Which is the top-of-the-line model of the Touareg?

1 Answers
OCalvin
07/29/25 3:35pm
The top-of-the-line model of the Touareg is the 3.0TSI R-Line. Taking the 2019 Touareg 3.0TSI R-Line as an example, it is a mid-to-large SUV with body dimensions of 4878mm in length, 1984mm in width, and 1686mm in height, a wheelbase of 2899mm, and a fuel tank capacity of 90 liters. The 2019 Touareg 3.0TSI R-Line is equipped with an 8-speed automatic transmission, producing a maximum horsepower of 340ps and a maximum power of 250kw. It features a front-engine four-wheel-drive layout, with multi-link independent suspension on both the front and rear, and tire specifications of 285/40R21.
Was this review help?
4
3
Share
More Forum Discussions

What does it mean when a car's VSC system needs to be checked?

The VSC in a car stands for Vehicle Stability Control, which translates to Vehicle Stability Control System in Chinese. It is an active safety system developed by Toyota Motor Corporation. A dashboard prompt to check the VSC system indicates a malfunction in the vehicle stability control system. The VSC system has three main features: 1. Real-time monitoring: The VSC system can monitor the driver's control actions (steering, braking, throttle, etc.), road conditions, and the vehicle's motion status in real time, and continuously sends commands to the engine and braking system. 2. Active intervention: Safety technologies like ABS mainly intervene in the driver's actions but cannot regulate the engine. The VSC system, however, can actively adjust the engine throttle to regulate engine speed and modify the driving and braking forces on each wheel to correct oversteer and understeer. 3. Pre-alert: When the driver operates improperly or encounters abnormal road conditions, the VSC system will alert the driver with a warning light.
12
0
Share

Why should low beam headlights be used when driving straight through an intersection at night?

When passing through an intersection with traffic lights at night, low beam headlights should be used. If the intersection does not have traffic lights, the headlights should be alternately switched between high and low beams as you approach the intersection to alert vehicles and pedestrians in the perpendicular direction. Additionally, the vehicle speed should be reduced when nearing the intersection to prevent sudden situations and allow sufficient time to react. Extended information: Use of lights at night: 1. When driving on well-lit roads, low beam headlights should be used; following another vehicle also requires the use of low beam headlights to facilitate the vehicle ahead in observing the situation behind through the rearview mirror. When meeting an oncoming vehicle at a distance of 150 meters, the high beam headlights should also be switched to low beam. 2. When driving at night through slopes, arched bridges, pedestrian crossings, sharp curves, slopes, or when overtaking vehicles ahead, the headlights should be alternately switched between high and low beams to alert other vehicles that your vehicle is preparing to pass through the road.
14
3
Share

What to Do with 86 Points of Traffic Violations on a Vehicle?

It can only be handled through normal procedures. Bring the vehicle registration certificate, driver's license, and the owner's ID card to the local vehicle management office for processing. Only 12 points of traffic violations can be handled at a time, and the remaining violations require payment of fines, with the driver's license being confiscated. Additional Information: 1. Handling of Motor Vehicle Violations: Traffic violations can be processed through the "Traffic Management 12123" mobile app or at the local vehicle management office or traffic management department of the public security authority. The process requires the presence of the driver with the vehicle registration certificate, driver's license, and ID card. It is not allowed to handle traffic violations on behalf of other vehicles. 2. Consequences of Not Handling Vehicle Violations: Failure to handle vehicle violations will result in the inability to complete the annual inspection procedures for the motor vehicle. Vehicles that fail the annual inspection are not allowed on the road and are considered illegal. If the traffic violation ticket is issued on-site by the traffic management department and not handled within the specified time, late fees will be charged when processing.
5
3
Share

What are the reasons for no hot air coming out of the air conditioning heating?

There are several reasons why a car's air conditioning does not produce heat: 1. The vehicle has just started: The engine temperature has not yet risen, and it will work after the car warms up. 2. Insufficient coolant: A lack of coolant can also cause the car's air conditioning not to produce heat, and adding coolant will solve the issue. 3. Damaged water pump: This can lead to a failure in the coolant circulation system, causing the car's air conditioning not to produce heat, and replacing the water pump will fix it. 4. Clogged heater core or radiator: If hot water from the engine cannot circulate into the radiator, the air conditioning will not produce heat, and cleaning the heater core will resolve the problem. 5. Faulty radiator fan: If the radiator fan runs continuously, it will dissipate heat constantly, making it difficult for the coolant inside the radiator to warm up, leading to the air conditioning not producing heat. Inspecting and repairing the radiator fan will solve the issue.
19
2
Share

What is the battery model for a Skoda car key?

The battery model for a Skoda car key is CR2025. CR2025 is a lithium manganese dioxide battery, named according to the IEC standard. The naming convention is as follows: C - Indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R - Indicates that the battery is cylindrical in shape; if it were square, F would be used instead; 20 - Indicates the battery diameter is 20mm; 25 - Represents the battery height is 2.5mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity varies between 140-170mAh. The shelf life of a CR2025 battery is typically 5 years. If the manufacturer's production standards are low or quality control is poor, the lifespan can be significantly shorter. Domestic first-tier brand batteries can generally guarantee this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can be extended further, up to 8 or even 10 years. Generally, replacing a car key battery involves the following three steps: Step 1: Remove the mechanical key. Press the lock button on the side of the smart key to remove the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you will see a deep groove and a shallow groove at the top of the smart key. The deep groove is the keyhole, while the shallow groove is used to open the battery cover. Insert the mechanical key into the shallow groove and pry it open with force to reveal the battery cover. Once opened, you will see the button battery, which can be easily removed with a gentle push. Step 3: Replace the battery. Install the new battery, then reattach the battery cover and mechanical key in sequence to complete the battery replacement.
16
4
Share

What is the function of the Anti-Slip Regulation (ASR)?

The function of the Anti-Slip Regulation (ASR) system is to control the slip within a certain range during vehicle acceleration, preventing the drive wheels from slipping excessively, thereby improving the directional stability and steering control capability of the vehicle during braking. The ASR system enhances traction and maintains the driving stability of the vehicle. On slippery roads, vehicles without ASR are prone to wheel spin during acceleration; rear-wheel-drive vehicles may experience fishtailing, while front-wheel-drive vehicles may lose directional control. With ASR, the vehicle can either prevent or mitigate such phenomena during acceleration. The principle is that when the computer detects a drive wheel slipping, it automatically reduces the engine's power output and applies braking to the slipping wheel until normal wheel rotation is restored. The role of ASR is to control the tire slip rate within a certain range during acceleration, preventing the drive wheels from losing power due to slipping or causing safety issues due to excessive power output. One of its functions is to improve traction, and the other is to maintain stable vehicle operation. On slippery roads, vehicles without ASR are prone to wheel spin during acceleration; rear-wheel-drive vehicles may fishtail, while front-wheel-drive vehicles may lose directional control. With ASR, the vehicle can either prevent or mitigate such phenomena during acceleration.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.