Which has lower fuel consumption, Geely Vision X6 or Haval M6?

2 Answers
StCali
08/31/25 6:13am
Haval M6 has lower fuel consumption than Geely Vision X6. Below are the specific details about the fuel consumption of Geely Vision X6 and Haval M6: 1. The fuel consumption of Vision SUV is approximately 6.4L per 100 kilometers. 2. The fuel consumption of Haval M6 is approximately 6.8L per 100 kilometers. Below is additional information about Geely Vision X6 and Haval M6: 1. Exterior design: Haval M6 continues to use the family-style design language for its front grille, featuring a honeycomb-shaped air intake grille with chrome trim for outlining; the new Vision SUV adopts a unique color for its logo, and the distinctive front grille integrates with the logo, complemented by sharp headlight designs on both sides, extending the horizontal visual effect. 2. Powertrain and configuration: The new Vision SUV is equipped with a 1.4T engine, with a maximum output power of 104Kw and torque of 235nm; Haval M6 is equipped with a 1.5T engine, with a maximum output power of 110Kw. 3. Configuration: The new Vision SUV comes with basic features such as rearview camera, cruise control, auto hold, and hill start assist; Haval M6 also includes these basic features and adds front and rear parking radar as well as multiple driving mode switching functions.
Was this review help?
14
2
Share
LondonFitz
09/13/25 2:40am
As someone who enjoys delving into car data, I've reviewed numerous test reports, and the official fuel consumption difference between the Geely Vision X6 and the Haval M6 is quite noticeable. The Vision X6 typically has a combined fuel consumption of 7.5 to 8 liters per 100 kilometers, thanks to its lightweight 1.4T engine designed for fuel efficiency. On the other hand, the Haval M6 generally consumes slightly more, ranging from 8.5 to 9.5 liters, as its 1.5T engine offers stronger power but is a bit thirstier. In real-world driving, both vehicles can exceed 10 liters in heavy city traffic, while on highways, the Vision X6 can drop to around 6.5 liters, and the M6 to about 7.5 liters. Based on long-term data, the Vision X6 definitely has lower fuel consumption, but don’t forget that road conditions and driving habits can vary. If you're looking to save money, the Vision X6's fuel efficiency advantage is worth considering.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

How Many Points Are Deducted for Not Wearing a Seat Belt While Driving?

Driver not wearing a seat belt will be deducted 2 points, while passengers not wearing seat belts will not be penalized. According to Article 51 of the "Regulations for the Implementation of the Road Traffic Safety Law": When a motor vehicle is in motion, the driver and passengers must use seat belts as required, and motorcycle drivers and passengers must wear safety helmets as required. Introduction to seat belts: 1. Concept: A seat belt is a vehicle safety device designed to protect vehicle occupants from harmful movements that may occur during a collision or sudden stop. 2. Function: The role of a seat belt is to reduce the likelihood of death or serious injury in traffic collisions by minimizing the secondary impact forces that pose internal collision risks. It ensures proper positioning of occupants to maximize the effectiveness of airbags and prevents occupants from being ejected from the vehicle or experiencing rollovers during a collision.
19
0
Share

How Severe Is the Damage When Scraping the Car Undercarriage?

Scraping the car undercarriage can result in varying degrees of damage. When driving on different road surfaces, speed bumps and potholes are potential "killers" for the car undercarriage. The most vulnerable parts of the undercarriage are the fuel tank, engine oil pan, and brake system fluid lines. If you notice oil leakage or unusual noises after scraping the undercarriage, it may indicate significant damage. Ways to prevent undercarriage scrapes: 1. Pay attention to driving habits: Slow down when driving on uneven roads and be extra cautious of curbs, speed bumps, and potholes. 2. Apply undercarriage coating: You can spray an undercarriage protective coating. This coating effectively shields the undercarriage from flying stones, gravel, and minor scrapes.
2
2
Share

What Happens If You Don't Shift Gears While Driving?

Both torque and power will decrease after the engine speed reaches a certain point. Therefore, if you don't shift gears while driving, as the throttle opening increases, the engine speed will rise, but the traction force will gradually decrease. Eventually, when the engine speed reaches its maximum, the vehicle speed will stabilize at a certain level and no longer increase. Under these conditions, the fuel consumption of the car at the same speed will be significantly higher than that of a normally driven vehicle. Gear shifting technical requirements: 1. Timely: Master the appropriate gear shifting timing—neither upshifting too early nor downshifting too late. 2. Correct: The coordination between the clutch pedal, accelerator pedal, and gear lever must be accurate and synchronized, with precise positioning. 3. Smooth: After shifting into a new gear, release the clutch pedal promptly and smoothly. 4. Swift: The action should be quick to minimize gear shifting time, reduce kinetic energy loss, and lower fuel consumption.
8
2
Share

Is It Safe to Drive Through Water Without Stalling?

Driving through water without stalling doesn't mean it's completely safe; it only indicates that the engine might be fine. Cars are not amphibious vehicles. While many components have waterproof designs, there's still a possibility of water ingress or moisture damage. After driving through water, it's best to get out and inspect the engine compartment, engine air intake, wheels, brake discs, exhaust pipe, carbon canister, and other areas for any foreign objects to ensure safety for the next drive. Potential hazards of driving through water: 1. Engine damage: Water entering the engine can cause issues like insufficient power and shaking. Prolonged use may lead to piston rod deformation or even breakage, ultimately damaging the engine. 2. Stalling: A wet or short-circuited high-voltage distribution system can cause stalling. Water entering the exhaust pipe can also lead to stalling.
12
5
Share

Is It Normal to Have Minor Scratches While Driving?

Having minor scratches while driving is a very common phenomenon. Especially for novice drivers, as the saying goes, "All things are difficult before they are easy," no one can drive skillfully on their first try. It requires step-by-step accumulation of experience. Therefore, it's essential to face this issue correctly, with the key being to learn how to adjust one's mindset and absorb lessons, thereby gaining more driving experience. Guide for New Drivers: 1. Maintain a Good Mindset: When new drivers first hit the road, they often feel nervous, which can lead to stiff movements and mistakes in moments of panic. Thus, it's crucial for beginners to adjust their mindset before driving. 2. Maintain a Safe Following Distance: While driving, always observe the distance between your car and the vehicles in front and behind, especially on highways. It's important to understand that both new and experienced drivers need time to react. Therefore, maintaining a safe distance is necessary to avoid minor scratches.
12
3
Share

Why does the accelerator feel heavy and resistant when driving?

Driving with a heavy and resistant accelerator pedal may be due to issues with the engine's oil and electrical circuits, a dirty fuel injector, or excessive debris at the bottom of the fuel tank. It is recommended to visit a 4S shop for cleaning. There are two types of accelerator pedals: 1. Floor-mounted pedal: With the pivot point located at the bottom of the pedal, the entire foot can rest on it. The pedal itself serves as a fulcrum, allowing the calf and ankle to control the pedal more effortlessly, thereby improving precision and reducing fatigue. When paired with a manual transmission, the floor-mounted pedal also makes it easier to perform heel-and-toe techniques. 2. Hanging-type accelerator pedal: With the pivot point at the top of the bracket, the lower structure is relatively simpler. This design allows for a lighter touch and can be made with a metal rod for the pedal bracket, significantly reducing costs. As a result, most manufacturers prefer this type of pedal.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.