Which gear should be engaged when charging the car at idle speed?

1 Answers
JaylaLee
07/24/25 4:35am
When charging the vehicle at idle speed in place, the gear selection should be determined based on specific conditions: 1. When charging the vehicle battery at idle speed on a flat surface without any slope, no other gear needs to be engaged. 2. When parking, the P gear should be engaged. Both the N gear and P gear in an automatic transmission are neutral gears, but the P gear has an additional parking function to prevent the vehicle from sliding. 3. When charging at idle speed on a sloped road, the mechanical handbrake should be tightly engaged to prevent the vehicle from rolling. 4. If the vehicle is parked for a long time, it is best to disconnect the negative cable of the battery to reduce power consumption. The battery can be charged monthly using a charger, or the engine can be started to idle for 20 minutes every week to prevent the battery from losing power.
Was this review help?
14
2
Share
More Forum Discussions

How to Fix the Tire Pressure Warning on BMW Tires?

BMW tire pressure warning repair method: After restoring the air pressure of all four tires to the standard pressure, press and hold the tire pressure reset button next to the gear lever to fix the tire pressure warning. Tire pressure refers to the air pressure inside the tire, and the level of tire pressure plays a significant role in the performance and power of the car. The BMW 7 Series has a body structure of a 4-door, 5-seat sedan, with body dimensions of 5273mm in length, 1902mm in width, and 1498mm in height, and a wheelbase of 3210mm. The BMW 7 Series is equipped with a 2.0T inline 4-cylinder turbocharged engine, with a maximum power of 195 kilowatts and a maximum torque of 400 Newton-meters, paired with an 8-speed automatic manual transmission.
11
3
Share

What are the effects of a faulty rear wheel sensor?

There are many situations where the rear wheel sensor fails. If the wheel speed sensor malfunctions, it will affect the car's ABS braking performance or cause the ABS to stop working. At the same time, the dashboard will display a fault light warning. Although it does not affect the car's original mechanical braking system, it does affect the ABS system. It is recommended to promptly inspect and repair or replace it. Damage to the wheel speed sensor will not only cause a certain deviation in the speed display on the car's dashboard but also lead to unstable engine idling and reduced acceleration performance. Additionally, during the process of starting the vehicle or decelerating to a stop while driving, there is a high likelihood of experiencing momentary pauses or even stalling, which directly affects driving safety to a certain extent.
14
4
Share

What Causes the Brake Pad Noise in the 2019 Sagitar?

2019 Sagitar brake pad noise causes: 1. Insufficient contact surface, increasing brake pad pressure per unit area; 2. Emergency braking alters friction material properties; 3. Rusty brake calipers; 4. Slow brake master cylinder return. Solutions for brake pad noise: 1. Replace brake pads; 2. Secure brake calipers and springs; 3. Replace brake discs. The 2019 Sagitar is equipped with two engines: a 1.2L turbocharged engine and a 1.4L turbocharged engine. The 2019 Sagitar's body dimensions are 4753mm in length, 1800mm in width, 1462mm in height, with a wheelbase of 2731mm.
11
4
Share

How to open the front hood of an Audi A4?

Audi A4 opens the front hood by: 1. Pulling the hood release handle located near the driver's side door; 2. Sliding the lock lever located in the center of the front hood to release the locking mechanism. Taking the 2021 Audi A4 as an example, it belongs to the mid-size car category, with body dimensions of: length 4762mm, width 1847mm, height 1436mm, wheelbase 2825mm, fuel tank capacity 54l, and curb weight 1665kg. The 2021 Audi A4 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 204PS, maximum power of 150kW, maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
8
2
Share

What brand is the BJ40 diesel engine?

BJ40 diesel engine is equipped with a 2.0T diesel engine from Yuchai. BJ40 diesel engine appearance: The Beijing Auto BJ40, which has a hardcore SUV style in appearance, adopts right-angle designs in many places, providing excellent off-road capability. The switches for windows and central locking are designed as toggle levers, giving a very retro feel. Configuration: In terms of body, chassis, and configuration, it is basically the same as the gasoline version, and is matched with a more powerful Champion Edition transfer case. It adopts a part-time four-wheel drive system, which is a must for pure off-road vehicles, and the transfer case has also been upgraded as a whole, with stable performance and strong durability.
19
2
Share

How to Cancel a Successfully Scheduled Driving Test?

The procedures and conditions for canceling a scheduled driving test are as follows: 1. If the candidate needs to cancel the test appointment due to special circumstances: The candidate must personally visit the driver's examination office with their original ID card to complete the cancellation. 2. If the candidate is unable to attend in person to cancel the test appointment: They may authorize someone else to handle the cancellation at the driver's examination office. Below are the requirements for canceling a scheduled test: The cancellation must be made at least 2 days in advance and must be processed on a business day. Online cancellations are not possible for tests successfully scheduled online. When scheduling a test online, candidates must carefully choose the test date and location.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.