Which is Better: Analog or Digital Tire Pressure Gauges?

1 Answers
DeLilliana
07/30/25 12:24am
The following is a comparison between analog and digital tire pressure gauges: 1. Digital tire pressure gauge: Digital pressure gauges feature high precision and stability, with an error margin ≤1%, equipped with internal power supply and micro-power consumption; 2. Analog tire pressure gauge: The measuring system of analog pressure gauges consists of a connector and a Bourdon tube. Changes in measured pressure cause displacement at the free end of the Bourdon tube, which drives the pointer rotation through a linkage mechanism connected to a sector gear, displaying corresponding pressure values on the dial. Both digital and analog tire pressure gauges have their respective advantages, and users are advised to choose based on their specific needs.
Was this review help?
18
2
Share
More Forum Discussions

What does EPC mean on a car?

EPC on a car stands for Electronic Power Control, which is the engine electronic stability system. When this indicator light stays on constantly, it indicates a fault in the engine or electronic system. If the light remains illuminated or flashes after ignition or during driving, it means the management system has detected a fault in the engine or electronic system. In the EPC system, the traditional throttle cable is replaced by a pedal position sensor. The Engine Control Unit (ECU) calculates the optimal throttle opening position based on the feedback data from the pedal position sensor, and then sends a signal to the throttle actuator motor to rotate the throttle to this position.
6
3
Share

How to Turn Off the ECO Mode in a Car?

The method to turn off the ECO mode in a car: 1. Press the OK button on the right side of the steering wheel to enter the menu; 2. Use the triangular arrow buttons on both sides of the steering wheel to select the ECO mode; 3. Press the up and down buttons on the steering wheel to set it to off. ECO is designed with the basic concepts of technology, environmental protection, and economy. The principle of ECO mode is to make a comprehensive judgment and analysis of factors affecting fuel consumption during vehicle operation, such as automatic transmission gear, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit then calculates the optimal fuel quantity to be supplied to the engine.
19
2
Share

What does D gear 123 mean?

D gear 123 refers to the different gear positions within the D gear. D1 gear is used for climbing slopes, D2 gear can be engaged when starting the vehicle, and D3 gear is useful in traffic jams, making overtaking more convenient. When shifting between D gear 123 during normal driving, simply release the accelerator to change gears directly. Automatic transmission cars have six gear positions in total, arranged from top to bottom as: P, R, N, D, S, L. Driving an automatic car primarily using Park (P), Reverse (R), Neutral (N), and Drive (D) gears can fully meet driving needs. However, other functional gears may be required in specific driving conditions.
14
3
Share

If Manual Transmission is Difficult, Should I Take the Automatic Transmission Test?

If manual transmission is difficult, you can opt for the automatic transmission test. The operational difficulty differs between automatic and manual transmissions: Manual transmission primarily relies on the driver manually operating the clutch pedal to change gears; automatic transmission mainly depends on the hydraulic torque converter's hydraulic transmission principle to automatically shift gears. The safety aspects of automatic and manual transmissions also vary: Neutral gear in manual transmission vehicles causes a loss of power, posing potential safety hazards during driving; automatic transmission vehicles cannot use neutral gear while driving, making this method safer. Manual transmission involves manually shifting the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve speed changes. Automatic transmission means the driver does not need to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions.
3
3
Share

Is the annual inspection of a new car based on the production date or the registration date?

The annual inspection of a new car is based on the registration date. New regulations on vehicle annual inspection time: For new cars, an inspection is required every two years for the first six years, and then annually thereafter. The inspection month is the same as the month of vehicle registration. Additionally, if the timing is inconvenient, the inspection can be done up to three months in advance (e.g., if the inspection month is June, it can be conducted in April, May, or June). Early inspection does not affect the next inspection date. Considering most people's habits, congestion usually occurs at the end of the month, so it is recommended to prepare early at the beginning of the month. Documents required for vehicle annual inspection: Vehicle license, duplicate of compulsory traffic accident liability insurance policy, ID card of the person conducting the inspection, triangular warning sign, and fire extinguisher. (Vehicle violations must be resolved, and no modifications are allowed on the vehicle body.) Document explanation: The compulsory traffic accident liability insurance policy consists of the original and duplicate pages. The duplicate page must be submitted during the inspection and will be retained by the inspection agency. The ID card to be carried is that of the person who drives the vehicle to the inspection.
9
0
Share

At what engine temperature does the Qidian 150G1's fan start working?

Qidian 150G1's fan starts working when the engine temperature reaches 90 degrees. Definition of motorcycle engine: A motorcycle engine is a mechanical device that ignites the fuel-air mixture entering the cylinder, converting the thermal energy generated by combustion into mechanical energy. The crankshaft then transmits this power through the transmission mechanism to the motorcycle's rear wheel, transforming it into the driving force for the vehicle. Engine classification: Based on different energy conversion methods, engines can be categorized into electric motors (electrical energy → mechanical energy), hydraulic machines (water energy → mechanical energy), wind turbines (wind energy → mechanical energy), nuclear engines (nuclear energy → mechanical energy), and heat engines (thermal energy → mechanical energy), etc. Heat engines can be further divided into external combustion and internal combustion types. The motorcycle engine is one type of heat engine.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.