Which has lower fuel consumption, 1.2T or 1.5T?

2 Answers
BrantleyMarie
07/24/25 4:16pm
Under the same conditions, the 1.2T engine is definitely more fuel-efficient than the 1.5T. Generally, the larger the displacement, the higher the fuel consumption. However, there is no direct conversion formula between the two because many factors affect fuel consumption. Factors influencing a car's fuel consumption include: 1. Driving on bumpy roads consumes more fuel, as prolonged driving in low gear inevitably increases fuel consumption. 2. Overloading the trunk with heavy items leads to higher fuel consumption. 3. Incorrect driving habits can double or even triple fuel consumption. 4. Driving at high speeds in low gear consumes more fuel. 5. Poor engine maintenance increases fuel consumption. Issues in the engine ignition system, such as incorrect ignition timing, leaking high-voltage wires, or spark plug carbon buildup, reduce combustion efficiency and raise fuel consumption. 6. Insufficient tire pressure results in higher fuel consumption. 7. Neglecting regular car maintenance leads to increased fuel consumption.
Was this review help?
6
1
Share
BradleyAnn
08/11/25 9:03am
I've driven quite a few cars, including 1.2t and 1.5t models. From my experience, which one has lower fuel consumption isn't absolute—it depends on your driving environment. In the city, the smaller 1.2t engine, like during stop-and-go commutes with frequent starts and stops, doesn't need to work as hard, so it naturally consumes less fuel, averaging around 5-6L per 100km. But on highways or when carrying some luggage, the 1.2t has to turbocharge aggressively to keep up, which can actually lead to higher fuel consumption. On the other hand, the 1.5t has ample torque, maintains stable cruising speeds at lower RPMs on highways, and might even consume less fuel than the 1.2t. Vehicle weight also plays a big role—a lighter car paired with a 1.2t is most cost-effective, but SUVs and other larger vehicles with smaller engines tend to burn more fuel. My advice: test different scenarios, check official fuel consumption reports when choosing a car, and consider your daily routes. Driving habits also matter—smooth, steady driving saves much more fuel than sudden braking and hard acceleration.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

Why is water bubbling out of the car radiator?

Reasons for water bubbling out of the car radiator: 1. Engine overheating or high pressure can cause water overflow, or a damaged cylinder head gasket can also lead to water bubbling; 2. A faulty radiator cap, which contains a one-way valve, can cause water to bubble out if it's damaged; 3. Air trapped in the radiator or engine that is difficult to expel, or loose hose seals allowing air to enter, can cause coolant to be forced out of the radiator during circulation by the air pressure; 4. A cracked engine cylinder liner can allow compressed gas from the cylinder to forcibly push coolant out of the radiator during operation. The car radiator, also known as the heat exchanger, is a key component in the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket in a continuous cycle.
4
5
Share

Why does the car's water temperature rise slowly?

Reasons for slow rise in car water temperature: 1. The thermostat is damaged and cannot close, causing the coolant to always circulate in the large loop, which quickly lowers the engine's water temperature; 2. The cooling fan is faulty and constantly running, leading to a rapid drop in water temperature; 3. Insufficient coolant. The solution for slow water temperature rise is: Check if there are issues with the cooling system, such as: whether the shutters are blocked, whether the fan blades are deformed, or whether the water temperature sensor and circuit are short-circuited. You can remove the thermostat and place it in water at different temperatures to observe its opening condition. If it cannot open and close normally, replace the thermostat.
19
5
Share

What Causes High Radiator Temperature?

Reasons for high radiator temperature: 1. Insufficient coolant level—it should be promptly replenished to the appropriate level; 2. Malfunctioning cooling fan—when the vehicle operates at high speeds, the generated heat cannot be effectively transferred to the coolant, leading to poor heat dissipation and resulting in issues like coolant overheating and boiling; 3. Faulty water pump—issues such as seized bearings or damaged impellers (though bearing seizure is less common) can occur. Common impeller damages include cracks or detachment from the pump shaft, slowing down coolant circulation and causing engine overheating; 4. Clogged radiator—the radiator has numerous fins forming small gaps that can easily accumulate debris, dust, or sludge, obstructing airflow and reducing cooling efficiency.
19
2
Share

What Causes a Car Water Pump to Fail?

Car water pump failure is caused by: 1. Coolant leakage due to aging water pump seals; 2. Over-tightened engine serpentine belt, which can lead to premature water pump wear; 3. Long-term neglect of antifreeze replacement, causing internal corrosion that damages the water pump; 4. The water pump reaching its service life without timely replacement. Symptoms of car water pump failure: 1. A damaged water pump weakens or stops the cooling circulation; 2. Coolant leakage near the engine water pump area, leaving traces of coolant color on the pump's vent holes, accompanied by symptoms like high engine temperature; 3. Unusual noises from the water pump when the engine is running.
16
2
Share

What does dual clutch mean in cars?

Dual clutch in cars refers to a transmission system equipped with two clutches. Dual clutch transmission (DCT) differs from conventional automatic transmission systems. It is based on manual transmission yet belongs to automatic transmissions. In addition to combining the flexibility of manual transmissions with the comfort of automatic transmissions, it also provides uninterrupted power output. Dual clutches are divided into dry and wet types, with their differences being: 1. Different cooling methods: Wet clutches contain oil for cooling purposes, while dry ones do not. 2. Different clutch mechanisms: Wet clutches are relatively more advanced because the clutch plates inside generate friction during gear shifts. Dry clutches have greater friction, delivering more direct power transmission, simpler structure, and can be made more compact in size.
9
2
Share

What needs to be replaced during a car's first maintenance?

During a car's first maintenance, the following items need to be replaced: 1. Engine oil and oil filter; 2. Coolant; 3. Windshield washer fluid; 4. Cabin air filter; 5. Brake fluid; 6. Transmission fluid. The first maintenance inspection includes: 1. Checking all car lights, including emergency signal lights, trunk light, glove box light, indicator lights, dashboard warning lights, and interior lights; 2. Inspecting tire wear and tire pressure; 3. Examining fuel lines, dust covers, rubber protective parts under the body, and all screw-fastened areas of the chassis. For the first maintenance, you should prepare your driver's license, maintenance manual, and warranty manual.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.