Which has more space, a compact SUV or a subcompact SUV?

Why does Audi suddenly display low tire pressure?

Audi suddenly displays low tire pressure for the following reasons: If no visible damage is found, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is discovered upon inspection, drive to a tire shop promptly for repair, then reinflate the tire; If the low tire pressure warning reappears after inflation without any punctures, it may be due to air leakage caused by a deformed wheel rim. It is recommended to inspect and replace the wheel rim. Hazards of low tire pressure: Increased friction with the road surface leads to higher fuel consumption; Causes heavy steering and alignment issues, compromising driving safety; Increases movement in various parts of the tire, leading to abnormal heating due to excessive rolling; Reduces the functionality of the cord and rubber, causing delamination or cord breakage, excessive friction with the rim, resulting in bead damage and abnormal wear; Dramatically increases friction with the ground, rapidly raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a blowout; Increases tire body deformation, making the tire side prone to cracks, and generates flexing movement, leading to excessive heat, accelerating rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area with the ground, hastening shoulder wear.

7

0

Share

How to Operate Cruise Control?

Cruise control operation method is as follows: 1. Activate cruise control: Press the control switch to activate cruise control standby mode, accelerate to the desired speed, then push the control lever downward to set the cruising speed. 2. Cancel cruise control: You can pull the control lever upward, turn off the main cruise control switch, press the accelerator pedal, or gently tap the brake. The cruise control buttons are located on the steering wheel. Here are the specific introductions: 1. "RES+" button: (Press once briefly) Directly use the last used cruising speed. (Press multiple times briefly) When already in cruise mode, each additional press increases the cruising speed by 2 km/h. 2. "SET—" button: (Press once briefly) Set the current speed as the cruising speed. (Press multiple times briefly) When already in cruise mode, each additional press decreases the cruising speed by 2 km/h. 3. Button with a large cross inside a dashboard icon: Cancel cruise (does not clear the set speed memory; you can directly press RES+ next time to recall the set speed). 4. Button with only a single line inside a dashboard icon: Turn on/off cruise (will clear the set speed memory).

17

1

Share

How to Repair a Broken Rearview Mirror Pivot?

If the pivot of the rearview mirror is broken, the following materials can be used for repair: strong double-sided tape specifically designed for rearview mirrors; AB adhesive for rearview mirrors; invisible glue; UV glue. These materials can effectively bond plastic and metal. Regardless of the adhesive chosen, it is important to clean any residual glue from the rearview mirror before application and avoid hanging overly heavy objects during regular use. Below are some relevant details: 1. Repair considerations: Generally, the rearview mirror pivot is made of plastic, which can easily break under improper force. Although it can be temporarily fixed with glue, the repair may not last long, and the strength cannot be guaranteed. 2. Solution for a broken left pivot: If the left pivot of the rearview mirror is broken, it usually cannot be repaired and needs to be replaced. Replacing the entire assembly at a 4S shop can cost anywhere from a few hundred to a thousand yuan, and insurance may cover the expense. 3. Other potential issues with rearview mirrors: Besides pivot damage, rearview mirrors may also encounter other problems, such as scratches or paint peeling on the mirror housing; shattered mirror surface; or severe damage to the mirror housing.

19

2

Share

Can I Install a Rearview Camera on My Car by Myself?

You can install a rearview camera on your car by yourself by mounting a camera at the rear of the vehicle and connecting it to the in-car display screen via wiring. Below is some relevant information about rearview cameras: 1. Definition: A rearview camera, also known as a parking assist system, reverse camera system, or vehicle monitoring system. 2. Application Scope: After years of development, rearview camera systems have upgraded their technology and improved performance, and are now applied to various types of vehicles, including trucks, buses, school buses, combine harvesters, corn harvesters, coaches, and engineering machinery, among other large vehicles.

2

3

Share

Why Shouldn't the Brake Fluid Cap Be Over-tightened?

The reason why the brake fluid cap should not be over-tightened is that excessive tightening can lead to aging and cracking of the cap over time. Below is some extended information about brake fluid: 1. General Replacement Interval: The frequency of brake fluid replacement depends on the cycle specified in the user manual. Typically, it should be replaced every 2 years or every 40,000 kilometers. 2. Precise Replacement Interval: The general interval can only serve as a reference. To determine whether the brake fluid needs replacement, a professional instrument should be used to measure its water content. If the measurement exceeds 3%, it indicates that it's time to replace the brake fluid. If it exceeds 5%, immediate replacement is necessary, as the boiling point will be significantly low by then, directly affecting the vehicle's braking performance.

11

3

Share

How High Can a Car Seat Be Adjusted?

Car seats can be adjusted upward by a maximum of 5 centimeters. Below are detailed instructions regarding car seat adjustment: 1. Adjustment methods: Electric seats are adjusted via buttons; manual seats are adjusted via levers. 2. Purpose: By adjusting the seat, drivers can position themselves optimally for better visibility and easier operation of the steering wheel, pedals, and gear shift. 3. Adjustment range: There should be at least a fist's distance between the head and the car roof to maintain clear visibility for the driver. If the seat is adjusted too high, the head may hit the roof when the vehicle bumps, affecting driving.

1

3

Share

Which has more space, a compact SUV or a subcompact SUV?

Why does Audi suddenly display low tire pressure?

How to Operate Cruise Control?

How to Repair a Broken Rearview Mirror Pivot?

Can I Install a Rearview Camera on My Car by Myself?

Why Shouldn't the Brake Fluid Cap Be Over-tightened?

How High Can a Car Seat Be Adjusted?

How to Check Remaining Points on Driver's License?

How to Replace a Car Air Conditioning Filter

What is Front Wheel Camber?

How to Use BMW M/S Mode?