Which is on and which is off between 'off' and 'on'?

1 Answers
VanBrianna
07/29/25 4:39pm
on means on, and off means off. There are many buttons in the car, and these buttons usually have some icons and English letters, which indicate the function of the switch. It is normal for many car owners not to understand these icons or letters. If you are not familiar with the functions of the buttons in the car, you can refer to the vehicle manual, which provides detailed explanations of the functions of each button. Regarding the English letters on the car: Many car owners wonder why domestic cars have English letters on the buttons instead of Chinese. If Chinese were to be written, the buttons would have to be very large, so many domestic cars also have English letters on the buttons. Reading the manual: After buying a new car, it is recommended that car owners carefully read the vehicle manual to gain a detailed understanding of the vehicle's functions. If you encounter problems during maintenance and repair, you can read the maintenance manual, which can help solve some problems. It is recommended to keep the maintenance manual and the user manual in the glove compartment of the passenger seat so that you can refer to them whenever you have questions. There are some switches in the car that should not be pressed casually, such as the esp-off button. Regarding the esp-off button: This button is used to turn off the vehicle stability system, and it is very dangerous to turn off this system while driving on public roads. On underground race tracks or in professional venues, you can turn off the esp. The esp system has an indicator light on the dashboard, and if this light stays on for a long time, it means there is a fault in the esp system.
Was this review help?
14
3
Share
More Forum Discussions

What is the difference between Mercedes-Benz and Beijing Benz?

There are several differences between Mercedes-Benz and Beijing Benz: 1. Different production locations: The original production location of Mercedes-Benz is in Germany, but a few models are produced in the United States, Australia, or Africa, etc.; Beijing Benz is produced in Beijing, and there are only 5 models. 2. Different interiors: Mercedes-Benz uses imported materials; Beijing Benz uses practical and simple materials. 3. Different technologies: Mercedes-Benz is a German luxury brand, and its success today is due to its rigorous technology. Even if it is not produced locally, quality must be a prerequisite; Beijing Benz maintains consistency with the German main factory in terms of the engine and main components, while the rest of the parts are produced by domestic OEMs.
10
2
Share

How often should the transmission fluid be changed?

Transmission fluid should be changed every 3 to 4 years. The steps for changing transmission fluid are: 1. Remove the drain plug at the bottom of the transmission to drain the old fluid; 2. Remove the inner and outer transmission housing; 3. Remove the transmission fluid filter; 4. Take off the oil pan gasket and clean surrounding stains; 5. Wipe the cleaned transmission fluid filter with cotton thread; 6. Add new fluid after reassembly. The transmission consists of gear transmission mechanisms and gear shifting mechanisms, and its functions are: 1. Maintaining the cleanliness of the gear system; 2. Lubricating and extending the service life of transmission components; 3. Cooling and sealing.
2
0
Share

What are the methods to remove odors from a new car?

Methods to remove odors from a new car include: 1. Open the car doors for ventilation before driving; 2. Place activated charcoal bags to absorb odors; 3. Place fresh lemons, grapefruit peels, or pineapples inside the car to release fragrance and mask odors; 4. Place a small bowl with a mixture of vinegar and water in an inconspicuous spot inside the car—vinegar can stabilize formaldehyde, while water can absorb it; 5. Regularly clean the dashboard. Sources of odors inside a car include: 1. A burnt plastic smell caused by overheating or short circuits in electrical components; 2. A dirty air filter causing odors when the AC is turned on; 3. A gasoline smell due to a damaged fuel tank; 4. A burnt smell from worn brake pads.
17
0
Share

Difference Between Wet and Dry Dual-Clutch Transmissions

Dry and wet dual-clutch transmissions differ primarily in the medium connecting the driving plate and the driven plate. Below are the specific differences between the two: 1. The medium connecting the driving plate and the driven plate differs; dry dual-clutch transmissions rely on air for transmission, whereas wet dual-clutch transmissions use oil. 2. Mechanical transmission efficiency varies: Wet dual-clutch transmissions require hydraulic pumps, lubricating fluid, cooling pipes, and external cooling systems, resulting in lower mechanical transmission efficiency. In contrast, dry dual-clutch transmissions, to reduce costs, often feature lightweight or omitted hydraulic systems during production, giving them an advantage in space structure optimization. Additionally, because dry dual-clutch transmissions lack hydraulic assistance, their transmission efficiency is higher, offering better fuel economy compared to wet dual-clutch transmissions.
13
5
Share

What is the appropriate height for the seat?

The appropriate height adjustment for a car seat depends on the driver's body size. It should be adjusted as high as possible while maintaining a gap of about one fist between the top of the head and the car roof. This ensures a wider field of vision and enhances safety. Here are some related details: Seat Comfort: Modern car seats must meet two key requirements: ease of adjustment and comfort. This means drivers can adjust the seat to the optimal position for the best visibility, making it easier to operate the steering wheel, pedals, gear lever, etc., while also achieving the most comfortable and familiar seating angle. Precautions: When adjusting the seat, avoid positioning it too close to the steering wheel to prevent serious injury in case of an accident.
1
4
Share

How to Determine the Position of the Wheels When Driving a Car?

Here are the relevant methods for determining the position of the wheels when driving a car: 1. Use the wiper blades to determine the position of the wheels: The method involves observing the nodes on both sides of the wiper blades, as the position of these nodes corresponds to the path the wheels will follow while driving. 2. Use the side mirrors to determine the position of the wheels: This method involves observing the door handles on both sides through the mirrors. When the door handles align with the solid lines on the road, it indicates that the wheels are passing over those lines. 3. Use the center of the windshield to determine the position of the wheels: By observing the solid lines on the road, if they align with the center of the windshield, it means the wheels are following that path.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.