Which indicates a full tank, e or f on the car fuel gauge?

When is the appropriate time to use turn signals?

The use of turn signals is not regulated by time or distance, but rather by proper usage standards. Remember to use turn signals in the following situations: 1. When making a left or right turn. 2. At a distance of 30 to 100 meters from an intersection, turn on the turn signal in the direction of the turn. 3. When changing lanes, ensure you first activate the corresponding turn signal without obstructing the normal flow of traffic in other lanes before proceeding with the lane change. 4. When overtaking, turn on the turn signal. 5. Properly use turn signals when making a U-turn, entering or exiting a roundabout, or starting from a parked position. 6. Correctly use turn signals when merging onto a highway from an on-ramp.

5

1

Share

Does a new car need to undergo on-site inspection in its sixth year?

The sixth-year vehicle requires an on-site annual inspection. Here are the relevant details: 1. The six-year exemption from inspection applies to non-commercial passenger cars and other small or mini passenger vehicles (excluding vans and vehicles with 7 or more seats), which are exempt from on-site inspection within the first six years. 2. Owners need to regularly apply for the annual inspection decal. In the second and fourth years after purchasing a new car, owners must bring the vehicle's registration certificate and valid compulsory traffic insurance policy to the vehicle management office to apply for the inspection decal. Alternatively, they can apply for the annual inspection decal online and choose to have it delivered by courier. 3. Before the sixth-year inspection expires, owners need to take the vehicle to an inspection station for on-site testing. Upon passing the inspection, they can obtain the annual inspection decal. Traffic police departments specifically remind that if a vehicle fails to obtain the inspection decal within three consecutive inspection cycles after the inspection validity period expires, it will be subject to mandatory scrapping.

17

5

Share

What does LO mean in car air conditioning?

LO in car air conditioning represents the maximum cooling mode. Car air conditioning modes: LO in car air conditioning stands for maximum cooling. When the vehicle's air conditioning panel displays LO, it indicates that the air conditioning is currently operating at its lowest temperature cooling state, with the system working at full capacity to cool. On the other hand, HI is the abbreviation for 'high' in English. When the panel displays HI, it means the air conditioning is operating at maximum heating capacity, typically at 30 degrees Celsius. In this mode, the system transfers heat from the engine coolant into the vehicle interior. Precautions for using air conditioning: If the vehicle is in a cold start state, heating performance may be affected. Heating will return to normal once the engine coolant temperature rises. Avoid resting in the car with the air conditioning on while the engine is idling. During engine operation, incomplete combustion of gasoline in the cylinders can produce high concentrations of carbon monoxide, leading to potential poisoning hazards.

1

0

Share

What Causes the Engine Fault Light to Illuminate Yellow?

The illumination of the yellow engine fault light is a warning, indicating that certain system parameters of the vehicle may have exceeded the set range. At this time, the vehicle can continue to drive, but some functions may be restricted. The engine fault light can also be red. When the red fault light illuminates, it means the vehicle must stop immediately, turn off the engine, and prohibit further driving while checking for the fault. There are mainly seven reasons for the engine fault light to illuminate: Sensor malfunction: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption, the vehicle's ECU cannot accurately obtain engine data, causing the engine fault light to illuminate. Fuel or oil quality issues: If fuel or engine oil is not added as required by the manufacturer, it may cause engine wear, leading to the fault light illuminating. Poor mixture combustion: Poor mixture combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the fault light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, or fuel line blockage can all cause poor mixture combustion. Turbocharging issues: The intake turbocharging pipeline or turbocharger can also cause the engine fault light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, high oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake issues: If there are problems with the vehicle's intake, it may lead to engine pipeline blockage, and in severe cases, the engine fault light will illuminate. A dirty air filter that is not cleaned regularly can cause intake problems. Exhaust issues: Exhaust faults can also cause the engine fault light to illuminate. The rear oxygen sensor, catalytic converter, exhaust camshaft, and bearing failures are common causes of exhaust problems, with the catalytic converter being the most frequent. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel supply system faults can easily cause catalytic converter issues. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally, and the engine fault light will illuminate. If the engine fault light illuminates, follow these steps: First, check if the engine is running normally and if there are any issues such as shaking or smoke. If so, avoid restarting the engine. Note: Do not restart the engine if the red light is on. If the engine can start, turn it off for 5-10 minutes, then without pressing the brake, press the start button once or turn the key halfway to the 'on' position without pressing the clutch. The vehicle will perform a self-check after powering on. Wait for 5-10 seconds and observe if the fault light on the dashboard turns off. If the fault light remains on, visit a service center as soon as possible. The service center can use a portable diagnostic tool to read the fault code, obtain fault information, and perform targeted repairs.

13

3

Share

Can New Energy Electric Vehicles Wade Through Water?

New energy electric vehicles can wade through water. Theoretically, electric vehicles have better wading capability than traditional fuel-powered vehicles. The entire power battery and motor can operate normally even when submerged in water, without worrying about water entering the engine and causing damage. Definition of New Energy Vehicles: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources, integrating advanced technologies in vehicle power control and driving to form vehicles with advanced technical principles, new technologies, and new structures. Types of New Energy Vehicles: New energy vehicles include pure electric vehicles, extended-range electric vehicles, hybrid vehicles, fuel cell electric vehicles, hydrogen engine vehicles, etc.

14

0

Share

What Causes a Motorcycle to Cut Off Fuel at 6000 RPM?

Motorcycle cutting off fuel at 6000 RPM is basically a carburetor issue, such as problems with the carburetor's air-fuel mixture ratio, needle valve, fuel level, choke, etc., or improper adjustments, as well as the carburetor itself being faulty or incompatible with the motorcycle. The focus should be on inspecting and adjusting the carburetor, or replacing it. Motorcycle gradually slowing down and cutting off fuel: If a motorcycle gradually slows down and cuts off fuel while riding, with the engine slowly shutting off on its own and a noticeable loss of engine power before stalling, it is generally a fuel supply system malfunction. Engine cutting off fuel and stalling with noise: If the engine makes a loud "popping" sound during the fuel cutoff and stalling process, cannot be restarted after stalling, and the kickstarter lever feels very little compression, it can be determined that the cylinder head gasket has been burned through or the crankshaft oil seal is damaged.

1

Share

Which indicates a full tank, e or f on the car fuel gauge?

When is the appropriate time to use turn signals?

Does a new car need to undergo on-site inspection in its sixth year?

What does LO mean in car air conditioning?

What Causes the Engine Fault Light to Illuminate Yellow?

Can New Energy Electric Vehicles Wade Through Water?

What Causes a Motorcycle to Cut Off Fuel at 6000 RPM?

Does a newly purchased car need water added to the radiator?

How Many Days Does It Take to Schedule Subject 2?

What brand is fronway tire?

Can the car cool without turning on the AC?