Which has a lower failure rate, the new Teana or the Camry?

What does the 3363+16 fault code mean?

3363+16 fault code indicates that the Catalyst 1 Tank Heater Circuit is too high. 1. Causes: Coolant pipe direction reversed, tank heater control valve reversed, aftertreatment fluid level temperature sensor reversed; tank heating valve stuck open; incorrect heating valve model used. 2. Solutions: Check whether the coolant pipe, tank heater control valve and aftertreatment fluid level temperature sensor are reversed; perform "Diesel Engine Urea Injection System Heater Test" to check if the tank heating valve is functioning properly. If blockage or mechanical failure is found, repair or replace the heating valve. Check whether the tank heating valve model matches the ECM model.

3

4

Share

What brand is the tank car?

tank is an automotive brand under Great Wall Motors. Exterior: The new vehicle measures 5437/1958/1893 (1918) mm in length/width/height with a wheelbase of 3230mm. The cargo bed interior dimensions are 1520/1520/538mm. The body side features curved wheel arches that protrude significantly outward, accommodating oversized off-road tires. Interior: The Great Wall Pao off-road version adopts a black-red dual-tone scheme with stitching and diamond-pattern elements. The dashboard is equipped with a large central LCD screen paired with rectangular air vents, creating a harmonious overall design.

2

3

Share

Where to Apply for a Replacement Motor Vehicle Driver's License?

To apply for a replacement motor vehicle driver's license, you need to visit the local Vehicle Management Office. Below are the relevant details for replacing a driver's license: 1. Applying for a replacement in a different location: After losing a motor vehicle driver's license, the driver does not need to apply for a replacement at the place where the license was originally issued. They can apply for a replacement at any regional Vehicle Management Office. 2. Driving is prohibited during the loss period: Drivers must carry their motor vehicle driver's license when driving. Otherwise, it will be treated as driving without a license. Upon discovering the loss of the driver's license, the driver should carry the relevant documents and apply for a replacement as soon as possible.

16

0

Share

What Causes the Brake Light Fault Indicator to Illuminate?

The reasons for brake light failure are as follows: 1. Severely worn brake pads: Brake pads are divided into two types, those with sensor wires and those without. Brake pads with sensor wires will automatically complete the circuit when worn to the limit, triggering the fault indicator. 2. Low brake fluid level: Brake fluid plays a crucial role in the vehicle's braking system. When the driver presses the brake pedal, the force is transmitted by the master cylinder piston through the brake fluid to the wheel cylinders at each wheel, causing the brake pads to contact the wheels and stop the vehicle. Insufficient brake fluid will also result in noticeably reduced braking power, and in severe cases, complete loss of braking force.

14

3

Share

What Does the Exclamation Mark Mean on a Vehicle?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. Many indicator lights on the car dashboard feature an exclamation mark, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and wiper fault indicator. Below is a detailed introduction to the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a malfunction in the car's general performance, components, or functions. Common issues include parking sensor faults, fuel cut-off system intervention or malfunction, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant level below the normal range. Transmission oil should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a brake system warning, primarily indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Anomaly: A horizontal line with parentheses below and an exclamation mark in the middle. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, signaling a fault in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. Steering System Fault Indicator: A yellow circle with a steering wheel symbol and a yellow exclamation mark next to it. This indicates looseness in the steering assist system connections, leading to steering fluid leakage. Other possible causes include excessive wear of the steering piston cylinder, poor oil seal sealing, control valve sticking or damage, or excessive air in the power steering system, causing abnormal steering. Foreign objects in the steering hydraulic lines can also cause the steering pump flow control valve to stick. Solution: If low on fluid, replenish promptly. Replace oil pipes, power steering pump, or power steering gear. Inspect all connection points of the oil pipes and tighten all connection bolts. Check the steering gear, steering pump control valve, oil cup filter, steering oil, and clean the entire power steering system. Wiper Fault Indicator: This light, which resembles a fan, indicates a fault in the wiper system. Check the wipers for any issues. In addition, during daily vehicle use, the fault lights displayed on the dashboard are divided into two colors: yellow and red, indicating different levels of severity: Yellow indicates a fault in the corresponding system that is not very serious. Reduce speed and proceed to a repair shop to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. In such cases, do not continue driving. Pull over immediately and seek professional assistance to prevent unpredictable risks to the vehicle and personal safety. Note: When the car is started, all lights will illuminate as the system performs an automatic check. After the check is completed, they will turn off automatically. If a light does not illuminate when the ignition is turned on, remains lit, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly to inspect and eliminate potential safety hazards.

3

2

Share

What is the standard for engine oil consumption?

Engine oil and fuel consumption standards should not exceed 0.3%. Below is an introduction to engine oil: 1. Mineral oil: Extracted from crude oil, mineral oil typically has a low cost. However, due to its base being more prone to oxidation, various imported additives are added. Its service life is approximately six months. 2. Semi-synthetic oil: Although the refining cost is higher, it offers excellent oxidation resistance, making it a high-quality long-lasting oil with a service life of about twelve months. Considering the balance between price and quality, semi-synthetic oil has the widest range of applications. 3. Full synthetic oil: This is chemically synthesized oil that can maintain its lubricating properties even when the base oil fails.

19

0

Share

Which has a lower failure rate, the new Teana or the Camry?

What does the 3363+16 fault code mean?

What brand is the tank car?

Where to Apply for a Replacement Motor Vehicle Driver's License?

What Causes the Brake Light Fault Indicator to Illuminate?

What Does the Exclamation Mark Mean on a Vehicle?

What is the standard for engine oil consumption?

Where is the coolant drain port on the Passat?

How to Replace the Fuel Filter on a Great Wall M4?

Reasons for the Engine Warning Light in the 2020 New Bora?

How to Determine if the Car Body is Straight in Subject Two?