Which Lane is the Fast Lane?

1 Answers
LeConnor
07/30/25 8:23am
Fast lane is the leftmost lane. Generally, the leftmost lane on China's highways or urban roads is the fast lane. On roads with two or more motor vehicle lanes in the same direction, the left lane is the fast lane, while the right lane is the slow lane. On roads with three motor vehicle lanes in the same direction and no other markings, the leftmost lane is the fast lane. The relevant details about the fast lane are as follows: Introduction 1: When there are two or more motor vehicle lanes in the same direction, the left lane is the fast lane, and the right lane is the slow lane. Introduction 2: Vehicles driving in the fast lane should maintain the speed specified for that lane. Vehicles that cannot reach the specified speed should use the slow lane. Introduction 3: Vehicles in the slow lane can temporarily use the fast lane to overtake the vehicle in front.
Was this review help?
17
3
Share
More Forum Discussions

Is It a Good Omen for a New Car to Have Minor Scratches and Dents?

Minor scratches and dents on a new car are not a good omen. Here are some precautions for using a new car: 1. Preheating the cold engine: Proper preheating helps form an "oil film" between engine components, thereby reducing wear and tear. 2. Timely gear shifting while driving: When driving a manual transmission car during the break-in period, shift gears promptly and appropriately to avoid incorrect behaviors such as high gear with low RPM or low gear with high RPM. Also, avoid using a single gear for an extended period. 3. Timely maintenance: Simply follow the manufacturer's recommendations in the vehicle manual. After reaching a certain mileage or time, promptly conduct vehicle inspections and maintenance, including oil and oil filter changes, along with a comprehensive check of the chassis system. 4. Avoid emergency braking: Emergency braking not only shocks the braking system during the break-in period but also increases the impact load on the vehicle's chassis and engine.
9
3
Share

Can Subject 2 and Subject 3 be Applied for Simultaneously?

In a few regions, it is possible. The content and passing standards for the driver's license examination subjects are uniformly set nationwide, and the examination sequence follows Subject 1, Subject 2, Subject 3, and Subject 4 in order. Only after passing the previous subject can one proceed to the next. Currently, only a few regions allow Subject 2 and Subject 3 to be taken simultaneously, but in most areas, passing the previous subject is still required. Below are the relevant introductions to Subject 2 and Subject 3: Subject 2 and Subject 3 can be taken together. The new "Outline" states that each province should set relevant requirements for the training mileage of each permitted vehicle type based on actual conditions, but the minimum should not be less than 300 kilometers. The "hours" referred to in the new "Outline" are the basic hour requirements for each vehicle type. If additional examination content and items are needed, corresponding hours must be added. The new regulations also stipulate that "safe and civilized driving knowledge" teaching should be integrated with "road driving" teaching; "basic and field driving" and "road driving" can be trained alternately. This means that students can combine theoretical learning with actual hands-on practice, integrating Subject 2 and Subject 3. This approach not only saves time but also reduces the cost of the driving test.
6
1
Share

Do Automatic Transmission Cars Have a Clutch Pedal?

Automatic transmission cars do not have a clutch pedal. The clutch in an automatic transmission car is integrated into the gearbox to achieve automatic shifting. Related details are as follows: Pedals in an automatic transmission car: An automatic transmission car has two pedals: one is the accelerator pedal, and the other is the brake pedal, which are the gas and brake, respectively. Driving method for an automatic transmission car: Sit in the driver's seat, adjust the seat properly, press the brake pedal, and start the vehicle with the key. Once the vehicle is started, gently press the accelerator pedal twice to allow the vehicle to cycle through its systems. Then, press the brake pedal again and shift the gear to the 'R' position. After that, adjust the rearview camera to prevent the vehicle from hitting objects behind. Next, release the handbrake, hold the steering wheel firmly, and slowly lift the brake pedal to start moving. When the vehicle needs to go uphill, shift the gear to 'L' to increase the vehicle's power. Then, hold the steering wheel firmly and lightly press the accelerator pedal to accelerate the vehicle.
11
2
Share

How to choose between V-KOOL K35 and K15?

The difference between V-KOOL K35 and K15 lies in the shade of color. If you prefer a darker tint, you can choose K15; if you prefer a lighter tint, you can choose K35. Here is some information about V-KOOL: 1. V-KOOL Brand Story: In the 1970s, to alleviate the global oil crisis, engineers at the Massachusetts Institute of Technology developed a revolutionary technology that resolved the conflict between light and heat, marking the beginning of the V-KOOL story. With the dedication of a group of visionary, passionate, and exceptionally talented scientists, the first V-KOOL product, VK70, was officially launched in 1993, transforming the industry landscape and remaining unparalleled to this day. 2. Brand Introduction: Eastman Chemical is a globally leading specialty chemicals company and a top manufacturer of window films. Its products are widely used in various aspects of daily life. Headquartered in Kingsport, Tennessee, USA, it is a New York Stock Exchange-listed company and ranks among the Fortune 500. With approximately 13,500 employees and 42 manufacturing bases worldwide, its business spans nearly 100 countries. Committed to environmental protection, social responsibility, and economic development, it won the 2012 ENERGY STAR Award from the U.S. Environmental Protection Agency.
7
2
Share

Do Automatic Cars Require Clutch Pedal Engagement?

Automatic transmission vehicles do not require clutch pedal engagement. There is no clutch pedal in automatic cars, as gear shifts are entirely controlled by the onboard computer. An automatic transmission eliminates the need for manual gear shifting by the driver. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions, replacing human judgment in shift timing and operation. Typical automatic transmissions feature P, R, N, D, 3, 2, and 1 gear positions: P stands for Parking, R for Reverse, N for Neutral, and D for Drive. Driving procedure for automatic vehicles: Sit in the driver's seat and adjust the seating position. Depress the brake pedal and start the vehicle using the ignition key. After startup, gently press the accelerator pedal twice to allow the vehicle systems to complete their self-check cycle. Maintain brake pedal pressure, then shift the gear selector to R position. Adjust the rearview camera to prevent collisions with rear obstacles. Release the parking brake, grip the steering wheel firmly, and gradually release the brake pedal to initiate movement. When encountering steep inclines, shift to L position (Low gear) to enhance powertrain performance. Subsequently, control the steering wheel and apply gentle pressure to the accelerator pedal to achieve acceleration.
13
5
Share

What is the parking sequence for an automatic transmission car?

Automatic transmission car parking sequence is to step on the brake, shift gears, and pull the handbrake. Below are the detailed parking sequences for automatic transmission cars and the parking methods for keyless series automatic transmission cars: Detailed parking sequence for automatic transmission cars: First, step on the foot brake to stop the car, then shift the gear from D to N, and pull the handbrake tight. Release the foot brake, but do not turn off the power, then step on the foot brake again, shift the gear from N to P, release the foot brake, and turn off the power. Parking method for key series automatic transmission cars: First, step on the foot brake to stop the car, shift the gear from D to N. Then pull the handbrake tight and turn off the engine. Release the foot brake, but do not turn off the power, step on the foot brake again, shift the gear from N to P, release the foot brake, turn the key back, turn off the power, and pull out the key. Parking method for keyless series automatic transmission cars: Without stepping on the foot brake, press the start button twice to let the car's computer system begin self-checking for at least 6 seconds. Step on the foot brake and press the start-stop button to ignite.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.