Which has lower fuel consumption, Boyue or Boyue Pro?

1 Answers
KevinAnn
07/29/25 8:01pm
Under the same displacement, the fuel consumption difference between Boyue and Boyue Pro is minimal. Here are the detailed explanations: 1. Fuel Consumption: With the same displacement, the fuel consumption difference between Boyue and Boyue PRO is negligible. The MIIT-rated fuel consumption for Boyue PRO 1.8T is 7.2L/100KM, while for Boyue it is 7.1L/100KM, a difference that is almost insignificant. This is quite normal, as both models share the same powertrain and transmission system, making the minimal gap expected. 2. Differences: Exterior: Boyue PRO adopts Geely's latest design language. Although the overall shape is similar to Boyue, details like the front headlights and taillights give Boyue PRO a more premium feel. The ripple grille on Boyue PRO is larger, making it more visually striking. Interior: Boyue PRO's interior exudes more luxury and appears more expensive. For instance, the brushed metal panels and piano black finishes in Boyue PRO are two glossy elements, but the slightly muted sheen of the brushed panels paired with the high-gloss piano black creates a sophisticated look. Geely has indeed done well in crafting a luxurious feel. Boyue retains the design of the older model, with only the infotainment system upgraded to the latest version. Features: Compared to Boyue, Boyue PRO offers additional features such as full-speed adaptive cruise control, 360-degree panoramic imaging, front seat heating, adaptive high-low beam headlights, automatic wipers, and rear air vents. The top trim also includes lane departure warning, lane keeping assist, and traffic sign recognition among other driving aids. There is no difference in the engine and transmission between the two models.
Was this review help?
10
1
Share
More Forum Discussions

What Causes the Constant Illumination of the Hyundai Verna's Brake Light?

Reasons for the constant illumination of the Hyundai Verna's brake light: 1. Lack of brake fluid; 2. Damaged brake switch; 3. Worn or aged brake pads. If there is a lack of brake fluid, when the driver presses the brake pedal, the force applied to the pedal is transmitted by the piston of the master cylinder through the brake fluid to the brake calipers located at each wheel, causing the brake pads to contact the wheels and thereby stopping the vehicle. The brake light is usually installed at the rear of the vehicle, with a red-colored main body to enhance the penetration of the light source, making it easier for following vehicles to notice the braking of the vehicle ahead even under low visibility conditions, thus helping to prevent rear-end collisions.
1
4
Share

What does the insp warning with a wrench mean?

insp warning with a wrench is to remind the owner to perform maintenance according to the scheduled mileage. The following are the specific maintenance items: 1. Engine system: Replace the engine oil and oil filter. Check if all lubricating fluids in the engine compartment are sufficient and if related components are loose. 2. Lighting system: Check if the lighting system is functioning properly. 3. Vehicle tires: Check if the vehicle tires show excessive wear. 4. Shock absorbers: Check if the shock absorbers are leaking oil. 5. Vehicle chassis: Check if the vehicle chassis has any scratches, damage, looseness, or rust issues.
11
4
Share

Can a Faulty Fuel Injector Cause Engine Seizure?

A faulty fuel injector may lead to engine seizure. Hazards of a damaged fuel injector: A malfunctioning fuel injector causes unresponsive operation, leading to severe carbon buildup in the engine cylinders. This accelerates wear on cylinder liners and pistons, resulting in rough idling, increased fuel consumption, poor acceleration, difficult starting, excessive vehicle emissions, and in severe cases, even engine damage. Engine seizure: Engine seizure occurs when the tachometer enters the red zone. Due to excessively high temperatures, the piston expands and gets stuck in the cylinder, causing complete engine failure. In extreme cases, when pressure becomes too high while the piston remains immobile, it may result in wheel lock-up and even flame ejection.
15
0
Share

Why does the Sagitar shake after wading through water and then return to normal?

If the vehicle shakes after wading through water, do not drive it. You should go to a repair facility as soon as possible for inspection and treatment to identify and eliminate the cause of the shaking. The reasons for shaking after wading through water are as follows: 1. The engine's electrical components and wiring harness may have lost or distorted signals due to water ingress, causing the engine to shake. During repair, inspect and confirm the faulty components, then handle or replace them to resolve the issue. 2. If shaking occurs after wading through water, it may be because water has entered the engine cylinders, damaging mechanical components such as the engine connecting rod. If not replaced, the deformed connecting rod may later break, causing extensive damage to engine block components. The repair cost would then be relatively more expensive.
8
4
Share

Do Rear-Wheel Drive Cars Skid Easily?

Compared to front-wheel drive vehicles, rear-wheel drive cars are more prone to skidding on slippery roads. Reasons why rear-wheel drive cars skid easily: Rear-wheel drive vehicles generally have more powerful engines than front-wheel drive cars, making them more susceptible to losing control on poor road surfaces. However, modern vehicles are equipped with electronic stability control systems, so except in extreme road conditions, rear-wheel drive cars aren't as prone to skidding as one might imagine. Reasons why front-wheel drive cars don't skid easily: Most family sedans today use front-wheel drive systems. The structure of front-wheel drive is relatively simpler, with less power loss during transmission, higher space utilization, better handling characteristics, and more stable performance when driving in rainy or snowy conditions.
2
2
Share

Is the Tiguan L a China 6 compliant vehicle?

The Tiguan L is a China 6 compliant vehicle. Taking the 2019 Tiguan L as an example, it is equipped with a dual-clutch transmission, with the engine delivering a maximum power of 162kw, a maximum horsepower of 220ps, and a maximum torque of 350nm. The Tiguan L adopts Volkswagen's new design language, featuring a polygonal design for the center console, which breaks away from the previous square and rigid style. The polygonal and multi-layered design highlights the sportiness and technological feel of the new Tiguan L. In terms of exterior design, the front grille of the Tiguan L incorporates a large amount of chrome decoration, horizontally stretching the visual effect. The front headlights on both sides are connected to the grille, giving the front of the car a grand and stable impression.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.