Which Generation is the 2005 Accord?

1 Answers
Darin
07/29/25 10:12pm
The 2005 Accord is the seventh-generation model. The Accord is a mid-size sedan under Honda, and this car has now evolved to its tenth generation. The tenth-generation Accord has fully entered the turbocharging era, with a wheelbase of 2830 mm, and dimensions of 4893 mm in length, 1862 mm in width, and 1449 mm in height. The tenth-generation Accord uses three engines in total: a 2.0-liter naturally aspirated engine, a low-power version 1.5-liter turbocharged engine, and a high-power version 1.5-liter turbocharged engine. The model equipped with the 2.0-liter naturally aspirated engine is the hybrid version, which features Honda's i-MMD hybrid technology.
Was this review help?
13
1
Share
More Forum Discussions

Can Mazda's Engine Sound Be Heard from Outside?

Mazda's engine sound can usually be heard from outside. Here is a brief introduction about Mazda: 1. Founding Period: Mazda Motor Corporation was established in 1920 and officially began producing small trucks in Hiroshima in 1931. In the early 1960s, it started manufacturing passenger cars. Before the 1990s, Mazda was the third-largest automobile manufacturer in Japan, following Toyota and Nissan, and was also one of the world's renowned Japanese automotive brands. 2. Development Plan: Starting in 2000, Mazda implemented the "New Millennium Plan," marking a new phase in the company's development. From 2002 onwards, Mazda introduced a series of new models, including the Mazda6 (MAZDA6), Mazda3 (MAZDA3), Mazda2 (MAZDA2), Mazda8 (MAZDA8), RX-8, Roadstar, and CX-7, achieving impressive sales performance worldwide.
1
1
Share

What is the reason for the EPC warning light and cylinder misfire in the Volkswagen Touareg?

The reason for the EPC warning light and cylinder misfire in the Volkswagen Touareg is engine abnormality. Below are detailed explanations about automotive engines: 1. Overview: The automotive engine is the device that provides power to the vehicle, determining its power performance, fuel economy, stability, and environmental friendliness. Depending on the power source, automotive engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid powertrains, among others. 2. Others: Common gasoline and diesel engines belong to reciprocating piston-type internal combustion engines, which convert the chemical energy of fuel into mechanical energy of piston motion to deliver power output. Gasoline engines feature high rotational speeds, lightweight construction, low noise levels, easy starting, and low manufacturing costs. Diesel engines have higher compression ratios, superior thermal efficiency, and better fuel economy and emission performance compared to gasoline engines.
14
5
Share

What is the Appropriate Suction Power for a Car Vacuum Cleaner?

Generally, 4000pa is sufficient to meet the vacuuming requirements for the interior of a regular household car. Relevant information is introduced as follows: 1. High-power vacuum cleaners can easily damage the car's socket: The greater the power, the larger the air pressure difference generated by the vacuum cleaner, and the stronger the suction. However, not all cars benefit from choosing a vacuum cleaner with higher power, as each car's rated power varies. If the car's rated power is low, using a vacuum cleaner with too high power can easily burn out the car's socket. 2. Choosing a car vacuum cleaner: When selecting a car vacuum cleaner, carefully consider the power that the car's fuse can handle and the usage environment. Understanding the fuse's power capacity can determine the maximum power of the chosen vacuum cleaner; understanding the usage environment can further determine the most suitable power range for the vacuum cleaner. If the usage environment is poor, and the car accumulates dust easily, then the chosen vacuum cleaner should have a correspondingly higher power; otherwise, it may not clean effectively.
6
1
Share

Does Climbing in First Gear at Over 3000 RPM Damage the Engine?

Engine speed and gear matching do not harm the engine. In daily driving of family cars, the engine speed generally varies around 1500-3000 RPM, and should be lower at idle, around 800-1500 RPM. If the engine speed is too low, fuel combustion in the cylinders is insufficient, leading to easy carbon buildup in the engine. Over time, this can cause more damage to the engine. The C1 gear and speed should match as follows: 1. First gear: Used for normal starts or climbing very steep slopes, with speeds generally around 10 km/h; 2. Second gear: Used as a transition gear for acceleration after starting or for low-speed driving, with speeds generally around 20 km/h; 3. Third gear: Used at speeds of 20-40 km/h, commonly used for city driving; 4. Fourth gear: Used at speeds of 40-60 km/h; 5. Fifth gear: Used at speeds of 60 km/h and above.
16
1
Share

What car has a half-white and half-black logo?

A logo that is half gray and half black belongs to Lynk & Co. The Lynk & Co logo is a square divided into two parts, symbolizing the combination of Geely and Volvo. Lynk & Co is a premium brand jointly established by Geely Holding Group, Geely Auto Group, and Volvo Cars, integrating European technology, European design, global manufacturing, and global sales. Relevant information about the logo is as follows: 1. Introduction: The 'car logo' is the abbreviation for an automobile emblem, referring to the logos of various car brands, which often represent the automobile companies. Car logos include: the car's trademark or factory emblem, product labels, engine model and serial number, vehicle model and serial number, and vehicle identification code, among others. 2. Do not alter the logo arbitrarily: Arbitrarily changing the car logo violates the 'Motor Vehicle Management Regulations': The logo must match the vehicle model and cannot be misused. If discovered, it will be dealt with according to the national regulations on the technical conditions for the safe operation of motor vehicles.
20
4
Share

What is the maximum distance allowed for driving in first gear during the third subject test?

The maximum distance for driving in first gear during the third subject test should not exceed two hundred meters. It is advisable to shift to second gear promptly after starting, once safety is confirmed. For most individuals aiming to obtain a driver's license, passing each subject without failure requires focused attention during daily training and mastery of essential techniques. Below is an introduction to the content of the third subject test: 1. The road driving skills test for the third subject generally includes: preparation before starting, simulated lighting test, starting, straight-line driving, gear shifting operations, lane changing, pulling over, proceeding straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crossings, passing through school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. The safe and civilized driving knowledge test generally covers: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.