Which has higher fuel consumption, the Changan CS75 or the Haval H6?

1 Answers
AnthonyLynn
07/25/25 6:38am
Compared to the Changan CS75, the Haval H6 has higher fuel consumption. Here are the reasons: 1. Introduction to the CS75: The Changan CS75 is a compact SUV positioned between the CS55 and CS95. It is equipped with the Bluecore series engines. In terms of power, the CS75 offers two engine options: a 2.0L naturally aspirated engine with a maximum power output of 158 horsepower, and a 1.8L turbocharged engine with a maximum power output of 177 horsepower and a peak torque of 230N·m. 2. Reasons for the Haval H6's higher fuel consumption: The vehicle is relatively heavy, with wider tires for improved grip, and the engine is tuned for performance rather than fuel economy. 3. Fuel consumption of the Haval H6: The theoretical fuel consumption is 9.4L/100km; the average real-world fuel consumption is 11.3L/100km in urban areas with air conditioning on, 10.6L/100km in urban areas without air conditioning, and 9.9L/100km on suburban roads.
Was this review help?
9
5
Share
More Forum Discussions

Why Won't the Car Wiper Stop?

The reasons why the car wiper won't stop are: 1. Circuit failure or damage on the line; 2. Damage to the combination switch; 3. The negative pole of the wiper is connected to the car body. The function of the wiper is to remove raindrops and dust attached to the vehicle's windshield to improve the driver's visibility and increase driving safety. Precautions for using the wiper are: 1. Do not park in places with strong sunlight, frost, or excessive dust; 2. On sunny days, do not perform dry wiping without water; 3. If there are hard dirt, leaves, sand, or ice residue on the glass, clean them manually; 4. Reduce the use of the wiper's fast mode; 5. Handle the wiper gently when washing the car or during daily maintenance.
8
1
Share

Do you need to watch during the first car maintenance?

It is advisable to watch during the first car maintenance. After the vehicle enters the maintenance workshop, you can personally follow along to observe the entire maintenance process, especially to supervise the materials used by the maintenance workers and their work attitude. Key points to note for the first maintenance include: 1. Make an appointment in advance; 2. Bring essential items such as the maintenance manual and vehicle registration; 3. Record any faults or questions encountered during daily driving and inform the staff during the first maintenance registration. The first car maintenance items include: 1. Replace engine oil and oil filter, clean the air filter, and check for damage to the generator belt and wiper blades; 2. Check the levels of various fluids; 3. Check tire pressure and look for uneven wear, bulges, or damage; 4. Inspect the car chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Check all switches and lights to ensure they are functioning properly.
4
4
Share

What to Do If Too Much Engine Oil is Added?

The solution for adding too much engine oil is to drain or extract the excess oil. The effects of adding too much engine oil are: 1. It may cause the crankcase to explode; 2. The engine exhaust pipe may emit blue smoke; 3. Piston rings may stick, and fuel injectors may become clogged; 4. It reduces the engine's output power; 5. Oil leakage may occur. The functions of engine oil are: assisting in engine lubrication and reducing friction, cooling and lowering temperature, sealing to prevent leaks, preventing rust and corrosion, and damping vibrations. The method for changing engine oil is: 1. Run the engine to reach operating temperature; 2. Engage the handbrake and lift the vehicle; 3. Unscrew the oil filter and drain the oil; 4. Apply new oil to the gasket of the new oil filter; 5. Pour the new oil into the oil pan; 6. Check for leaks under the engine; 7. Lower the vehicle, check the oil dipstick, and start the engine; 8. Turn off the engine and recheck the oil level.
13
5
Share

What Maintenance is Needed at 50,000 Kilometers for a Car?

Car maintenance at 50,000 kilometers includes: replacing engine oil, oil filter, air filter, cabin air filter, fuel filter, spark plugs, belts, and inspecting the chassis, brake pads, brake discs, tires, etc. Car maintenance is a preventive measure that involves regular inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain components. It mainly covers the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
5
5
Share

Where are the fog lights located on a car?

Fog lights are positioned below the headlights, with one on the top and one on the bottom. The rear fog light is located at the rear of the vehicle. The fog light switch is typically found on the car's lighting control system assembly or the lighting control stalk. In adverse weather conditions such as fog, snow, and heavy rain, or when driving in smoky or dusty environments, front fog lights are essential to illuminate the road ahead and ensure driving safety. Front fog lights are yellow, while rear fog lights are red. Their purpose is to light up the road during rainy or foggy conditions and provide a warning to vehicles in front and behind. In terms of light sources, car fog lights include halogen fog lights and LED fog lights. Fog lights are usually installed below the car's bumper, close to the ground. If fog lights are installed too high, the light cannot penetrate through rain or fog to illuminate the road.
11
1
Share

Where is the rear fog light located on a car?

Car rear fog lights are located on the left side or both sides of the rear taillights. When driving in adverse weather conditions such as fog, snow, heavy rain, or in smoke-filled environments, front fog lights must be used to illuminate the road ahead and ensure driving safety. The main functions of fog lights are: 1. Front fog lights are used to improve lighting when the road conditions ahead are unclear and to alert oncoming drivers; 2. Rear fog lights allow vehicles behind to spot the car in low visibility conditions. The usage methods of fog lights are: 1. When visibility is between 100 to 200 meters, fog lights, low beams, width indicator lights, and taillights must be turned on, maintaining a distance of over 100 meters from the vehicle ahead; 2. When visibility is between 50 to 100 meters, fog lights, low beams, width indicator lights, and taillights should be turned on, keeping a distance of over 50 meters from the vehicle ahead.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.