Which Generation of Aisin Transmission is Used in the Lavida?

What is the measured minimum ground clearance of the domestically produced Explorer?

Ford Explorer's minimum ground clearance is 193mm. Related introduction: 1. Exterior: The sixth-generation Ford Explorer features a wide front grille with horizontal bars similar to the Edge, but without extensive use of chrome decoration, instead employing a mesh structure paired with slender chrome trim. The Explorer's blade-style combination headlights somewhat resemble those of the previous-generation Ford Edge, with large plastic cladding on the bumper and auxiliary radar sensors near the front wheels on both sides. Compared to the U.S. version, the new Ford Explorer has a larger grille that better suits Chinese aesthetic preferences, with dot-matrix chrome decoration inside the grille. 2. Interior: The standard 12.8-inch central touchscreen uses the SYNC+ 2.0 intelligent infotainment system. The instrument panel adopts a full LCD display that can switch themes according to Sport, Economy, or Snow driving modes. The steering wheel supports four-way electric adjustment, with multifunction buttons including multimedia controls, adaptive cruise, and voice recognition. 3. Powertrain: The sixth-generation Explorer is equipped with an upgraded fourth-generation 2.3T EcoBoost engine, delivering a maximum of 276 horsepower and 425N.m of peak torque, paired with a new 10-speed automatic transmission, achieving 0-100km/h acceleration in just 7.6 seconds.

6

4

Share

Which Cars Are Exempt from Purchase Tax?

Purchasing new energy vehicles does not require payment of purchase tax, but the following conditions must be met: 1. Licensed vehicles: Pure electric vehicles, plug-in hybrid vehicles, and fuel cell vehicles that are licensed for sale in China. The power batteries used must not include lead-acid batteries; 2. Conventional fuel consumption limit: For plug-in hybrid commercial vehicles, the comprehensive fuel consumption (excluding fuel consumption converted from electricity) must be less than 60% of the corresponding limit in the current national standard for conventional fuel consumption; 3. Passed inspection: The vehicle must pass the special inspection for new energy vehicles and meet the requirements of new energy vehicle standards.

13

2

Share

Which is the accelerator and which is the brake in a manual transmission car?

The accelerator and brake pedals in a manual transmission car are located at the bottom of the driver's compartment. The middle pedal is the brake, and the rightmost pedal is the accelerator. Here are some relevant introductions about manual transmission cars: 1. The pedals in the driver's compartment of a manual transmission car are: the leftmost is the clutch, the middle is the brake, and the rightmost is the accelerator. 2. Method for controlling the accelerator pedal: The throttle of a car engine is generally controlled by a pedal, also known as the accelerator pedal, which is a device for controlling the fuel supply of the vehicle engine. The operation of the accelerator pedal should use the right heel placed on the floor of the driver's compartment as a pivot point, with the sole gently pressing on the accelerator pedal, using the extension and flexion of the ankle joint to press down or release. When pressing or releasing the accelerator pedal, the force should be gentle, ensuring a light press and slow release. When starting the engine, do not press the accelerator pedal all the way down; it is better to have it slightly above the idle throttle.

17

2

Share

Can 2H and 4H be switched manually in four-wheel drive?

Yes. 2H is used when driving on good road surfaces. 4H and 4L are suitable for driving on unpaved roads (off-road conditions). If the four-wheel drive function is used on ordinary roads, it will consume a lot of fuel, and tire wear will also increase significantly. When switching gears on the transfer case, it is advisable to do so while the vehicle is stationary. Additional information: 2H and 4H stand for two-wheel drive high gear and four-wheel drive high gear, respectively. If the engine is running, the clutch must be depressed. Since the transfer case generally does not have a synchronized gear mechanism, switching gears while driving often results in gear grinding, which may damage the transfer case.

17

0

Share

Should You Depress the Clutch When Braking at Low Speeds in a Manual Transmission?

Depressing the clutch is not always necessary when braking. The clutch is only used in three situations: starting, shifting gears, and braking at low speeds (to prevent stalling). Generally, you do not need to depress the clutch when slowing down. In emergency situations, both the clutch and brake should be pressed simultaneously. There are primarily two scenarios where you should depress the clutch: 1. When performing emergency braking (equivalent to shifting into neutral): This prevents the car from stalling during a sudden stop, ensuring the vehicle remains agile and maneuverable after braking. Additionally, for most front-wheel-drive cars, steering tends to be more responsive in neutral, allowing better obstacle avoidance in dangerous situations. 2. When braking at low speeds: Another scenario is depressing the clutch while braking at low speeds to control speed, again to prevent the engine from stalling due to excessively slow speed. Since depressing the clutch while braking has almost no impact on braking distance, it is advisable to depress the clutch when braking, except when descending a hill.

11

5

Share

Can I apply for a driver's license renewal on my phone?

You can renew your driver's license on your phone by logging into the Traffic Management 12123 platform, locating the driver's license renewal option, and submitting the required documents as prompted. Renewal regulations: If a motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the six-year validity period of their driver's license, they will be issued a new license with a ten-year validity period. If they continue to maintain this record during the ten-year validity period, they will be issued a long-term valid driver's license. Materials required for replacement or renewal of a driver's license: A motor vehicle driver's license records the holder's ID number, name, gender, date of birth, permanent address, nationality, permitted vehicle type code, initial issuance date, validity period, and management records. It also includes the issuing authority's seal, file number, and the holder's photo. The design of the motor vehicle driver's license is stipulated by the Ministry of Public Security.

14

4

Share

Which Generation of Aisin Transmission is Used in the Lavida?

What is the measured minimum ground clearance of the domestically produced Explorer?

Which Cars Are Exempt from Purchase Tax?

Which is the accelerator and which is the brake in a manual transmission car?

Can 2H and 4H be switched manually in four-wheel drive?

Should You Depress the Clutch When Braking at Low Speeds in a Manual Transmission?

Can I apply for a driver's license renewal on my phone?

What is a U-turn vehicle?

Does a Faulty Handbrake Mean the Brake Pads Need Replacement?

How many points are deducted for stopping midway during curve driving?

What is the reason when the position lights are not working but the headlights are on?