Which is More Fuel-Efficient, 92 or 95?

2 Answers
DeEmily
07/28/25 3:57pm
Generally, 95-octane gasoline is more fuel-efficient than 92-octane gasoline, as it has better anti-knock properties. Below is relevant information about gasoline: 1. Classification Standard: In China, gasoline is produced and sold based on its octane rating. According to quality standards, gasoline grades are classified by their octane value. 2. Key Characteristics: The important properties of gasoline include volatility, stability, anti-knock performance, corrosiveness, and cleanliness. (1) Volatility: Gasoline must rapidly vaporize and form a uniform combustible mixture with air in the engine cylinder, which is primarily determined by its own volatility. (2) Stability: The ability of gasoline to resist oxidation under normal temperature and liquid-phase conditions is called its oxidation stability, or simply stability. (3) Anti-knock Performance: The property that measures whether a fuel is prone to knocking is called anti-knock performance, which is indicated by the octane number (RON). (4) Corrosiveness: The corrosiveness of gasoline is related to sulfur and sulfur compounds, organic acids, water-soluble acids, or bases. (5) Cleanliness: Gasoline often contains mechanical impurities and water.
Was this review help?
20
1
Share
VioletDella
08/11/25 11:06pm
I've driven several cars and specifically tested the fuel consumption of 92 and 95 octane gasoline. In reality, the mileage difference between the two isn't significant. 92 octane is cheaper but might consume slightly more fuel, while 95 octane is more expensive but keeps the engine running more smoothly. I remember once on a long trip using 95 octane, the same 50 liters got me about 30 kilometers more than with 92 octane. However, this varies greatly depending on the car—my old Toyota actually runs more economically on 92 octane. The key to choosing lies in your car's compression ratio; just follow the recommended octane number listed on the fuel cap. Don't believe claims that higher octane means longer burn—what the manufacturer recommends is what's best for your car.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

How to Distinguish Forged and Cast Wheels?

Methods to distinguish forged and cast wheels are as follows: 1. Sound Test: Wheels made from high-quality aluminum are denser, so they produce a clearer ringing sound when struck. Wheels manufactured using liquid aluminum forging technology produce the clearest sound, with echoes sometimes lasting several seconds. If the sound is dull or almost nonexistent, it's best to avoid them. 2. Surface Inspection: High-quality wheels not only have excellent surface coating but also rarely have sand holes. Inspect each wheel carefully before purchase to ensure there is no deformation or wear caused by packing or transportation. 3. Dynamic Balance Test: Place the new wheel on a dynamic balancing machine for testing. First, visually check if the rim is round during rotation—if it appears visibly out of round, discard it immediately. If it appears round, check the wheel's imbalance. According to OEM standards, wheels with less than 30g of imbalance are generally acceptable.
12
0
Share

What is the Difference Between Four-Wheel Drive and Two-Wheel Drive?

Four-wheel drive (4WD) and two-wheel drive (2WD) differ in the following aspects: 1. Different driving wheels: 4WD maintains all four wheels as driving wheels throughout the journey, while 2WD only has two wheels as driving wheels. 2. Different stability: 4WD provides greater traction, ensuring better stability during acceleration, whereas 2WD offers relatively poorer stability. The driving method refers to the power source that propels crude oil to the bottom of the well, indicating the arrangement of the engine and the number and position of the driving wheels. Generally, passenger vehicles have two rows of wheels, front and rear, with the wheels directly driven by the engine to push (or pull) the car forward being the driving wheels.
14
3
Share

How to Check if a Vehicle Meets China VI Emission Standards?

To determine whether a vehicle meets China VI emission standards, you can use the following methods: 1. Check the vehicle conformity certificate. Every vehicle comes with a conformity certificate upon leaving the factory, which clearly states the emission standard of the vehicle. 2. Refer to the vehicle's accompanying documents. Look for the emission standard in the vehicle information section of the document list. 3. Examine the certificate of conformity, which includes exhaust emissions and indicates the corresponding emission standard. 4. Visit the official website of the vehicle environmental protection department. Locate the public inquiry platform at the bottom of the homepage, enter the vehicle's VIN code and the last six digits of the engine number to retrieve the information. 5. Inspect the vehicle's environmental protection label. The back of the environmental protection label affixed to the front windshield of the car clearly displays the vehicle's emission standard.
16
4
Share

Why does the front wheel of the Magotan make noise when going over bumps?

Here are the reasons why the front wheel of the Magotan makes noise when going over bumps: 1. Aging rubber bushings in the front suspension. Simply replace the aged rubber bushings. 2. Worn pressure bearings in the shock absorber. Replace the worn pressure bearings to restore normal operation and ensure stable, comfortable, and safe driving through timely maintenance. Below is additional information about the Magotan: 1. The Magotan is a mid-size car under the Volkswagen brand. 2. The dimensions of this car are 4865mm in length, 1832mm in width, 1471mm in height, with a wheelbase of 2871mm. 3. The Magotan has consistently used three types of engines: a 1.4-liter turbocharged engine, a low-power version 2.0-liter turbocharged engine, and a high-power version 2.0-liter turbocharged engine.
12
2
Share

How to Fix a Bent License Plate?

If the license plate is not severely bent, you can straighten it back by hand. If it's badly bent, remove the license plate. Remember not to use metal tools to hammer it flat, as this can easily damage the paint on the plate. Instead, use a rubber hammer or a wooden tool to gently tap it back into shape. If the bending has caused cracks or breaks in the license plate, it is recommended to apply for a replacement at the local vehicle management office. A license plate, also known as a vehicle registration plate, is a plate attached to the front and rear of a vehicle. It is typically made of aluminum, sheet metal, plastic, or paper, and displays the vehicle's registration number, registration region, and other relevant information. The primary purpose of a license plate is to identify the vehicle's registered region, and it can also be used to trace the vehicle's owner and registration details.
7
1
Share

How to Set the Time on a Cruze?

To set the time on a Cruze: Press CONFIG on the center console settings, then enter the vehicle parameter settings where the first option is for adjusting the time and date. Additional relevant information is as follows: 1. The Cruze is a new-generation model developed by General Motors with the goal of creating a benchmark in design and performance for compact cars, integrating global resources. In terms of body dimensions, the Cruze measures 4666mm in length, 1807mm in width, and 1460mm in height, with a wheelbase of 2700mm. 2. The new Cruze offers six body colors: Aurora White, Obsidian Black, Cold Platinum Silver, Glacier Blue, Titanium Gray, and Flame Red, along with four interior color schemes: Starry Dark Gray, Brocade Dark Gray, Elegant Gray-Black, and Saddle Brown.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.