Which is on and which is off, 'on' or 'off'?

Encountering Water Accumulation: Should a Car Pass Through Quickly or Slowly?

When encountering water accumulation, a car should pass through slowly, and neither accelerate nor decelerate on water-covered roads. Do not rashly drive through accumulated water. When a car is in water, due to the buoyancy of water and the impact of water flow, the adhesion of the wheels decreases, and the stability of the vehicle worsens, making it prone to skidding and side slipping. If the water is deep, electrical equipment is susceptible to short circuits, and the engine is prone to water ingress. Below are precautions for driving in rainy weather: Reduce speed and drive slowly: Regardless of the width of the road or the condition of the surface, drive at a reduced speed in the rain, always paying attention to the distance from vehicles in front and behind, and be mentally prepared to take various emergency measures. Visibility is low in rainy weather, and vision is poor. The emergency performance of the vehicle, such as braking distance, is also reduced, so slow down in advance, leaving sufficient time and space to handle situations, ensuring safety. Maintain distance: When driving in the rain, visibility is obstructed, so pay attention to maintaining distance between vehicles, constantly observe the distance from vehicles in front and behind, and increase the safe distance. Especially stay away from large vehicles: first, they can block your view; second, the water depth that large vehicles can pass through may not be passable for small cars, and large vehicles are prone to splashing water waves, interfering with the driving of small cars. Turn on fog lights when driving in the rain: Make full use of fog lights to enhance driving safety in rainy weather. If necessary, turn on hazard warning lights so that vehicles behind can always be aware of the movements ahead. Do not restart after stalling: In heavy rain or stormy weather, some road sections may accumulate serious water in a very short time. If you must drive through water, use a low gear to pass through at a steady speed. If the vehicle stalls while moving, never attempt to restart it. Blindly restarting may cause the engine to be scrapped. After the vehicle stalls, contact a specialized repair shop promptly. Only after the maintenance personnel have inspected the vehicle on-site and confirmed there are no issues should the vehicle be restarted.

3

2

Share

Is it okay to be photographed for speeding violations?

It is okay to be photographed for speeding violations. The speed cameras are only auxiliary to the speed radar. When the speed radar detects speeding, the camera will take a photo. Therefore, the speed cameras are only responsible for photographing speeding vehicles. Generally, there are relatively few speed detection probes. Below are precautions for driving on highways: 1. Drive in the designated lane: Highways have clearly marked lanes, including dedicated lanes for large vehicles, small vehicles, etc. When overtaking, once you occupy a lane, return to your appropriate lane promptly after completing the overtaking. Do not occupy other lanes for extended periods. Additionally, emergency lanes should not be occupied for non-emergency reasons. 2. Maintain a safe speed and avoid speeding: The dangers of speeding are well-known, whether on local roads or highways, as it can lead to irreversible consequences. 3. Maintain a safe following distance: Under normal conditions, on dry roads with good braking, the following distance (in meters) should not be less than the speed (in km/h). For example, at 80 km/h, the distance should be no less than 80 meters; at 100 km/h, no less than 100 meters. Always pay attention to roadside distance markers. In rainy, foggy, snowy, or wet road conditions, the following distance should be doubled. 4. Observe traffic signs: Always pay attention to roadside and overhead signs and markings while driving. Stay appropriately to the right to avoid running over the right lane divider, giving overtaking vehicles sufficient lateral space. 5. Do not arbitrarily occupy emergency lanes in case of accidents: Traffic accidents are inevitable on highways. If other vehicles cause an accident and block the roadway, do not occupy the emergency lane, as this may prevent rescue vehicles from reaching the scene. 6. Avoid fatigue driving and take timely breaks: Fatigue driving is extremely dangerous on highways. When fatigued, reaction times slow down, making it difficult to respond correctly to sudden situations.

17

4

Share

How to Reset the Tire Pressure Warning on Geely Borui?

Geely Borui tire pressure warning reset method: 1. Press the vehicle's one-button start to power on the vehicle, otherwise the tire pressure cannot be reset; 2. Press the MODE button on the right side of the multifunction steering wheel; 3. The central dashboard will display the vehicle's tire pressure information; 4. Press the cancel button on the left side of the multifunction steering wheel to remove the tire pressure display, and you will see that the tire pressure warning has been reset. The Geely Borui is a model under Geely, with body dimensions of 4956mm in length, 1861mm in width, and 1513mm in height, and a wheelbase of 2850mm. In terms of appearance, the Borui has undergone optimized designs on multiple parts including the grille, front and rear bumpers, making the overall shape more dynamic and stylish. The optimized water ripple front grille is more square and tensioned, the lower grille design has been updated from a ribbon style to a blade style, and a horizontal chrome trim has been added, enhancing the front face's layering and three-dimensional sense.

6

0

Share

Why Are Most Cars Now Equipped with Automatic Transmissions?

The reason most cars now come with automatic transmissions is that they are easier to operate, feature safety modes, and provide greater convenience and comfort. The gear positions include: 1. P (Parking/Starting Gear); 2. R (Reverse Gear); 3. N (Neutral Gear); 4. D (Drive Gear); 5. L (Low Gear); 6. S (Sport Mode); 7. OD (Overdrive Gear). The correct way to use an automatic transmission is: 1. The vehicle can only be started in P or N gear. To shift out of P gear, the brake must be pressed. Turn on the power, press the brake, shift to N gear, and after ignition, shift to D gear to move forward. 2. When switching between N, D, and 3rd gear, no shift button is needed. However, shifting down from 3rd gear to lower gears requires pressing the shift button, while shifting up from lower gears does not. 3. Do not shift into N gear while driving to coast. 4. Never push into P gear while driving. 5. After driving, the engine must be turned off and shifted into P gear before the key can be removed.

14

1

Share

What are the dimensions of the Cruze?

The dimensions of the Cruze are 4666mm in length, 1807mm in width, and 1460mm in height, with a wheelbase of 2700mm. Below is an introduction to the Cruze vehicle: Cruze's development goal: The Chevrolet Cruze is a compact sedan under the Chevrolet brand. It is a new-generation model developed by General Motors with the goal of creating a benchmark in design and performance for compact cars, integrating global resources. The most noticeable change in the appearance of the Chevrolet Cruze is the modification of the rear emblem, where 330T and 320 are used to distinguish models equipped with the 1.4T turbocharged engine and the 1.5L engine, respectively. This makes the Cruze the second Chevrolet model after the Equinox to adopt a three-digit number and letter naming convention for its rear emblem. Design philosophy: The Cruze adopts the design philosophy of the Malibu, featuring a completely new design for the car's styling, which aligns well with the aesthetic preferences of modern young consumers. It is worth mentioning that, as a compact sedan, this car boasts a wheelbase of 2700mm, giving it an absolute advantage in space compared to other models in the same class.

10

5

Share

What are the consequences of mixing power steering fluids?

Mixing power steering fluids can accelerate oil degradation and increase mechanical wear, potentially leading to mechanical failures. Power steering fluid is a special liquid used in the vehicle's power steering pump, which utilizes hydraulic pressure to make steering significantly lighter. To prevent contamination or deterioration of the power steering fluid, it is recommended to replace it every 2 years or 30,000 kilometers. Power steering automatically provides additional steering force when the driver turns the wheel, thereby reducing the driver's steering effort. Power steering oil is a medium oil added to the power steering system, serving to transmit steering force and provide cushioning.

6

3

Share

Which is on and which is off, 'on' or 'off'?

Encountering Water Accumulation: Should a Car Pass Through Quickly or Slowly?

Is it okay to be photographed for speeding violations?

How to Reset the Tire Pressure Warning on Geely Borui?

Why Are Most Cars Now Equipped with Automatic Transmissions?

What are the dimensions of the Cruze?

What are the consequences of mixing power steering fluids?

What does BMW 5 Series mean?

Which countries have cars with the steering wheel on the right?

How to Pair a Car Remote?

Can a Standard Car Fit in a Mini Parking Space?