Which is more durable, the Baojun 510 AMT or CVT?

1 Answers
NaomiDella
07/25/25 12:59pm
In terms of reliability, both perform well. However, in terms of driving experience, the CVT transmission is significantly better than the AMT. The AMT transmission has strong gear shift jerks and relatively chaotic shift logic, making its overall performance inferior to the CVT transmission. Introduction to the Baojun 510 transmission: 1. Technical introduction: The 6-speed manual transmission used in the Baojun 510 is a self-developed product by Great Wall. This transmission has a simple structure, high transmission efficiency, and is purely mechanically controlled. It features short shift travel, fast response, moderate force, and very clear gear positions, making shifts smoother. 2. Transmission issues: The 6MT transmission in the Baojun 510 has a large gear ratio gap between 1st and 2nd gears, resulting in jerky shifts and issues with noise and vibration. Additionally, the 6-speed transmission demands higher driving skills because, due to the gear ratio, it requires more frequent shifts compared to a 5-speed and places higher demands on clutch and throttle coordination.
Was this review help?
17
5
Share
More Forum Discussions

What does the exclamation mark with a P on the car dashboard mean?

On the car dashboard, a constant illumination of an exclamation mark and the letter P indicates the handbrake warning light, also known as the parking brake indicator. Here is a detailed introduction about car brakes: 1. Overview: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, and other transportation tools or machinery. The general principle of braking is to fix a wheel or disc on the high-speed shaft of the machine and install corresponding brake shoes, bands, or discs on the machine base, which generate braking torque under external force. 2. Brake Pads: Car brake pads, also called brake linings, are friction materials fixed on the rotating brake drum or brake disc of the wheel. The friction linings and blocks bear external pressure to generate friction, thereby achieving vehicle deceleration.
9
5
Share

Why Shouldn't You Engage the Handbrake When Parking on Rainy Days?

The reason why you shouldn't engage the handbrake when parking on rainy days is that the handbrake and brake discs are prone to rust after coming into contact with water. Here are detailed explanations about automotive brakes: 1. Overview: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other transport tools, or machinery. The general principle of braking is to fix a wheel or disc on the high-speed shaft of the machine and install corresponding brake shoes, bands, or discs on the machine base, which generate braking torque under external force. 2. Brake Pads: Automotive brake pads, also known as automotive brake linings, refer to the friction materials fixed on the rotating brake drums or brake discs of wheels. The friction linings and friction blocks within them withstand external pressure to generate friction, thereby achieving vehicle deceleration.
4
3
Share

Just Changed the Oil, Why is the Oil Warning Light Still On?

Normally, the oil warning light on the dashboard should illuminate when the ignition is turned on. Below is an explanation of why the oil warning light may still be on after an oil change: 1. Causes: (1) Insufficient oil level (relatively common) - The oil pump's output decreases or fails to pump oil due to air intake, leading to a drop in oil pressure and triggering the warning light. (2) Faulty oil pressure switch (oil sensor) (relatively common). (3) Short circuit in the warning light circuit, preventing the light from turning off. (4) Fault in the wiring between the oil pressure switch and the dashboard. (5) Dashboard malfunction (very unlikely). (6) Insufficient pressure in the engine's internal lubrication system (relatively common). 2. Fault Diagnosis and Repair: (1) Insufficient oil level: If the oil level is too low, the oil pump's output decreases or fails to pump oil due to air intake, causing a drop in oil pressure. This leads to increased wear on the crankshaft and bearings, as well as the cylinder liners and pistons due to poor lubrication. Therefore, check the oil level in the oil pan daily before operation and ensure it is adequate. If low, top up with the same type of oil from the same manufacturer. (2) Oil pump failure: If the oil pump's drive gear or drive shaft key is damaged or dislodged, or if the oil pickup screen is damaged, allowing debris to enter and jam the gears, the oil pump may stop working, causing oil pressure to drop to zero. In this case, replace the damaged key or oil pickup screen.
1
4
Share

How to Handle 12 Points Deducted from a Motor Vehicle License?

If a motor vehicle driver accumulates 12 penalty points due to traffic violations, the traffic management department of the public security authority shall detain their motor vehicle driving license. After the motor vehicle driver participates in the required study, the vehicle management office shall conduct a test on road traffic safety laws, regulations, and related knowledge within 20 days. If the test is passed, the penalty points will be cleared, and the motor vehicle driving license will be returned; if the test is failed, the driver must continue to participate in study and retake the test.
18
1
Share

How to Fix Water in Headlights by Yourself?

For relatively minor cases of water ingress in the headlights, there's no need to worry too much. After the headlights have been on for a while, the moisture will evaporate and exit through the vent tube with the heat. Disassemble the headlight, open the cover, and let it dry. Then, inspect the headlight surface for any damage or potential leaks. It is recommended to replace the headlight seal and vent tube. When water enters the headlight, never attempt to dry it by baking, as this can easily damage the headlight since its exterior is made of plastic.
5
0
Share

How to Handle 12 Points Deducted from a C1 License?

If the accumulated points reach 12 within a scoring cycle, the traffic management department of the public security organ shall confiscate the motor vehicle driver's license. Within 15 days, attend a 7-day study session on traffic safety laws, regulations, and related knowledge. After completing the study, the vehicle management office should conduct a test on road traffic safety laws, regulations, and related knowledge within 20 days. If the test is passed, the points will be cleared.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.