Which factory produces Lynk & Co cars?

What is the diameter of a 21-inch wheel hub in centimeters?

The diameter is 53.34 centimeters. 21 inches refers to the diameter of the wheel hub, where 'inch' here means the imperial inch, which is different from the Chinese 'cun'. One Chinese 'cun' equals 3.33 cm, while 1 inch equals 2.54 centimeters. 21*2.54=53.34 centimeters, this is not an exact value, just an approximate figure. Wheel diameter: The wheel diameter affects the driving force of the engine. The larger the diameter, the greater the driving force the engine requires. In stop-and-go city driving conditions, the larger the tire diameter, the higher the fuel consumption. Conversely, the smaller the tire diameter, the more advantageous it is for fuel efficiency. Aspect ratio: Generally, the larger the aspect ratio, the thicker the tire sidewall, resulting in greater rolling resistance. Tires with a smaller aspect ratio have thinner sidewalls, and the part of the tire in contact with the ground deforms less, leading to lower dynamic resistance and better fuel efficiency. In addition to the model, the following common data are also marked on the tire: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8 km/h to 300 km/h. Commonly used speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.

20

2

Share

How to Distinguish Good and Bad Gasoline?

There are several methods to distinguish the quality of gasoline: Smell with your nose: Gasoline with a strong or even pungent smell is of poor quality. Inferior gasoline may have irritating odors such as sharp, eye-stinging, or foul smells. This indicates that the gasoline has excessive sulfur content. The octane number is an agreed value for evaluating gasoline quality, so gasoline with excessively high sulfur content is generally not good. When smelling, do not directly inhale the gasoline; instead, gently wave your hand over the container opening to catch the scent. Observe with your eyes: The color of the gasoline can indicate its quality. Generally, 93# gasoline appears transparent yellow, while 97# gasoline appears emerald green. Qualified gasoline is usually very clear, with no floating matter on the surface, no suspended particles in the middle, and no sediment at the bottom, showing no signs of layering or cloudiness. Conversely, if the gasoline appears cloudy, layered, has suspended particles, or sediment, it indicates potential quality issues. Feel with your hand: Dip your finger into the gasoline and rub it a few times. If your finger feels excessively oily, similar to engine oil, then the gasoline is of poor quality. Alternatively, pour a small amount of gasoline onto your hand. If it evaporates quickly, the gasoline is of good quality.

2

4

Share

Where is the Skoda engine number located?

Skoda engine number is located on the nameplate at the front of the engine under the hood. It usually consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed through the following 4 ways: The vehicle license shows the engine number, usually located on the penultimate line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. Note that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine in the manufacturer, and the engine model can be the same. The engine number refers to the production number of the engine, each engine can only use one engine number and each engine's number is different.

18

0

Share

Is a 1.4L Engine Displacement Sufficient?

1.4L engine power is sufficient for daily household use and urban commuting. For highway driving, it depends on the vehicle size. For example, a car similar in size to a POLO can handle highway driving without issues. However, for A-segment or larger vehicles, it's advisable to choose a car with a larger displacement. Below is additional information: 1.4T: 1.4T essentially refers to a 1.4L naturally aspirated engine equipped with a turbocharger. The displacement is still considered 1.4L, but the power output is significantly enhanced. Generally, a turbocharged engine's power output is comparable to that of a naturally aspirated engine with 1.3 to 1.5 times its displacement. Therefore, it can be roughly stated that a 1.4T engine is equivalent to a naturally aspirated engine with a displacement of 1.8-2.0L.

5

4

Share

What does BND in a car mean?

BND in a car refers to the button for switching radio bands. Below is a related introduction to some parts of the car audio system: PWR button: Pressing this button turns on the audio system. Holding the button for more than 1 second will automatically shut down the audio system. MUT button: Pressing this button will directly mute the car's audio. SEL/AF button: Selects the AM band or FM band. AMS button: When the audio system is in radio mode, holding this button for more than 2 seconds will automatically save the received station to preset stations 1-6. If this button is pressed in MP3 mode, it can select the MP3 menu.

3

2

Share

How Many Types of Color Change Film Materials Are There?

Automotive color change films are primarily made of PVC material. The best quality is MACTIC, the general agent of Car Clothes, with a material thickness of 10um. Methods to distinguish quality: Price: Understanding the corresponding prices of color change films at different market levels can help avoid being deceived. Color: Imported color change films have rich and uniform colors, while domestic ones have a noticeable grainy texture. Touch: The thickness and toughness of the backing paper are directly proportional to the quality of the color change film. Imported films have a fine surface, appropriate thickness, and are less prone to creases; domestic films feel rough, lack toughness, and creases are harder to restore. Usage Method: Components that might interfere with installation should be removed in advance. After overall vehicle preparation, start cutting the film according to the glass dimensions for preliminary fitting. Apply the roughly cut film onto the vehicle body. After installation, the film should adhere smoothly to the body, at which point further trimming is needed to precisely match the vehicle's contours. Once all work is completed, a final inspection is necessary. Check each window, especially the edges, for bubbles and address any issues immediately.

14

3

Share

Which factory produces Lynk & Co cars?

What is the diameter of a 21-inch wheel hub in centimeters?

How to Distinguish Good and Bad Gasoline?

Where is the Skoda engine number located?

Is a 1.4L Engine Displacement Sufficient?

What does BND in a car mean?

How Many Types of Color Change Film Materials Are There?

How to Drain Windshield Washer Fluid?

What's the Difference Between Different Colors of Antifreeze?

What are the symptoms of a burnt car cylinder head gasket?

Is 95 Octane Gasoline Mandatory for the Lavida 1.4T?