Which is more serious: fake license plates or no license plates on motorcycles?

2 Answers
LaAutumn
09/04/25 6:33am
Motorcycle fake license plates have more severe consequences because using fake plates indicates active intent to violate the law. Below is relevant information about motorcycle license plates: Consequences of fake plates: If the license plate is identified as fake through authentication, the driver will face penalties for suspected use of another vehicle's license plate, driving without proper certification, and other violations. This includes fines, a 24-point deduction from the driving record, and up to 20 days of administrative detention. Consequences of no license plates: Driving a motorcycle without license plates will result in fines and up to 15 days of detention. Driving without a license not only disrupts road traffic order but also affects the normal passage of other road users and the orderly management of traffic if the driver exceeds speed limits, runs red lights, or fails to drive in the designated lane.
Was this review help?
2
1
Share
VonAriel
09/16/25 7:29am
I've been riding motorcycles for decades, and this is an interesting question. Both fake plates and unregistered plates are dangerous, but fake plates are more severe. Fake plates involve using counterfeit license plates, which may be tied to identity fraud. Criminals or gangs often use fake plates to evade punishment. In cases of hit-and-run, it becomes difficult for the police to track them down, putting other innocent people at risk. Unregistered vehicles simply lack proper registration—the owner might just be lazy or trying to save on fees—but vehicle information is easier to verify, and liability in accidents is clearer. Additionally, fake plates fuel black markets, encouraging more people to risk buying or selling counterfeit documents, which harms social order. Unregistered vehicles usually just result in fines, but fake plates can lead to criminal charges or license revocation. As a rider, I always remind my friends to stay away from fake-plate vehicles—safety first, and avoid both altogether.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

What are the solutions for car body vibration?

The solutions for car body vibration are: 1. Inspect and adjust the front wheel alignment angles and toe-in; 2. Perform wheel dynamic balance inspection; 3. Adjust tire pressure or replace tires; 4. Perform driveshaft dynamic balance inspection; 5. Choose high-quality engine oil; 6. Inspect the engine ignition system. The causes of car body vibration are: 1. Uneven brake disc surface with excessive radial runout; 2. Significant deviation in wheel alignment data; 3. Excessive or insufficient tire pressure; 4. Abnormal tire wear; 5. Rim deformation; 6. Shock absorber failure; 7. Tire dynamic balance malfunction; 8. Engine power failure.
12
2
Share

What is the correct way to use automatic transmission gears?

The correct way to use automatic transmission gears is: 1. Use P (Park) gear when parking; 2. Shift to N (Neutral) gear at red lights; 3. Shift to R (Reverse) gear when reversing; 4. Use D (Drive) gear for normal driving; 5. Use S (Sport) gear for quick overtaking; 6. Use M (Manual) mode for manual shifting. Precautions for driving an automatic transmission vehicle are: 1. Do not shift into P gear while driving; 2. After driving, the engine must be turned off and shifted into P gear before the key can be removed; 3. Do not shift into N gear to coast while driving; 4. Start the vehicle in P or N gear. To move from P gear, press the brake pedal, turn on the power, shift to N gear while pressing the brake, and after ignition, shift to D gear to move forward directly.
3
3
Share

What is the working principle of the camshaft position sensor?

The working principle of the camshaft position sensor is: to provide signals for ignition timing and confirmation of crankshaft position, used to detect the top dead center of the piston, crankshaft angle, and engine speed. The symptoms of a damaged camshaft position sensor include: 1. Difficulty in ignition, making the engine hard to start; 2. Difficulty in accelerating when the engine is hot; 3. Increased fuel consumption, lack of power, and difficulty in acceleration; 4. The car shakes while driving. The function of the camshaft position sensor is: to collect the position signal of the valve camshaft and input the signal into the electronic control unit to determine the ignition timing and fuel injection timing.
3
0
Share

How to Distinguish Between High and Low Oil Viscosity?

The method to distinguish between high and low oil viscosity is: The oil viscosity grade is indicated on the oil bottle, with 'SAE' representing the oil's viscosity rating. The number before 'W' indicates the winter viscosity—the smaller the number, the lower the viscosity. The number after 'W' indicates the summer viscosity—the larger the number, the higher the viscosity. The functions of engine oil are: 1. Lubricating between the piston and cylinder, and between the main shaft and bearing; 2. Carrying heat back to the oil tank and then dissipating it into the air to help the radiator cool the engine; 3. Transporting carbon deposits, sludge, and worn metal particles from engine components back to the oil tank through circulation, cleaning dirt generated on the working surfaces of parts; 4. Forming a seal between the piston ring and piston to reduce gas leakage and prevent external contaminants from entering; 5. Preventing rust and corrosion; 6. Absorbing the load on the piston, piston pin, connecting rod, and crankshaft bearings; 7. Reducing the friction coefficient.
7
5
Share

Is the Mercedes-Benz A45 AMG a four-wheel drive?

The Mercedes-Benz A45 AMG is a four-wheel drive vehicle with a front-engine, four-wheel-drive layout. It features an adaptive four-wheel-drive system, with a front MacPherson strut independent suspension and a rear multi-link independent suspension. In terms of interior, the Mercedes-Benz A45 AMG is equipped with a unique instrument panel, an AMG sports steering wheel, and Recaro sports seats, with carbon fiber materials extensively used throughout the cabin. The Mercedes-Benz A45 AMG is powered by a 2.0L four-cylinder turbocharged engine, delivering a maximum power output of 360kW and a peak torque of 450Nm. The vehicle's dimensions are 4439mm in length, 1796mm in width, and 1403mm in height, with a wheelbase of 2729mm.
14
0
Share

How long in advance should I renew my driver's license before it expires?

Article 57 of the "Traffic Regulations and Penalty Points Rules": Motor vehicle drivers should apply for license renewal at the vehicle management office where the driver's license was issued or at another vehicle management office within 90 days before the expiration of the motor vehicle driver's license. If the driver's license expires, the traffic police will impose a fine upon discovery but will not deduct points. There is a latest deadline for license renewal. If the license has been expired for less than one year, it can be renewed through the normal process; if it has been expired for one to three years, the license will be canceled, but it can be re-obtained by passing the subject one exam; if it has been expired for more than three years, the license will be canceled. Article 57 of the "Traffic Regulations and Penalty Points Rules": Motor vehicle drivers should apply for license renewal at the vehicle management office where the driver's license was issued or at another vehicle management office within 90 days before the expiration of the motor vehicle driver's license. When applying, the applicant should fill out an application form and submit the following documents and certificates: the identity proof of the motor vehicle driver, the motor vehicle driver's license, and a medical certificate issued by a county-level or higher medical institution or a military medical institution at the regiment level or above. For those applying for a special small automatic passenger vehicle for the disabled, a medical certificate issued by a specialized medical institution designated by the provincial health authority should be submitted. Materials required for renewing a driver's license: original ID card and its copy, a qualified medical examination form from a hospital designated by the vehicle management office, three one-inch white background color photos, a completed driver's license renewal application form, and the processing fee. The photos and medical examination proof required for renewal can be brought by the applicant. If worried about the self-brought materials being unqualified, they can be processed directly at the traffic police station's license office to avoid delays. Relevant matters for renewing the driver's license upon expiration: Regarding renewal: For the annual review and renewal of an expired driver's license, the old driver's license needs to be surrendered to the vehicle management office. Before renewal, all related traffic violation information must be cleared; otherwise, the application will not be accepted. The motor vehicle driver's license can be renewed through the mobile app "Traffic Management 12123," or through the vehicle management office, traffic management department, or public security authorities, effectively renewing the motor vehicle driver's license.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.