Which has more space, Nissan Tiida or Sylphy?

1 Answers
AaliyahDella
07/30/25 2:36am
The space in the Sylphy and Tiida is quite similar, as the wheelbases of the two models are not significantly different. Below are the introductions of the two models: 1. The Tiida adopts a hatchback body structure. 2. In terms of body dimensions, the car measures 4393*1766*1524mm with a wheelbase of 2700mm. 3. The Sylphy adopts a sedan body structure. 4. This car measures 4641*1815*1450mm with a wheelbase of 2712mm. 5. Judging from the body dimensions of these two models, the Sylphy has slightly larger dimensions, but the wheelbases of the two cars are very close, indicating that the interior space performance is essentially similar. Although the Tiida is a hatchback, its interior space performance is excellent.
Was this review help?
5
0
Share
More Forum Discussions

How Long Does It Take for Paint to Dry in the Sun?

Under normal conditions, it takes about 10 hours to dry. If exposed to sunlight or in a paint baking room, it takes approximately 7-8 hours. Precautions for car painting: Do not wash the car: If several days have passed after the car is painted, the paint surface should be fine. However, if the paint has just been applied, be cautious as the baking time may be insufficient. It's best not to wash the car when the paint is not fully dry. Avoid contact with chemicals and grease, as they can easily damage the paint surface. Do not cover with a car cover: Avoid covering the newly painted car with a car cover, as it may cause fine scratches on the paint surface. Try to park in the sun as much as possible: This not only helps the paint dry faster but also allows you to assess the skill of the painter and color mixer.
6
0
Share

Can a Hot Motorcycle Engine Be Rinsed with Cold Water?

It is advisable not to rinse with cold water immediately; instead, wait until the engine temperature drops below 85 degrees before rinsing. The reasons for motorcycle engine overheating are as follows: Improper Maintenance: Regardless of whether the current vehicle is water-cooled, oil-cooled, or air-cooled, if the quality of the lubricating oil is substandard or the lubricating oil is insufficient, it will affect the engine's heat dissipation performance. For water-cooled engines, insufficient coolant will weaken the cooling system's performance, thereby impacting the engine's heat dissipation effect. Mechanical Failure: During the use of a motorcycle, if there is clutch slippage, the engine speed will remain in a higher range, leading to excessive engine temperature. Motorcycles are equipped with an oil pump, whose main function is to deliver lubricating oil to various parts requiring lubrication. If the oil pump is damaged, insufficient lubrication will cause the engine temperature to rise excessively.
16
0
Share

What Causes Loud Engine Noise at 3000 RPM?

Reasons and solutions for loud engine noise at 3000 RPM are as follows: Reasons for loud engine noise at 3000 RPM: Engine knocking or misfiring; engine backfire issue; incorrect engine timing adjustment; failure to change engine oil; loose plastic components in the engine compartment; abnormal noise from engine belts, valves, or bearings; faulty starter or water pump; damaged engine mounts; loose engine undercover. Solutions for loud engine noise at 3000 RPM: Use qualified gasoline if fuel quality is poor; disassemble and clean carbon deposits from the engine; replace with qualified engine oil.
14
0
Share

What should be considered when modifying a car's exhaust system?

Considerations for modifying a car's exhaust system are as follows: Pay attention to exhaust performance: Exhaust performance is related to backpressure, which can also be referred to as backpressure or counterpressure. Simply put, it is the resistance inside the exhaust pipe; determine the diameter of the exhaust pipe. Pay attention to resonance phenomena: Resonance phenomena should be considered for the three-way catalyst and the central muffler section. What is a car's exhaust system: The car exhaust system refers to the system that collects and discharges waste gases. It is generally composed of an exhaust manifold, exhaust pipe, catalytic converter, exhaust temperature sensor, car muffler, and exhaust tailpipe. The car exhaust system mainly discharges the waste gases produced by the engine while reducing pollution and noise from the exhaust. The car exhaust system is primarily used for light vehicles, micro vehicles, buses, motorcycles, and other motor vehicles. How the car exhaust system works: After the exhaust gases in the engine cylinders are discharged through the exhaust valves, they are collected by the exhaust manifold of each cylinder into the main exhaust pipe. The gases are then purified by the three-way catalytic converter and muffled by the silencer before being discharged from the exhaust tailpipe outside the vehicle.
3
4
Share

Is Haval a Domestic Brand?

Haval is a domestic brand, operating as a subsidiary of Great Wall Motors. Specializing in SUV models, the Haval brand runs parallel to the Great Wall brand, featuring its own independent logo, as well as separate systems for product development, production, and services. It primarily focuses on the production and sales of SUVs, with its lineup including the H series, M series, and F series. Taking the Haval M6 as an example, this compact SUV under the Haval brand measures 4649mm in length, 1830mm in width, and 1705mm in height, with a wheelbase of 2680mm. The vehicle comes equipped with practical features such as a multifunction steering wheel, an intelligent dual-mode anti-pinch electric sunroof, dual-zone automatic climate control, keyless entry and one-touch start, and adjustable rear seat angles.
11
1
Share

Can Any Wheel Hub Be Replaced as Long as the Size Matches?

Wheel hubs of the same size cannot be replaced arbitrarily; although tires may appear structurally simple, changing the tire size can significantly alter many vehicle parameters. Maintain the same size when replacing wheel hubs: When replacing a wheel hub, it is crucial to ensure the new hub matches the original size. If you intend to modify the wheel hub, you must first understand the original wheel hub and tire specifications of the vehicle. It is essential to maintain the tire's outer diameter nearly unchanged, as this affects the vehicle's stability system and driving safety. Avoid blindly pursuing larger wheel hubs: Blindly opting for larger wheel hubs and tires with a high aspect ratio can reduce comfort, increase fuel consumption, and even compromise driving safety. Choose lighter wheel hubs: If you aim to enhance performance significantly while upsizing the wheel hub, opt for lighter wheel hubs. With the total mass of the wheel (hub and tire) remaining constant, larger wheel hubs tend to degrade performance.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.