Which Generation Does the 2012 Camry Belong To?

1 Answers
McGenevieve
07/25/25 8:23am
The 2012 Camry is the seventh-generation model, which is the previous generation, with the latest model being the eighth generation. The Camry is a mid-size sedan under Toyota, enjoying good sales and reputation in the domestic market. The eighth-generation model features significant exterior changes, with a more youthful design. Below is an introduction to the Camry: 1. The Camry is equipped with two engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. The 2.0-liter naturally aspirated engine delivers 178 horsepower and a maximum torque of 210 Nm, with the maximum torque achieved at 4,400 to 5,200 rpm and the maximum power at 6,600 rpm. This engine features VVT-ie technology, hybrid injection technology, and an aluminum alloy cylinder head and block. 2. The 2.5-liter naturally aspirated engine produces 209 horsepower and a maximum torque of 250 Nm, with the maximum torque achieved at 5,000 rpm and the maximum power at 6,600 rpm. This engine also features VVT-ie technology, hybrid injection technology, and an aluminum alloy cylinder head and block. 3. The Camry uses a MacPherson independent suspension at the front and an E-type multi-link independent suspension at the rear. The E-type multi-link independent suspension enhances the vehicle's handling and ride comfort.
Was this review help?
15
2
Share
More Forum Discussions

How to Interpret the Lines on a Reversing Camera?

Learning to interpret the lines on a reversing camera is an essential skill for driving. Here is a detailed introduction to the markings on a reversing camera: 1. Red line: This can be regarded as a warning line, with the bottom of the line located 30 centimeters from the rear of the vehicle, indicating that you should not reverse further. 2. Yellow line: This can be seen as a deceleration line, with the bottom of the line 60 centimeters from the rear of the vehicle, allowing you to slow down and continue reversing. 3. Green line: This can be considered a safety line, with the bottom of the line positioned at a distance far from the rear of the vehicle, indicating that you can continue reversing. If your reversing camera displays blue lines, there is no need for confusion, as their meanings are essentially the same as above—the line closest to the rear of the vehicle is the warning line, which will prompt you to stop reversing.
11
4
Share

What does the 8-year/160,000 km warranty for the Buick Excelle mean?

Buick Excelle's 8-year/160,000 km warranty refers to the additional coverage provided for major components such as the engine and transmission when purchasing Buick's new-generation 1.3T, 1.0T, and 1.3L small-displacement models, on top of the existing factory warranty policy. Below is an introduction to the Buick Excelle: 1. Powertrain: The new-generation Ecotec series 1.3T and 1.0T engines are paired with an all-aluminum case 6-speed DSS intelligent transmission and a new 6-speed wet-type DCG intelligent dual-clutch transmission, respectively. 2. Suspension: The Buick Excelle features a chassis structure with front MacPherson struts and a rear three-link independent suspension. Compared to the more common non-independent rear suspension designs in its class, it offers superior driving dynamics and enhanced comfort for passengers.
19
5
Share

What causes the abnormal noise when reversing an Audi A4L?

Since the speed during reversing is not high, some abnormal noises that are usually difficult to hear may become more noticeable at this time, such as door noises (loose hinges, wear and looseness, etc.), or noises from other structural components. It is recommended to go to a 4S shop for inspection and repair. The following are some precautions when reversing: Observe the rearview mirrors: Do not keep looking behind the car while reversing. Under the premise of ensuring safety behind the car, you should occasionally observe the left and right side mirrors, pay attention to the distance between obstacles and the car body, and use the steering wheel to correct the position of the car body when reversing accordingly. Try not to accelerate when reversing: Try not to accelerate when reversing, and control the speed to avoid going too fast.
19
0
Share

Why is the Audi A6 engine so loud?

Audi A6 engine noise may be caused by the following reasons: 1. Inadaptability to new oil viscosity: After prolonged use, the engine oil becomes thinner and carbon deposits accumulate. When new oil is replaced, the engine may not adapt to the oil viscosity immediately, potentially causing higher RPMs and consequently increased engine noise. 2. Poor sound insulation: If sound insulation is ineffective, inspect the vehicle's sealing strips. If they are found to be aged, replace them with new ones. 3. Insufficient coolant: In cold conditions, insufficient coolant can lead to louder engine noise. Regularly check the vehicle's coolant level. 4. Damper abnormality: Issues with the vehicle's dampers can easily cause increased engine noise. Pay attention to the dampers during normal driving to avoid vehicle malfunctions caused by damper problems.
18
1
Share

How to Turn Off the Lock Sound on a Mercedes-Benz?

Method to turn off the lock sound on a Mercedes-Benz: Press the right button on the steering wheel to access the vehicle settings interface, then click the lock sound setting button to turn off the sound. Below are common faults that may occur in a Mercedes-Benz: 1. Deterioration of Spark Plug Performance: When driving, you may feel a lack of engine power, jerking during sudden acceleration accompanied by abnormal noises from the exhaust pipe, and engine shaking at idle. 2. Symptoms of a Dirty Throttle Body: After driving approximately 20,000 kilometers, due to air quality issues, the throttle valve may accumulate a significant amount of dirt. When the dirt reaches a certain thickness, the engine may experience difficulties starting, abnormal idle speed after starting, and stalling while driving.
17
4
Share

Does Launch Control Damage Automatic Transmission Cars?

Launch control is an operation that comes at the expense of the engine and transmission, impacting every moving component from the engine to the tires. Therefore, launch control is highly damaging to vehicles. Below are relevant details about launch control: 1. In various motorsport events: Race cars use launch control at the start. This technique allows the car to achieve maximum torque instantly upon launch, propelling it forward like a bullet. Without launch control, the car could lag by zero to one second—a decisive gap in racing. 2. Limited number of launches: Precisely because launch control is extremely harmful to vehicles, cars equipped with this feature impose restrictions on its usage. If the limit is exceeded during the warranty period, resulting in damage to the transmission or engine, manufacturers will not cover the repairs under warranty.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.