Which has higher value, A1 or A2 driver's license?

1 Answers
Isaiah
07/30/25 9:28am
A1 is the highest class for buses, while A2 is the highest class for tractor vehicles. They authorize different vehicle types and cannot be used interchangeably. Since they cover different vehicle categories, it's impossible to compare which is superior, but both represent the highest level in their respective vehicle classes, making them equivalent in status. Below is relevant knowledge about these licenses: 1. A1 means driving with responsibility: Due to the large number of lives carried. In terms of size, it only authorizes driving a single large truck with front-four-rear-eight axles, with a maximum load capacity not exceeding 40 tons. 2. A2 means driving with skill: Because factors like vehicle length, maximum load parameter of 49 tons, number of tires (N), and vehicle specifications all impose requirements on the driving techniques needed for forward and reverse movement. In terms of passenger capacity, it only authorizes driving vehicles carrying up to 19 passengers.
Was this review help?
12
4
Share
More Forum Discussions

How early can a truck undergo its annual inspection?

Truck annual inspections can generally be conducted up to three months in advance, including the month of expiration, but cannot be carried over to the next year. Emissions Test: Primarily checks if the engine number matches the vehicle registration, followed by a simple inspection of the exterior and vehicle condition, then filling out an emissions test form. Exterior Inspection: Mainly examines whether the lights are damaged, if the body appearance matches the original vehicle, any suspension modifications, as well as the sunroof, tires, etc. On-Road Test: The inspection line is responsible for testing brakes, headlights, chassis, and other components. After approximately 5-10 minutes, the vehicle can drive off, receiving a computer-printed form detailing items such as brakes, lighting, and horn.
20
5
Share

What is the Principle of an Automatic Transmission?

The working principle of an automatic transmission in a car involves the use of planetary gear mechanisms for speed variation. The engine's power is transmitted through the gearbox, which is also a key factor in determining fuel consumption. Generally, an automatic transmission consumes over 10% more fuel than a manual transmission. Whether manual or automatic, the more gears a transmission has, the more fuel-efficient it tends to be. An automatic transmission uses planetary gear mechanisms to vary speed automatically based on changes in the throttle pedal and vehicle speed. The driver only needs to control the vehicle speed via the throttle pedal. Common types of automatic transmissions in cars include hydraulic automatic transmissions, electric automatic transmissions, mechanical automatic transmissions, and continuously variable transmissions (CVT). The most common is the hydraulic automatic transmission, which primarily consists of a hydraulically controlled gear transmission system, including an automatic clutch and automatic gearbox. It can automatically shift gears according to the throttle opening and changes in vehicle speed. Introduction to the gears of an automatic transmission: P – Parking gear, also the starting gear. When parked, the gear is set here, and the wheels are mechanically locked to prevent slipping. R – Reverse gear, used for reversing. N – Neutral gear, used for temporary stops (e.g., at a red light). Note that this gear means neutral. To prevent the vehicle from sliding on a slope, the brake must be engaged. D – Drive gear, also known as the forward gear. This gear is used when moving forward. L – Low gear, used when descending a slope or on a long downhill stretch. It automatically limits the car to the lowest gear (equivalent to first gear in a manual car), allowing the engine to provide braking power during descent so the driver doesn't need to brake continuously, which could overheat the brake pads and cause danger.
13
5
Share

How Often Should a Motorcycle Battery Be Replaced?

Motorcycle batteries should be replaced every three years. Detailed Explanation: A battery, also known as an accumulator, is a type of cell that converts chemical energy into electrical energy. The term 'battery' commonly refers to lead-acid batteries, which primarily use lead and its oxides as electrodes and sulfuric acid solution as the electrolyte. A motorcycle consists of five main components: the engine, transmission system, running gear, braking system, and electrical instrumentation. Related Knowledge About Motorcycles: Motorcycles are two- or three-wheeled vehicles powered by gasoline engines and steered by handlebars to control the front wheel. They are lightweight, agile, and fast, widely used for patrols, passenger and cargo transport, and also serve as sports equipment. Broadly speaking, motorcycles can be categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others.
2
5
Share

Can I replace just one tire at a time?

When the tread wear on a car tire is still relatively shallow, you can replace just one tire, as the wear on tires on the same axle tends to be similar. However, it is essential to ensure that the tires on the same axle have identical tread patterns, construction, brand, and specifications. Severe wear: If the tread wear on a tire is severe, replacing only one tire can significantly impact driving safety, potentially causing the vehicle to pull to one side or even lose control. Tire replacement positioning: For front-wheel-drive vehicles, new tires should be placed on the front wheels. For rear-wheel-drive vehicles, the rear wheels are prone to slipping, as power is concentrated on them. Severe wear on the rear tires reduces their grip, so new tires should be placed on the rear wheels of rear-wheel-drive vehicles to prevent rollover.
2
4
Share

What does ALRBAG mean?

ALRBAG refers to the airbag, which is an inflatable cushion installed in vehicles. It deploys instantly during a collision to provide cushioning and protect the safety of the driver and passengers. Working principle of airbags: When a vehicle is involved in a collision while driving, the airbag sensor first receives the impact signal. If the impact reaches a specified intensity, the sensor activates and sends a signal to the electronic control unit. Upon receiving the signal, the electronic control unit compares it with stored data. If the conditions for airbag deployment are met, the drive circuit sends an activation signal to the gas generator in the airbag module. The gas generator then ignites the gas-producing agent, generating a large volume of gas. This gas is filtered and cooled before entering the airbag, causing it to rapidly inflate and break through the cover within milliseconds. The airbag forms an elastic cushion in front of the driver or passengers, then deflates and contracts to absorb impact energy, effectively protecting the head and chest from or reducing the severity of injuries. Airbag deployment conditions: The vehicle must meet a certain speed threshold, typically above 30 km/h or 60 km/h, with variations depending on the manufacturer; the impact location must be correct, usually the front of the vehicle or the wheel arch area, within the range detectable by the airbag sensors; and the impacted object must be hard and forceful, such as another vehicle or a wall. The airbag system is a protective mechanism that activates only when the vehicle experiences a severe impact.
15
0
Share

Do you pay for the driving school exam fees yourself?

Driving school exam fees are not paid by yourself. Detailed explanation: The motor vehicle driver's license examination fees are paid by the driving school. If you fail the first exam, the retake fees for subsequent attempts are paid by yourself. It's also important to note that there are limits on the number of retakes for the driver's license related subjects: Subject 1 and Subject 2 each have only five attempts. Relevant knowledge about motor vehicle driver's license: The motor vehicle driver's license has an examination validity period, which is three years after completing the Subject 1 exam. As long as you complete all the driver's license exams within these three years, you can obtain the motor vehicle driver's license and drive legally. If this time limit is exceeded, all previously passed exam subjects will be canceled, and you cannot continue the examination process.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.