Which generation of Blue Core engine is the jl476zqcf?

1 Answers
CatherineFitz
07/29/25 3:43pm
Changan's jl476zqcf model engine belongs to the first generation of Blue Core engines. Here are the specific details: 1. This Blue Core engine is independently developed by Changan Automobile and utilizes advanced production technology. Based on the engine's main power parameters, its maximum torque output ranges between 1750-3500 rpm. 2. The engine is also equipped with a dual variable valve timing system. This system adjusts the opening and closing times of the intake and exhaust valves according to the engine's operating conditions, reducing emissions and achieving economic and environmental benefits. Overall, Changan's development of this engine represents significant technological advancement, with substantial improvements in engine performance.
Was this review help?
19
3
Share
More Forum Discussions

How to Identify Damaged Pressure Bearings?

Identify damaged pressure bearings from the following points: 1. Abnormal noise: When the pressure bearing is damaged due to wear, the vehicle's shock absorber will produce noise during operation. 2. Directional deviation: When the pressure bearing is damaged, the vehicle's direction may slightly deviate, and the return force may be weak. 3. Increased noise: Due to the damaged pressure bearing, the shock absorber will transmit vibrations and impacts directly from the frame to the passenger compartment during operation. Below is relevant information about pressure bearings: 1. Pressure bearings bear part of the vehicle's weight, and the vibrations generated during driving will impact the pressure bearings through the suspension. Therefore, try to avoid potholes or stones on the road while driving. 2. When encountering speed bumps, slow down and minimize driving over curbs, as these actions can greatly impact the pressure bearings. 3. Avoid turning the steering wheel while the vehicle is stationary, as the tire's grip on the ground is stronger when the vehicle is not moving, increasing the pressure on the pressure bearings. Turning the steering wheel in this state will accelerate wear and reduce the lifespan of the pressure bearings.
10
0
Share

How many years can the paint sprayed at a 4S store last?

Normally, the paint sprayed at a 4S store can last for about 4-5 years under regular use. Below is a detailed introduction to the 4S store paint spraying process: 1. Cleaning and sanding: After scratches or collisions, sheet metal repair is usually required to restore the basic shape. Professional paint sanding tools are used to remove the original paint, exposing the metal panel. 2. Filling dents: Applying putty mainly ensures a smooth paint surface and fills in any dents. This process is typically done three times, as it directly affects the final paint result. 3. Base preparation: A paint scanner is used to match the car's paint color, followed by manual fine-tuning. Since different vehicles have varying years of use, the paint may have slight variations, requiring the technician to compare the paint sample with the car body color on-site. 4. Spray painting: The main types of paint used are standard paint, metallic paint, and pearl paint.
10
1
Share

How to Reset the Maintenance Light?

Taking the Roewe RX5 as an example, the specific steps to reset the maintenance light are as follows: 1. Turn off the ignition switch. Simultaneously press and hold the two arrow buttons, then turn on the ignition switch; 2. After about 3 seconds, release the two arrow buttons; 3. The reset menu will appear, asking if you want to reset; 4. Press and hold the SET (reset) button for more than 3 seconds; 5. Press the MODE button. Turn off the ignition switch to complete the reset. Impact of not resetting the maintenance light: If the owner replaces related parts but does not reset the maintenance light, it may delay the next replacement time for car parts, affecting the car's performance. Additionally, it may cause inconvenience for the next part replacement, as the maintenance personnel cannot accurately know the usage time of the new parts.
15
3
Share

What does EPC mean in a vehicle?

EPC in a vehicle stands for Electronic Power Control system of the engine. Below are relevant introductions about the dashboard: Door status indicator light: An indicator light showing whether the doors are fully closed. When a door is open or fails to close, the corresponding indicator light turns on, alerting the owner that the door is not properly closed. The light turns off once the door is closed. Parking indicator light: This light turns on when the parking brake handle (i.e., handbrake) is pulled up. It automatically turns off when the handbrake is released. In some vehicle models, this light also turns on when the brake fluid is insufficient. It lights up when the ignition is turned on and turns off after the engine starts. If it does not light up or remains lit continuously, the generator and circuit should be checked immediately.
3
2
Share

Is the BX7 Borgward a Domestic Car?

BX7 Borgward is not a domestic car; the Borgward BX7 is a joint-venture vehicle. Below are the specific details about the BX7 Borgward: 1. Exterior Design: It features the widest body width in its class at 1911mm, and with the widest body width in its class at 1911mm. 2. Configuration: It comes with multiple appealing features such as an intelligent connectivity system, electric driver's seat, panoramic sunroof, rearview camera, navigation, etc. Among these, the B-Link intelligent connectivity system includes 32 telematics services covering 4G network, driving, entertainment, information, and vehicle status. 3. Interior Design: The cabin adopts an eagle-wing-style layout with a wide, integrated center console that encircles the driver's seat. The highly recognizable hollow matte triangular armrest, combined with exquisite ambient lighting, delivers a more premium sensory experience.
8
4
Share

What is the fuel consumption per 100 kilometers for the Cadillac CT5?

Cadillac CT5 has a comprehensive fuel consumption of 7.2L per 100 kilometers under standard driving conditions. Below is an introduction to fuel consumption per 100 kilometers: 1. Definition: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when traveling 100 kilometers at a certain speed on the road. It is a theoretical indicator for vehicles. Manufacturers measure this value under controlled conditions using a dynamometer installed on the vehicle's chassis, converting it into speed parameters, and then calculating the theoretical experimental fuel consumption per 100 kilometers for the model. 2. Actual fuel consumption: Since most vehicles approach their most economical speed at around 90 km/h, the published theoretical fuel consumption is usually the fuel consumption per 100 kilometers at 90 km/h.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.