Which is on and which is off, 'off' or 'on'?

2 Answers
LeRichard
09/03/25 7:54am
on is on, off is off. These two letters usually appear on the car's start button or on the car's air conditioning panel. Adjusting to the on position means turning on a certain function, and adjusting to the off position means turning off the function. By using the car's air conditioning system, the driver's fatigue can be reduced, and potential driving hazards can be minimized. The air conditioning system draws in fresh air from outside, providing ventilation and air filtration functions. The air conditioning system is a sign of a car's complete functionality, as it can control the temperature inside the car, maintain a comfortable level, and promptly remove moisture from the air, creating a more comfortable environment. Air conditioning has become a standard feature in all types of vehicles, serving as a benchmark for whether a car is fully equipped.
Was this review help?
17
0
Share
VonCaleb
09/16/25 2:28am
I remember when I first learned to drive, I also got confused—off means turn off, while on means turn on. For example, with the car's headlight switch, flipping it to the 'on' position turns the lights on, and switching it to 'off' turns them off. This rule applies to almost all electrical appliances, including air conditioners—press 'on' to turn them on and 'off' to turn them off. Safe driving is crucial, so don’t mix them up. For instance, if you forget to turn the headlights 'off' when parking at night, the battery could drain. Practice a few times, and you’ll remember: 'on' feels like the energy of starting the engine, while 'off' is like the moment of parking and relaxing. In car maintenance, promptly turning 'off' unnecessary equipment can save fuel and extend the lifespan of components.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What type of fuel should be used for motorcycles with a compression ratio greater than 11?

You can use 97-octane gasoline. Engine compression ratio: Generally speaking, the higher the compression ratio of an engine, the smaller the volume of the combustible mixture being compressed, resulting in greater power and lower fuel consumption. However, the engine's compression ratio must be matched with another indicator, which is the gasoline's anti-knock index, also known as the octane number, or the gasoline grade. Types of fuel: Currently, the fuel market abroad offers gasoline in three grades: 93, 95, and 98. Engine compression ratios are also designed with reference to these three grades, so there are not many engines that are compatible with 90-octane gasoline.
19
3
Share

Why don't rally motorcycles use four-cylinder engines?

Rally motorcycles focus on low-end torque, and the power delivery of twin-cylinder and single-cylinder engines is more suitable for rally bikes. Reasons: Rally motorcycles emphasize low-end torque, and the power characteristics of twin-cylinder and single-cylinder engines are better suited for rally applications. Four-cylinder engines prioritize high-RPM performance and elasticity, which results in relatively weaker low-end torque, making them more suitable for sport bikes. Additional Information: The differences between rally motorcycles and touring motorcycles include: Comfort - Touring bikes are specifically designed for long-distance travel and offer greater comfort; Speed - Rally bikes focus on competition, with riding positions and power delivery designed for racing, such as reduced wind resistance, extreme acceleration, and higher off-road capability; Fuel Efficiency - Touring motorcycles generally have lower fuel consumption and are more economical.
13
2
Share

What are the symptoms of a bad throttle body?

The symptoms of a bad throttle body include: 1. Unstable engine idle speed, with high idle speed persisting without dropping; 2. Difficulty in starting the engine; 3. Insufficient engine power, poor acceleration performance, and unstable operation; 4. Black smoke from the car's exhaust pipe; 5. The engine fault light is on. The car's throttle body is a controllable valve that regulates the air entering the engine. After the air enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to generate power. The method for cleaning the throttle body is: 1. Turn off the ignition switch and disconnect the negative terminal of the battery; 2. Remove the throttle cable, intake hose, and screws fixing the throttle body in sequence; 3. Use a cleaning agent to clean the throttle body, and wipe hard-to-reach areas with a cotton thread.
10
1
Share

Why does the new electric vehicle have a short driving range?

Electric vehicles, the short driving range is directly related to the battery capacity. Concept of battery aging: If it is an old battery, it may be due to battery aging. Aging is often associated with failure, but strictly speaking, aging and failure are two different concepts. Aging refers to the deterioration of power battery performance parameters over time. Issues that may arise: If a new battery is installed, issues such as motor demagnetization, coil short circuits, which increase power consumption, or poor connections in the wiring can affect the range and need to be checked. It could also be a problem with the controller or the rear hub. Determining whether the controller is malfunctioning is relatively simple, mainly observed from the riding condition, which includes: The electric vehicle moves at a slower speed, accelerates sluggishly, and there is a noticeable lack of power.
17
0
Share

How many volts does a motorcycle battery have?

Generally, each set of a motorcycle battery is 12V, and four sets in series make 48V. Working Principle: A battery is a type of cell, also known as an accumulator. Its working principle involves converting chemical energy into electrical energy. The commonly referred to battery is the lead-acid battery, which mainly uses lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte. Main Uses: Starting batteries are mainly used for starting and lighting in automobiles, motorcycles, tractors, diesel engines, etc.; Stationary batteries are primarily used in communications, power plants, and computer systems as backup power for protection and automatic control; Traction batteries are mainly used as power sources for various battery-powered vehicles, forklifts, and loaders; Railway batteries are mainly used for starting and lighting power in railway diesel locomotives, electric locomotives, and passenger cars; Energy storage batteries are mainly used for storing electrical energy generated by wind, solar, and other renewable sources.
11
2
Share

Is it possible to skip gears when shifting?

Manual transmission vehicles cannot skip gears when upshifting, but they can skip gears when downshifting. When shifting gears in a manual transmission, the following points should be noted: Accurately gauge the vehicle's speed and engine RPM when accelerating and shifting. If you shift gears at a lower speed, the engine may not provide sufficient power, which could result in noticeable body vibration, prolonged shifting time, or even stalling. The shifting sequence for manual transmissions: Release the accelerator pedal with your right foot, depress the clutch pedal with your left foot, and move the gear lever back to the neutral position; then manipulate the gear lever to shift to the desired new gear; finally, release the clutch pedal while pressing the accelerator pedal to complete the shifting operation.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.