Which is on and which is off?

How much fuel does a car consume per kilometer?

Car fuel consumption per kilometer is 5-8 liters. Fuel consumption is generally related to the car's displacement. For household economy cars, the fuel consumption per 100 kilometers is approximately 5L, 7L, 10L, and 12L for 1.0, 1.3, 1.6, and 2.0 engines, respectively. However, fuel consumption is a complex factor and also depends on the car's performance, road conditions, and the driver's skills. Car fuel consumption is directly related to the engine temperature and fuel efficiency. Both excessively high and low temperatures will lead to increased fuel consumption. The engine's working water temperature should be maintained between 80°C and 90°C. Preheating the engine during cold starts can significantly save fuel. Cars must be regularly maintained. The intake system must be kept clean and unobstructed. The air filter should be frequently cleaned, the tension of all belts should be appropriate, tire pressure should not be too low, and brake shoe clearance should be regularly adjusted to avoid friction.

18

3

Share

Which is better, a sedan or an SUV?

Good off-road capability is undoubtedly the absolute advantage of SUV models. Even though most SUVs are urban SUVs, they still have a certain level of off-road capability. When facing rough roads, SUVs have an absolute advantage over sedans. This is also why many people are keen on SUVs. For them, SUVs are more visually appealing, appearing more grand and stylish. With the increased height of SUV bodies, manufacturers often opt for stiffer suspension tuning due to the SUV's positioning. Additionally, because of their larger size, the frontal area inevitably increases, resulting in much higher wind noise compared to sedans. With oil prices continuing to rise and no certainty of a drop, every car owner hopes their vehicle is fuel-efficient. However, high fuel consumption is a common characteristic of SUV models. Due to their larger size and higher drag coefficient, they naturally consume more fuel. When novice drivers operate SUVs or off-road vehicles, they need to make wider turns compared to other vehicles to avoid situations like scraping.

19

2

Share

Which of the Three Car Modes is More Fuel-Efficient?

Economy mode is fuel-efficient. Economy mode, also known as ECO mode, is optimized for ecological energy savings, primarily aimed at reducing fuel consumption in motor vehicles. This mode can be used for extended periods and switched at any time via a toggle button. When the vehicle is driven at high speeds, the mode will automatically turn off. Here are some related details: 1. Switching driving modes requires turning off the vehicle: No, it does not require turning off the vehicle. The driving mode can be switched under any circumstances, whether the vehicle is in motion or stationary. It is very convenient to use, allowing drivers to select the appropriate mode based on different driving conditions. Switching modes is effortless and adds a certain level of enjoyment to driving. 2. How to save fuel while driving: Activate the fuel-saving mode, avoid sudden braking and rapid acceleration, reduce the weight in the trunk by carrying only essential items, and refrain from storing unnecessary objects. Always use the specified fuel grade recommended for the vehicle and minimize the use of air conditioning to effectively save fuel.

10

3

Share

What causes the EA888 engine to report a rich mixture in cylinder 1 system?

The EA888 engine reporting a rich mixture in cylinder 1 system is due to increased carbon deposits in the combustion chamber, which reduce the combustion chamber volume, increase the compression ratio, resulting in higher cylinder pressure; an overly rich air-fuel mixture in the combustion chamber; or exhaust flow obstruction or a clogged catalytic converter can also lead to excessive cylinder pressure. Solutions to address the false impression of high cylinder pressure are as follows: 1. Use the natural cleaning method: You can drive at high speeds for a few trips to utilize the high-speed airflow to clean the combustion chamber. This method is suitable for vehicles with relatively short-term, minor, and soft carbon deposits. 2. Use a combustion chamber cleaner for non-disassembly cleaning: Excessive cylinder pressure in a car engine can cause engine knocking and difficulty starting. Uneven cylinder pressure across the engine can result in rough engine operation or misfiring. Insufficient cylinder pressure in the engine can lead to reduced engine power, increased fuel or oil consumption, excessive emissions, and difficulty starting.

8

4

Share

What Items Are Replaced During a Minor Maintenance Service?

Items that need to be replaced during a minor maintenance service: 1. Engine oil: The replacement intervals for engine oil are categorized into three types based on time and mileage: mineral oil (6 months or 5,000 km), semi-synthetic oil (9 months or 7,500 km), and full-synthetic oil (1 year or 10,000 km). These intervals can be adjusted based on driving conditions—delaying replacement by 1,000-2,000 km is acceptable for urban driving without traffic congestion, while harsh environments may require earlier oil inspection. 2. Oil filter: The oil filter does not need separate inspection; it should be replaced whenever the engine oil is changed. 3. Air filter and cabin air filter: The air filter can be replaced according to vehicle usage conditions. Under normal circumstances, replacement before 20,000 km is sufficient. For drivers who smoke or operate in rural environments, replacement every 10,000 km is recommended, while sandy or dusty environments may require replacement every 5,000-8,000 km.

14

1

Share

How to Check the Manufacturing Date of a Motorcycle?

There are several methods to check the manufacturing date of a motorcycle: 1. Certificate of Conformity: Check the vehicle's Certificate of Conformity, which contains the exact production date, specifying the year, month, and day. 2. Frame Nameplate: Look at the frame nameplate, which indicates the production year and month. The nameplate is a small black-and-white metal plate riveted to the frame. The location of the nameplate varies by brand and model, and its position is usually described in the first few pages of the user manual. 3. Vehicle Identification Number (VIN): Check the VIN. The 10th digit of the VIN represents the production year. For vehicles manufactured before 2010, the 10th digit is a number. For example, if the 10th digit is 8, it means the vehicle was produced in 2008. For vehicles manufactured after 2010, the 10th digit is a letter, with 'A' representing 2010, 'B' representing 2011, and so on.

20

0

Share

Which is on and which is off?

How much fuel does a car consume per kilometer?

Which is better, a sedan or an SUV?

Which of the Three Car Modes is More Fuel-Efficient?

What causes the EA888 engine to report a rich mixture in cylinder 1 system?

What Items Are Replaced During a Minor Maintenance Service?

How to Check the Manufacturing Date of a Motorcycle?

Why Are Used Paladins So Cheap?

Why is the keyless entry not sensitive?

Can you park by the roadside with a solid white line?

What is the general capacity of a car battery?