Which is the cheapest among BBA for post-warranty repairs?

Can you shift directly from D to M gear while driving?

You can shift directly from D to M gear. The D gear can be directly switched to M gear, S gear, or higher restriction gears (3rd gear and above). However, the vehicle must come to a complete stop with the brake pedal depressed before shifting from D gear to P or R gear. Shifting to P gear should be done in one smooth motion without stopping at R gear, though you may pause at N gear. When shifting to R gear, pause briefly at N gear to reduce the impact of reverse oil flow in the transmission. The D gear can be moved directly to neutral (N gear), but generally, shifting from D to N gear should only be done at low speeds or when stopped. Shifting from D to N gear at medium or high speeds for extended periods may damage the transmission. Below are relevant details: Shifting from P to D gear: Firmly depress the brake pedal, then quickly move the gear lever to D gear in one motion without pausing at R or N gear to minimize vibration during gear changes. Shifting from R to D gear: Also firmly depress the brake pedal, but pause briefly at N gear before moving to D gear to reduce the impact of reverse oil flow inside the transmission. N gear can be directly shifted to D gear, but this still causes some impact on the transmission. Unless in an emergency, always depress the brake before shifting gears.

20

4

Share

How to Choose Between Yidong and Ruicheng CC?

Ruicheng CC features a turbocharged engine; Yidong Plus comes with a naturally aspirated engine. Ruicheng CC is equipped with a 7-speed dual-clutch transmission; Yidong Plus has a 5-speed manual transmission. Ruicheng CC adopts a multi-link independent suspension; Yidong Plus uses a torsion beam non-independent suspension.

9

4

Share

Do new cars require annual inspection?

No. New cars are exempt from inspection for the first 6 years, but you need to visit the vehicle management office every 2 years to apply for stickers and labels. The normal annual inspection process involves going to a testing station for vehicle checks (lights, tires, emissions, etc.), and then obtaining the inspection label after the vehicle passes. However, new cars benefit from the "6-year exemption" policy, which essentially means you can skip the vehicle inspection part and directly apply for the inspection label. Here are some relevant details: Tractors and other motor vehicles must be inspected once a year. Commercial vehicles that pass the safety technical inspection within the specified period do not need to repeat the inspection. Vehicles that exceed the scrapping age cannot be transferred (sold or bought), but can still be used. For transactions, you can first go to the vehicle management office to obtain a scrapping certificate (to deregister the vehicle's records) and then proceed with the transaction. Inspection notes: For non-commercial small and mini passenger cars (excluding vans) over 6 years but under 10 years old, the inspection cycle is relaxed from once a year to once every two years. This means private cars only need to undergo on-site inspection twice within 10 years, specifically in the 6th and 8th years. After 15 years, the rules remain unchanged, requiring inspection every six months.

11

5

Share

What engine is used in the SWM X7?

SWM X7 is equipped with a 1.5T turbocharged engine, which has a maximum power of 156 kW and a maximum torque of 230 Nm. The transmission is matched with a 5-speed manual gearbox, and it adopts a front-engine, front-wheel-drive layout. The car engine is the power-generating device of the vehicle, serving as the heart of the car, determining its power performance, fuel economy, and environmental friendliness. The SWM X7 is positioned as a mid-size SUV, with a body length of 4710 mm, width of 1855 mm, height of 1770 mm, and a wheelbase of 2750 mm. The SWM X7 features a front MacPherson strut and rear torsion beam suspension structure.

7

1

Share

Where is the daytime running light switch for the 2021 CR-V?

Daytime running lights generally do not have an independent switch. They usually turn on when the ignition key is activated and turn off when the handbrake is engaged. Some vehicles may have an option to disable them in the onboard computer menu. If they light up after starting the engine, it is likely due to an aftermarket installation, as the daytime running light controller includes voltage detection.

5

Share

What is the method for checking the mirror base when reversing into a parking space?

Due to differences in height, the rearview mirror needs to be adjusted in a timely manner to avoid obstructed vision when looking directly backward. When reversing, in addition to checking the indoor rearview mirror, it's also important to observe both sides carefully to prevent the vehicle from hitting other cars or obstacles on either side.

16

5

Share

Which is the cheapest among BBA for post-warranty repairs?

Can you shift directly from D to M gear while driving?

How to Choose Between Yidong and Ruicheng CC?

Do new cars require annual inspection?

What engine is used in the SWM X7?

Where is the daytime running light switch for the 2021 CR-V?

What is the method for checking the mirror base when reversing into a parking space?

Where can I get my car's headliner replaced?

Why can't the rear window glass be raised or lowered?

How Long Does It Take to Check for Traffic Violations?

Should a broken car headlight claw be replaced or welded?