Which has a higher ground clearance, the Yaris L or the Vios?

1 Answers
LeWeston
07/24/25 7:57pm
The ground clearance of these two cars is almost the same. The Vios uses the same engine and transmission as the Yaris L, and both cars are built on the same platform. The Yaris L and the Vios are equipped with two engines: one is a 1.3-liter naturally aspirated engine, and the other is a 1.5-liter naturally aspirated engine. Here are the relevant details: 1. The 1.3-liter naturally aspirated engine, codenamed 6NR-FE, has a maximum power output of 73 kW, a maximum torque of 123 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4200 rpm. This engine is equipped with a dual variable valve timing system and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission. 2. The 1.5-liter naturally aspirated engine, codenamed 7NR, has a maximum power output of 79 kW, a maximum torque of 140 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4200 rpm. This engine features variable valve timing technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission.
Was this review help?
1
5
Share
More Forum Discussions

How to Adjust the Rearview Mirror in a Mercedes-Benz?

Adjust the interior rearview mirror so that the line of sight just passes outside the driver's right ear, making the right ear invisible. The vertical adjustment should position the horizon right in the middle of the mirror. Below are the adjustment methods for Mercedes-Benz rearview mirrors: 1. Left rearview mirror: Adjust vertically so that the sky and ground occupy the upper and lower halves of the mirror respectively. Adjust horizontally so that the car body occupies about 1/4 of the mirror area, allowing visibility of the rear door handle. 2. Right rearview mirror: Adjust vertically so that the sky occupies about 1/4 of the upper part of the mirror. Adjust horizontally so that the car body occupies about 1/4 of the mirror area, allowing visibility of the rear handle.
8
2
Share

What Causes the Buzzing Sound When Reversing in an Automatic Transmission?

Hearing abnormal noises when reversing in an automatic transmission is due to gear shift shock. Below are the causes and solutions for gear shift shock: 1. Faulty clutch plates inside the transmission: Solution: If the transmission fluid smells burnt, it indicates that the clutch plates inside the transmission are burnt out. The transmission needs to be repaired. 2. Transmission system malfunction: Solution: If the transmission system shows a fault code, repairs should be carried out according to the fault code (be sure to go to a professional auto repair shop for repairs). 3. Faulty oil control valve: Solution: If the internal valve body of the oil control valve is burnt out, it needs to be repaired at a repair shop.
3
3
Share

What lights should be turned on when entering a tunnel?

Use low beam lights when passing through a tunnel. Here is some relevant information about low beam lights: 1. Definition: Low beam lights are designed for close-range illumination, with a wide coverage angle (160°) and a short projection distance, and the focus cannot be adjusted. 2. Situations requiring low beam lights: When driving in areas without streetlights at night, or during dusk when it's dark or dawn when light is just appearing, low beam lights must be turned on; if encountering heavy fog, snow, or heavy rain that obstructs visibility, low beam lights must be turned on even during the day; on some roads where lighting is insufficient despite having lighting equipment, low beam lights should also be turned on.
16
1
Share

Baojun Car Maintenance Schedule Overview?

Here is the relevant introduction about the Baojun car maintenance schedule: 1. 5000KM or 3 months: Replace engine oil and oil filter. At 10000KM or 6 months, replace engine oil, oil filter, and fuel filter; at 15000KM or 9 months, replace engine oil and oil filter. 2. After the first maintenance: The second maintenance for Baojun is at 10,000KM or 6 months, and the second one is after driving 45,000KM or 4 years. Brake fluid should be replaced every 35,000KM or 3 years. Additionally, the car uses electronic power steering and a timing chain, which do not require replacement.
19
3
Share

Where is the Bluetooth switch in the old Qashqai?

Location of the Bluetooth switch in the old Qashqai: The Bluetooth switch can be found by opening the central multimedia system and entering the settings interface. Below is an introduction to the new Qashqai: 1. Exterior: Simple and sturdy waist lines run through the entire body, giving the vehicle a more three-dimensional appearance. The door handles on both front and rear doors intersect with the waistline, showcasing a further elevated posture. Paired with large tires, it further enhances the overall sporty feel of the car. 2. Dimensions: The Qashqai measures 4401mm in length, 1837mm in width, and 1593mm in height, with a maximum wheelbase of 2646mm. 3. Powertrain: The new Nissan Qashqai is equipped with a 2.0L naturally aspirated engine that meets the National VI emission standards. This engine delivers a maximum power of 151 horsepower and a maximum torque of 194 Nm.
2
5
Share

How to Read the Speed Code on Tires?

The codes on tires represent the tire width, aspect ratio, rim diameter (in inches), load index, and speed rating. Here is the relevant information: 1. 160/60R-16-80H: In 160/60R-16-80H, 160 indicates the tire width is 160mm, 60 means the section height is 60% of the width, R stands for radial tire, 16 denotes the rim diameter is 16 inches, 80 is the load index, and H indicates the speed rating is H. 2. 205/55R-16-91H: In 205/55R-16-91H, the H here is the speed rating. H represents a maximum speed of 210. Common speed ratings include T, H, V, W, and Y, which correspond to 190, 210, 240, 270, and 300 respectively.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.