Which generation is the 2018 Accord?

2 Answers
Mila
07/29/25 2:05am
The 10th generation Accord is the 2018 model. Compared to the 9th generation Accord, the 10th generation Accord has undergone significant changes in its exterior design, featuring a fastback shape, a lower front end, and better aerodynamics, with a more sporty positioning. The headlights use LED technology, providing better and safer visibility during night driving. Compared to the 9th generation Accord, the 10th generation Accord has a longer wheelbase, a wider and lower body, making it more sporty. The interior of the 10th generation Accord is overall minimalist, featuring a three-spoke steering wheel that enhances both the tactile feel and sportiness. The 10th generation Accord abandons the dual-screen design of the 9th generation Accord, opting instead for a large floating touchscreen, which enhances the technological feel. The 10th generation Accord is equipped with a 2.0L hybrid system and a 1.5L turbocharged engine. The 2.0L hybrid system's engine has a maximum horsepower of 146 hp, while the electric motor has a maximum horsepower of 184 hp. The 1.5L low-power version has a maximum horsepower of 177 hp, and the high-power version has a maximum horsepower of 194 hp.
Was this review help?
16
0
Share
HopeDella
08/12/25 6:06am
I'm a car enthusiast and have studied the generational divisions of the Honda Accord. The 2018 model belongs to the tenth generation. Starting from the first generation in 1976, the Accord has been updated every few years. The 2018 redesign was quite significant, featuring a more sporty exterior, a tech-savvy interior, and the introduction of turbocharged engines, which deliver faster acceleration. Compared to the ninth generation, the wheelbase was extended, providing more spacious rear seats and greater comfort for family use. The tenth generation has been very popular in both North America and China, with good resale value. If you're concerned about fuel efficiency, its hybrid version is also quite economical. From a historical perspective, the Accord has always emphasized reliability, and the 2018 model continues this tradition. However, it's advisable to check the maintenance records when buying a used one.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

How many turbos does the GTR have?

The Nissan GTR's engine has 2 turbos. Below are the specific details about the Nissan GTR: 1. The GTR is a high-performance, high-reliability, high-power sports car produced by Nissan. 2. The Nissan GTR is equipped with a 3.8-liter twin-turbocharged V6 engine with the code name VR38DETT, delivering 486 horsepower and a maximum torque of 588 Nm. It can output maximum power at 6,400 rpm and maximum torque between 3,200 and 5,200 rpm. This engine uses an aluminum alloy cylinder head and block and is paired with a 6-speed dual-clutch transmission. 3. The Nissan GTR uses a multi-link independent suspension for both the front and rear. Multi-link suspension can improve wheel contact with the ground and enhance traction.
1
0
Share

How to Solve Abnormal Noise When Starting a Car Engine?

There are generally two reasons for a sizzling sound after the engine starts: 1. If the car hasn't been moved for a long time, the engine oil will return to the oil pan. When starting the vehicle, the valves will lack the sealing and lubrication of the oil, resulting in a sizzling sound. This is a normal situation. 2. Abnormal noise from the belt during startup. In this case, it is necessary to promptly check whether the belt has a problem. Here are the solutions for belt noise: 1. If there is belt noise, first check the assembly. The noise may be caused by friction between the timing belt and the timing cover. You can loosen the screws on the timing cover by half a turn to observe if the noise disappears. 2. Next, check the condition of the generator belt. It may be the accessory belt causing the noise. If the timing belt tension is adjusted too tightly, remove the generator and air conditioning power steering belts to determine if the issue lies with these belts. 3. The timing belt tensioner may be faulty, usually requiring replacement along with the timing belt. The noise could also be due to issues with individual engine bearings. Carefully identify the specific source of the sound. If the exact cause cannot be determined, it is recommended to visit a professional repair shop for inspection to determine the cause.
16
5
Share

How to Use the S Gear?

Correct methods for using the S gear in a car are as follows: 1. Overtaking: The issue with the S gear is that it consumes much more fuel because it maintains lower gears and revs higher. The D gear is more fuel-efficient than the S gear, but it doesn't provide as direct power. Many people use the S gear for overtaking and then switch back to the D gear after completing the maneuver. 2. Carbon deposit removal: Engaging the S gear can increase the engine load and raise the temperature inside in a short time, which is beneficial for removing carbon deposits in the engine. 3. Uphill driving: Many drivers use the D gear when climbing slopes, but using the S gear provides more power, making uphill driving easier.
19
4
Share

What to do if the old Jetta's water temperature reaches 130?

The old Jetta's water temperature reaching 130 is generally caused by reasons such as water leakage, thermostat not opening, no circulation, or radiator issues. Therefore, when repairing, start with the simple aspects first, such as checking for water leakage. Due to overheating and insufficient coolant, it is necessary to first fill up with water and then start troubleshooting.
3
0
Share

How to align the timing for the old 4G64 engine?

Align the white link of the Mitsubishi Pajero Sport 4G64 engine's large crankshaft chain with the crankshaft mark. Align the purple link of the Mitsubishi Pajero Sport 4G64 engine's small chain with the white dot mark. Align the arrow of the Mitsubishi Pajero Sport 4G64 engine's balance shaft with the white link of the large chain. Align the arrow of the Mitsubishi Pajero Sport 4G64 engine's intake camshaft with the purple link of the chain.
2
0
Share

How to Connect Bluetooth in an Older Mini Cooper?

Turn on both the mobile phone Bluetooth and the car Bluetooth, ensuring they are in discoverable mode. On the mobile phone Bluetooth interface, click 'Search for Devices' to locate the car Bluetooth device. Select the car Bluetooth displayed on the phone, click 'Pair', enter the pairing code, and click 'Connect'. Simultaneously, click 'Pair' on the car Bluetooth interface. Once 'Connected' is displayed on the car Bluetooth, the process is complete.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.