···
Log in / Register

Which is More Fuel-Efficient Between Mercedes-Benz C Mode and E Mode?

1 Answers
EzraLynn
07/23/25 10:24pm
Mercedes-Benz's E mode is more fuel-efficient than the C mode. Mercedes-Benz offers five driving modes: Eco (Economy mode), Comfort mode, Sport mode, Sport+ mode, and Individual mode. These driving modes require the driver to manually switch between them while driving. The main differences between E mode and C mode are as follows: 1. During normal driving, the Economy mode and Comfort mode are the most commonly used driving modes. While driving, the driver can control different systems related to driving through the vehicle's onboard computer. In Economy mode, the throttle response becomes less sensitive, and there is no noticeable acceleration effect during the initial stages of driving. In Comfort mode, all settings prioritize comfort, resulting in very smooth power delivery and better driving comfort. Sport mode offers more responsive power delivery, delayed gear shifts, and a rapid increase in engine RPM. The Sport+ mode shifts gears even faster, and you can feel some jerking at low speeds. 2. The Economy mode is the most fuel-efficient driving mode. It is recommended to use Economy mode or Comfort mode as much as possible while driving.
Was this review help?
12
2
Share
More Forum Discussions

How to Pay the Fine for Illegal Parking Ticket?

Traffic police can point out the illegal act and issue a verbal warning, requiring the driver to leave immediately. Bring your driver's license, vehicle license, cash or bank card to the local administrative hall (or traffic police station) to handle the fine payment on-site. On the official website, follow the interface prompts to enter the license plate number, the last six or four digits of the engine number, ID card, and other relevant information to pay the fine on behalf of the offender.
1
0
Share

How to Disable the Anti-Theft Engine Lock on Landwind X7?

First, disconnect the negative terminal of the battery for a period of time. Wait for the engine's protection data to be cleared before reconnecting it. Generally, a power disconnection of about 10 seconds is sufficient. Call for a tow truck and avoid going to ordinary repair shops for repairs. Instead, go to the designated 4S store.
1
5
Share

How to Turn on Hazard Lights?

First, start the car to power up the entire vehicle. Press the button once to turn on the hazard lights. Pull over to the side of the road to alert other vehicles or pedestrians that your car is experiencing a special situation, prompting them to yield in time.
11
5
Share

What to do if there are traffic violations after selling the car without transferring ownership?

After selling the car to someone else without transferring ownership, traffic violations are generally penalized against the previous owner. At the traffic violation handling window of the traffic police department, the license holder must be present in person. For violations outside of highways, a mobile app can be used for registration. Bring your valid documents to the vehicle management office for processing. After receiving the notice at the window, you usually need to go to the bank counter to pay the fine.
4
4
Share

What are the differences between dq380 and dq381?

The differences between dq380 and dq381 lie in the fact that dq381 can reduce engine wear and lower fuel consumption compared to dq380 in terms of performance. Here are the relevant details: 1. In the dq380, the oil pump gear meshes with the clutch gear and is powered by the clutch. Therefore, as long as the clutch is engaged, the oil pump operates, creating oil pressure. This means that under any condition, a portion of the engine's kinetic energy is consumed. In contrast, the dq381's oil pump does not mesh with the clutch but has a dedicated power source. It operates only when oil pressure is needed and stops when not in use, thereby reducing the oil pump's consumption of the engine's kinetic energy. In theory, this also reduces emissions and achieves the goal of lowering fuel consumption. 2. Compared to the dq380, the dq381 incorporates several changes, including the use of lower-viscosity ATF oil, friction optimization for seals and bearings, as well as modifications to the clutch module and hydraulic pump system. In the clutch module, the K1 return spring has been changed from a helical type in the dq380 to a diaphragm type. On the hydraulic side, an additional electric oil pump linked to the CAN bus has been added, controlled via valve adjustments. This supports the hydraulic circuit for clamping the clutch plates and operating the shift mechanism. The oil can also flow to the pressure circuit for lubricating and cooling the shafts, gears, and clutch plates. With the addition of the electric oil pump, the transmission can continue to supply oil to components during start-stop operation and coasting mode without being affected by engine speed, improving the responsiveness of clutch re-engagement when the engine restarts.
9
4
Share

What are the 6 steps to inspect a new car?

Verify vehicle information The first step when picking up a new car is to verify the model color and configuration. Generally, there is a metal nameplate near the lower left or right corner of the engine hood. If the production date is from long ago, it might be an inventory car. Move the vehicle to a place with ample sunlight. When inspecting the paint, position yourself at a 45° angle to the area being checked and observe its appearance under sunlight. When inspecting the tires, first check if the tire hairs are fresh.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.