Which indicator on the car dashboard shows fuel consumption?

What kind of car wash detergent should be used for a new car?

It is best to use a specialized car wash detergent for new cars. Dedicated car wash liquids are neutral cleaners that are gentle on both hands and paint, primarily composed of natural plant-derived surfactants. Precautions for car washing: After high-speed driving or prolonged exposure to intense sunlight, the surface temperature of the car paint becomes very high. If cold water is used to rinse at this time, the paint surface may be damaged, and in severe cases, it could lead to cracking. Frequency of car washing: There is no need to wash the car too frequently. Generally, washing the car once every 7-10 days is sufficient, as frequent washing can accelerate paint oxidation. However, this is not absolute. If the car body is contaminated with mud, rainwater, bird droppings, etc., the owner should clean the vehicle as soon as possible to prevent corrosion of the paint.

20

1

Share

What are the precautions for wedding cars on highways?

Precautions for wedding cars on highways include vehicle type and lighting requirements. Vehicle type requirements for wedding cars on highways: Wedding cars must comply with the regulations in the "Highway Traffic Management Regulations" to be allowed on highways. Wedding cars are generally small vehicles with 7 seats or fewer, such as small cars or minivans, which are permitted on highways. Lighting requirements for wedding cars: Wedding cars are not allowed to use hazard lights to maintain formation on highways. Generally, hazard lights are not permitted on highways unless in special emergency situations. Hazard lights are intended for emergency use only. Typically, they can be used in situations such as sudden vehicle malfunctions while driving, extreme weather conditions, or vehicles engaged in rescue operations or transporting critically ill patients.

12

1

Share

Why Does the Steering Wheel Make Noise When Turning?

Steering wheel noise during turning is related to bearings, the engine, and interfering components. Bearing factors: As the core component bearing the vehicle's weight and providing rotational capability to the tires, bearings may become damaged under daily stress, affecting driving performance. Engine factors: Technical conditions of certain engine mechanisms may have changed due to excessive part wear, improper assembly or adjustment; or reduced lubrication between components leading to dry friction sounds. Interfering component factors: Interference with adjacent components causing plastic deformation, or insufficient grease between friction surfaces in the steering system resulting in dry or semi-dry friction that produces abnormal noises. Solutions: Noise during initial turning is likely caused by failed shock absorber pressure bearings - replacement is needed. This issue also relates to routine maintenance. Regular inspections for part wear should be conducted, with lubrication added to bearing components to reduce friction.

8

5

Share

Which has priority, left lane change or right lane change?

At intersections, left turns have the right of way. Below is relevant information about intersections: 1. Introduction to intersections: An intersection refers to a level crossing where two or more roads meet on the same plane. On December 1, 2017, the "Specification for English Translation in Public Service Areas" was officially implemented, stipulating that the standard English term for an intersection is Crossroads or Intersection. 2. Roads: Here, roads refer to all roads as defined in the supplementary provisions of the "Road Traffic Safety Law," including urban roads, alleys, lanes, and highways. However, the intersection of alleys or lanes with sidewalks on both sides of urban streets is not considered an intersection; the level crossing of highways with rural paths not classified as highways is also not considered an intersection; nor are level crossings of railways and roads considered regulated intersections here. For motor vehicle passage at railway crossings, the "Road Traffic Safety Law" and the "Implementation Regulations of the Road Traffic Safety Law" have specific provisions.

11

4

Share

Why Can't You Drive When the Transmission Warning Light Is On?

You should not continue driving when the transmission warning light is on. Reasons: Do not blindly continue driving to prevent severe damage to the transmission. If the transmission warning light is on but the engine speed and vehicle speed are normal, you may continue driving. However, if any driving issues arise, visit a 4S shop as soon as possible to check for faults and avoid potential hazards. Function of the Transmission: The transmission changes the gear ratio, expands the range of torque and speed variation of the driving wheels, and allows the vehicle to reverse while maintaining the engine's rotation direction. It enables engine startup and gear shifting. The transmission consists of a gear transmission mechanism and a control mechanism. Precautions: If the electronic components of the automatic transmission (sensors, solenoid valves, or the control module) experience intermittent or persistent failures, the engine warning light may illuminate. In such cases, remain vigilant and promptly check for any faults.

13

5

Share

17-inch Wheels: 215 or 225?

If the original vehicle has 195/65/R15 tires, switching to 225/45/R17 is the most suitable option as there will be no change in diameter and circumference, ensuring no deviation in the speedometer and odometer. Using 215 tires may result in a slight deviation, but the impact is minimal. Below is the relevant information: 1. Wheel Hub: The wheel hub is the rotating part of the wheel steel connected through pillars inside the tire, which is the metal component mounted on the axle that supports the tire. It is also known as the wheel rim, steel rim, or tire ring. Wheel hubs come in various types based on diameter, width, forming method, and material. 2. Size: The wheel hub size refers to the diameter of the wheel hub, with 15 and 16 inches indicating the size (diameter) of the wheel hub. Generally, in passenger cars, larger wheel hub sizes with higher tire aspect ratios can create a visually appealing tension effect and improve the stability of vehicle handling. However, this comes with the additional issue of increased fuel consumption.

8

0

Share

Which indicator on the car dashboard shows fuel consumption?

What kind of car wash detergent should be used for a new car?

What are the precautions for wedding cars on highways?

Why Does the Steering Wheel Make Noise When Turning?

Which has priority, left lane change or right lane change?

Why Can't You Drive When the Transmission Warning Light Is On?

17-inch Wheels: 215 or 225?

What is the part that fixes the shock absorber called?

At What Speed Should You Depress the Clutch When Decelerating in a Manual Transmission?

How many meters does it take to stop when braking suddenly at 70 mph?

What are the pros and cons of rain guards?