Which has louder tire noise, Giti or Goodyear?

2 Answers
MacMargaret
07/25/25 4:13pm
Goodyear tires have louder noise. Goodyear tires are typical American products, with poor noise suppression performance. Their grip is second only to Pirelli, and the noise level is close to Pirelli. The advantages are wear resistance, harder tire composition leading to longer lifespan, and excellent grip and water drainage. The disadvantages are a tendency to pick up small stones and relatively high noise levels. Below are the performance characteristics of Goodyear tires and Giti tires: Goodyear Tire Features: Goodyear tires are relatively more wear-resistant, resulting in a harder tire body, along with strong grip and handling performance. They mainly focus on high-end tires, primarily equipping mid-range products of top-tier automotive brands, such as the BMW 5 Series, Mercedes-Benz E-Class, C-Class, etc. Giti Tire Performance: Giti tires emphasize wear resistance and long mileage, while also offering excellent comfort. Giti's global R&D team continuously pursues technological breakthroughs to enhance tire comfort, strengthen the rigidity of the central tread area, and mitigate and absorb vibrations caused by driving on complex road surfaces, ensuring a smooth and comfortable ride.
Was this review help?
9
4
Share
Leonard
08/11/25 9:45pm
To discuss whether Giti or Goodyear tires are noisier, as a driver with over twenty years of experience, I'd say tire noise depends heavily on the specific model and driving conditions. In my experience, Giti tires, especially their budget-friendly models like the Champiro series, tend to have harder tread designs, which can produce noticeably louder noise on rough roads—sometimes a persistent hum that becomes quite irritating. In contrast, Goodyear's series like the EfficientGrip or Assurance use softer rubber compounds and noise-reduction technologies, making them much quieter at highway speeds, allowing for easier conversation in the car. However, this isn't absolute—tire noise is also significantly affected by speed and road conditions; at lower city speeds, Giti tires can be tolerable, but the difference becomes clear on highways. My advice is to check professional test reports before choosing tires, rather than guessing based solely on brand, as excessive noise can be uncomfortable and negatively impact driving mood.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

What are the symptoms of a broken control arm?

Symptoms of a broken control arm: 1. The vehicle pulls to one side when accelerating or decelerating; 2. There are abnormal noises during slow braking and when going over speed bumps; 3. Sudden deviation occurs during high-speed straight-line driving, abnormal noises are heard when turning at low speeds, and there is play in the steering wheel. The control arm, also known as the suspension arm, functions to balance and support the vehicle. When driving on uneven roads, the tires move up and down, which is accomplished by the swinging motion of the control arm. The tire is mounted on the wheel hub, which is connected to the control arm via a ball joint. The control arm is connected to the subframe through a front subframe connection point hinge sleeve. The forces and impacts experienced by the wheel are transmitted to the vehicle body through this hinge sleeve. The front subframe connection point hinge sleeve is a potential location for cracking, meaning that if a broken axle incident occurs, there is a high probability it will happen at the front subframe connection point hinge sleeve.
19
3
Share

Does the Haval First Love come with a particulate filter?

Haval First Love is equipped with a particulate filter. Function of the particulate filter: The particulate filter can reduce the soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. Application technology of the particulate filter: The particulate filter utilizes advanced electronic control systems, catalytic coatings, and fuel-additive catalysts. Principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the engine exhaust particulate trap through a dedicated pipeline. After passing through the densely arranged bag-type filters inside, the carbon smoke particles are adsorbed onto the filter made of metal fiber felt. When the amount of adsorbed particles reaches a certain level, the burner at the end automatically ignites and burns, turning the adsorbed carbon smoke particles into harmless carbon dioxide that is then expelled.
6
3
Share

Does the Mazda CX-4 have automatic window closing when locking?

The Mazda CX-4 has an automatic window closing function when locking. The window lifter refers to the feature that automatically closes the windows for the owner when they forget to do so upon exiting the vehicle, also known as an automatic window lifter. This prevents forgetful owners from leaving their windows open, which could lead to car theft. The window lifter is also referred to as a window closer, car automatic window closer, car window lifter, car automatic window lifter, etc. Below is a detailed introduction to the car automatic window lifter: 1. Non-wire-cutting window lifter: The non-wire-cutting automatic window lifter is widely used in the automatic window lifting function. It achieves the automatic window lifting function by connecting a decoder in series at the original car's window lifting circuit interface. This method does not affect the car's wiring and has a relatively high safety factor. 2. Wire-cutting automatic window lifter: This type of window lifter requires wire-cutting, and the wire-cutting interface is very fragile. It is prone to circuit interruption due to excessive current and temperature rise, and in severe cases, it may even cause spontaneous combustion.
11
1
Share

What's the reason when a car suddenly stops moving?

The reasons why a car suddenly stops moving are as follows: 1. Clutch: When you press the accelerator, the engine speed increases, but the car doesn't move, indicating a problem with the clutch. 2. Fuel supply system: When you press the accelerator, the engine speed does not increase, indicating that there is no fuel injection, which could be due to an issue with the fuel supply system or the throttle cable. 3. Intake system: When experiencing weak acceleration, check if the intake system is intact. If it is intact, consider whether the intake system needs cleaning. Remove the air filter and blow out the dust; if it's difficult to clean, replace it. Check if the throttle body is clean, and further inspect the intake valve and intake manifold. Clean them if necessary. After inspecting and cleaning the intake system, if the acceleration is still weak, it can be concluded that the issue is not related to the intake system. Idle shaking can be resolved by cleaning the intake system.
14
4
Share

What are the advantages and disadvantages of the auto start-stop function in cars?

The advantages and disadvantages of the auto start-stop function in cars are as follows: 1. Advantages and reasons: The principle of the auto start-stop system is to add an electric motor to the common gasoline engine. When the car is stopped and the engine is idling, the engine will completely shut off. When it is necessary to start, the electric motor quickly starts the engine by the driver stepping on the accelerator pedal, clutch, or turning the steering wheel, achieving seamless transition and thereby reducing fuel consumption during idling. 2. Disadvantages and reasons: (1) Frequent engine starts and stops can cause damage to related components such as the starter and battery. Although vehicles equipped with auto start-stop systems use enhanced starters and batteries, in actual use, their failure rates are higher than those of ordinary vehicles without auto start-stop systems. (2) The maintenance costs of enhanced starters and batteries are higher than those of ordinary starters and batteries. Additionally, due to the frequent repeated starts and stops of the engine, there is a higher demand for oil quality, further increasing maintenance costs.
8
4
Share

What kind of engine oil should be used for Xingyue 2.0T?

Xingyue 2.0T requires Shell VCC RBS0-2AE 0W-20 specification engine oil. Below is the relevant introduction about the latest Xingyue 2.0T: Body dimensions: The latest Xingyue 2.0T has a body length, width, and height of 4605mm, 1878mm, and 1643mm respectively, with a wheelbase of 2700mm. Chassis: The latest Xingyue 2.0T features front-wheel drive, with a MacPherson independent front suspension and a multi-link independent rear suspension, adopting a unibody structure. Powertrain: The latest Xingyue is equipped with a 2.0L turbocharged 4-cylinder JLH-4G20TDB engine, delivering a maximum horsepower of 238Ps and a maximum power of 175KW, paired with an 8-speed automatic transmission.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.