Which is more suitable for a new car: coating or crystal coating?

2 Answers
Deborah
07/28/25 10:38pm
Crystal coating is more suitable for a new car. Crystal coating provides a reliable sealing technology for the car paint, offering efficient and long-lasting protection to prevent environmental factors from affecting the paint color. The steps for crystal coating are as follows: 1. Conduct a comprehensive and detailed inspection of the vehicle to check for any scratches or peeling paint. 2. Wash the car with neutral car shampoo in the order from front to back and top to bottom, and carefully wipe the body with a soft towel. 3. Knead the clay repeatedly, place it in the palm of your hand, and move it horizontally across the paint surface with water. 4. Use tape to protect different parts of the car body. 5. Choose the appropriate polishing compound based on the actual condition of the paint surface for polishing. 6. Rinse the entire car carefully with water and dry the paint surface using an absorbent towel and an efficient dry cleaning gun. 7. Use specialized degreasing water to degrease the paint surface. 8. Clean and care for the paint surface, edges, door seams, engine compartment, car windows, and tires. 9. Confirm that the entire process is completed correctly.
Was this review help?
7
0
Share
VanAutumn
08/12/25 3:07am
Just bought a new car, and when it comes to ceramic coating vs. wax coating, let me start from the cost perspective. Ceramic coating is much more expensive, starting at around 3,000 to 4,000 RMB, but it lasts about two years and offers superior protection. The paint on a new car is its most valuable asset, so spending this money is worthwhile—it saves you from future touch-up costs. Wax coating is cheaper, costing just a hundred or so RMB per car wash, but it requires frequent maintenance. A new car might lose its shine after just a few months with wax. I chose ceramic coating because I believe doing it while the car is new helps lock in the fresh paint, providing better scratch and fade resistance, and in the long run, it’s more hassle-free and cost-effective. If money isn’t an issue, definitely go for ceramic coating; if you’re on a tight budget, wax coating can be a temporary solution, but taking good care of a new car is never wrong.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

What are the reasons for the Accord engine malfunction indicator light to illuminate?

"The engine malfunction indicator light may illuminate due to various reasons such as poor fuel quality, oxygen sensor failure, thermostat failure, etc. It is recommended to first inspect the vehicle, listen for any abnormal engine noises, and check if there are any issues with the exhaust. If the situation is severe, it is advisable to visit a 4S store for inspection and repair as soon as possible. Solutions for the Accord engine malfunction indicator light illumination: Many drivers notice that the engine malfunction indicator light comes on after refueling, but the engine operates and sounds normal upon starting the car. This is usually caused by fuel quality issues. Generally, adding a fuel additive or refueling with fresh gasoline after the current fuel is used up can resolve the issue. In such cases, the vehicle can continue to be driven without safety concerns. If the engine malfunction indicator light illuminates while driving, it is usually due to a problem with the engine sensors. From a repair perspective, one critical component is the oxygen sensor. Typically, such issues arise from problems with the front oxygen sensor, which detects abnormal data on the air-fuel mixture ratio. A repair shop can diagnose and replace the sensor using a computer. When the thermostat malfunctions, the engine malfunction indicator light may also illuminate. If the water temperature gauge fails to reach the ideal temperature (usually 90 degrees) for an extended period while driving, the engine malfunction indicator light will come on. Generally, failure to replace the coolant within the specified mileage or a malfunctioning engine radiator leading to engine overheating can cause the thermostat to rust or even fail. Recommended solution: First, thoroughly inspect the vehicle, listen for any abnormal engine noises, and check if the exhaust appears excessively black or blue. If the situation is severe, do not continue driving recklessly. Contact a 4S store for towing and arrange for prompt repairs."
9
5
Share

Does the Model 3 have strong high-speed acceleration?

Compared to initial acceleration, the high-speed acceleration capability is not as robust. Below are the specific details about the Tesla Model 3: Vehicle Positioning: The Model 3 is a mid-sized electric vehicle with a wheelbase of 2875 mm, and dimensions of 4694 mm in length, 1850 mm in width, and 1443 mm in height. Powertrain: The Model 3 is available in both rear-wheel drive and all-wheel drive configurations. The all-wheel drive version features dual motors, while the rear-wheel drive version has a single motor. The all-wheel drive Model 3 has a combined motor power of 340 kW and a combined torque of 639 Nm. The rear-wheel drive version has a maximum motor power of 202 kW and a maximum torque of 404 Nm. Battery: The Model 3 uses ternary lithium batteries across all variants, which offer higher energy density and are lighter in weight.
13
1
Share

Is the Dongfeng Fengxing T5 EVO a joint venture car?

No, it is a domestic car. Here is an introduction about the Dongfeng Fengxing T5 EVO: In terms of intelligent vehicle system: The Future-Link 4.0 system equipped in the Fengxing T5 EVO performs commendably in natural voice command interaction. Paired with the in-car WeChat function, it can completely free your hands, allowing you to control corresponding commands and send/receive WeChat messages via voice, enhancing convenience while making driving safer. In terms of transmission: The Fengxing T5 EVO adopts a Magna 7-speed dual-clutch transmission. This dual-clutch transmission is a wet-type and is a product of Magna, ensuring quality. As long as the Fengxing T5 EVO puts enough effort into power matching and avoids faults in electrical equipment and chassis, its quality will be guaranteed.
2
0
Share

What is the top speed of the KTM 250?

KTM 125 Duke has a top speed of 120 km/h. Here is the relevant information: Displacement: The actual displacement of the 125cc model is 124.71cc, featuring a liquid-cooled, fuel-injected single-cylinder engine. It delivers a maximum power of 14.5 bhp and a peak torque of 12 Nm, paired with a 6-speed transmission. Compared to its peers, it has a power advantage. Appearance: The 2021 KTM 250 DUKE introduces new minimalist silver and mysterious black color options, both embodying trendy and classic elements. The overall appearance is similar to the 390 DUKE, with the main difference being the headlight section. It does not adopt the overseas "explosive Kendo face" design but retains the "shield-shaped single headlight" design, while the forward-leaning lines remain equally aggressive.
15
3
Share

What are the differences between the C63 AMG Coupe and Sedan?

There are differences in passenger capacity, but the configurations are quite similar. Here are the specific details: Exterior: The side profile maintains a standard fastback silhouette, with dual waistlines running through the body. This design not only enhances visual impact but also effectively outlines the bold front end. Combined with black grille, black mirrors, and blackened window trim, it represents the model's commanding presence and luxury. Additionally, there's a distinctive V8 badge behind the front wheel fender. Interior: It features an AMG steering wheel and carbon fiber trim, along with significant changes to the central display screen. AMG logos added in details highlight its luxurious identity. The cabin atmosphere isn't as aggressive as the exterior. The three-spoke AMG steering wheel, both in design and functionality, serves as the perfect finishing touch. The flat-bottom grip is wrapped in Nappa leather, with DINAMICA microfiber material added at the 3 and 9 o'clock positions for exceptional comfort.
4
0
Share

Which lights should be turned on when driving in foggy weather?

Turn on the fog lights when driving in foggy weather. Fog lights: Generally refers to automotive fog lights. Automotive fog lights are installed at the front and rear of the vehicle, used for road illumination and safety warnings during rainy or foggy weather conditions. They enhance visibility for both the driver and other traffic participants. Operation methods for fog lights: Button activation for fog lights. Some vehicles use buttons to activate front and rear fog lights, where there are fog light buttons near the instrument panel. After turning on the lights, pressing the front fog light button will illuminate the front fog lights; pressing the rear fog light button will illuminate the rear fog lights. Rotary switch for fog lights. Some vehicles have a light control lever under the steering wheel or a rotary fog light switch located under the left-hand side air conditioning vent to activate the fog lights; rotary-type fog light activation under the left-hand side air conditioning vent.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.