is an introduction to the documents required for the transfer of a used car: 1. Seller's ID: Original and photocopy of the seller's personal ID card. 2. Buyer's ID: Original and photocopy of the buyer's personal ID card. 3. Vehicle documents: Original and photocopy of the motor vehicle registration certificate of the car being transferred. 4. Driving documents: Original and photocopy of the vehicle's driving license.
16
5
Share

Will Not Wearing a Seatbelt Be Captured by Cameras?

Not wearing a seatbelt will be captured by cameras. The protective functions of seatbelts: Prevent drivers and passengers from being thrown out of the vehicle; counteract the deceleration during a collision, ensuring that drivers and passengers do not experience a secondary impact with objects such as the steering wheel, dashboard, or windshield. Precautions for correctly wearing a seatbelt: The lap belt should be fastened snugly across the hips, just below the pelvic bones, in contact with the femur. During a collision, the force is distributed to the pelvic bones, avoiding severe injuries caused by the belt tightening around the abdomen. The shoulder belt should cross over the shoulder and chest. These areas of the human body can effectively withstand the restraining force of the seatbelt.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.