···
Log in / Register

Which factory produces Dongfeng Nissan?

4 Answers
StAdalynn
08/31/25 2:21am

Dongfeng Nissan is produced at the Xiangyang factory, and its models include: Bluebird, Sylphy, Teana, Murano, X-Trail, Qashqai, etc. Taking the 2021 Sylphy as an example, it belongs to the compact car category, with body dimensions of: length 4631mm, width 1760mm, height 1503mm, wheelbase of 2700mm, fuel tank capacity of 50l, and trunk capacity of 510l. The 2021 Sylphy is equipped with a 1.6l naturally aspirated engine, with a maximum horsepower of 122ps, maximum power of 90kw, maximum torque of 155nm, and is paired with a 5-speed manual transmission.

Was this review help?
19
4
Share
HenryDella
09/12/25 5:53am

As an automotive enthusiast, I pay special attention to the production of domestic vehicles in China. Dongfeng Nissan is actually a joint venture established by Dongfeng Motor Corporation and Nissan Motor. Their production plants are distributed across several major cities in China, such as the most famous Huadu Plant in Guangzhou, which serves as the largest base producing popular models like the Sylphy with modern equipment. Additionally, there's the Xiangyang Plant in Hubei, specializing in high-end models such as the Teana with strict quality control, and the Zhengzhou Plant in Henan also participates in production, covering more regions including the Venucia brand. The layout of these plants ensures efficient production capacity to support nationwide sales. I personally visited the Guangzhou facility and found the production line well-organized with skilled employees receiving proper training, giving an overall impression of reliability.

Was this review help?
7
2
Share
Expand All
LaRafael
10/26/25 6:42am

As a car owner, I highly trust the product quality of Dongfeng Nissan. After all, I researched their production background when making my purchase. Their factories are mainly located in Huadu, Guangzhou; Xiangyang, Hubei; and Zhengzhou, Henan. Among them, the Huadu plant is exceptionally large with high production capacity, making it suitable for the home-use vehicle series. The Xiangyang plant emphasizes refined craftsmanship and produces more high-end models. The Zhengzhou plant serves as a flexible supplement to reduce transportation costs. This multi-factory strategy allows each location to quickly respond to market demands. During my last car maintenance, I chatted with the technicians, and they all praised this decentralized production model for enhancing reliability.

Was this review help?
5
0
Share
Expand All
DiEmersyn
12/09/25 7:02am

Dongfeng Nissan vehicles are manufactured in several locations across China, such as the Huadu plant in Guangzhou, the Xiangyang factory in Hubei, and the Zhengzhou base in Henan. The Huadu plant produces models like the Sylphy, the Xiangyang factory manufactures vehicles such as the Teana, and the Zhengzhou facility also produces some Nissan and Venucia models. This nationwide distribution makes it convenient for consumers in various regions to purchase new cars, avoiding long-distance transportation issues—a well-thought-out design.

Was this review help?
3
1
Share
Expand All
More Forum Discussions

Where to Get the Driving License Learning File?

The driving license learning file consists of two copies, one kept by the vehicle management office and the other by the driving school. Below is relevant information about the driving license learning file: 1. Driving license learning file: The driving license learning file consists of two copies. The electronic file is archived at the vehicle management office and should now be nationally networked. There is also a paper file, which remains at the driving school until the student obtains the driver's license. Students can request it from the driving school, which usually provides it unconditionally. 2. Movement of the driving license file: When taking the first subject test, the driving school brings the file to the exam. The file then stays at the vehicle management office. Finally, after passing all four subjects, the file is now returned to the individual for safekeeping.
11
5
Share

Which Gear to Use When Pulling Over?

For pulling over during Subject 3 of the driving test, you should first shift to first gear before stopping. When pulling over in Subject 3, depress the clutch pedal as the speed drops below first gear's range. As the right front wheel approaches the curb, turn the steering wheel slightly to the left (the second steering adjustment) to align the vehicle and adjust the distance between the car body and the curb. When the car is about to stop, slightly lift the brake pedal to reduce braking inertia and ensure a smooth stop. More details are as follows: 1. Parking requirements: Once the vehicle enters the parking area in Subject 3, the student must use the reference points taught by the instructor to park, keeping the distance between the car body and the roadside edge line at approximately 30cm for a perfect operation. If the distance exceeds 30cm but is less than 50cm, 10 points will be deducted. 2. Methods for judging the parking distance: Generally, a prominent point inside the car is used to estimate the distance between the car body and the edge line. Common reference points include three parts: the protruding part of the wiper, the right one-third of the front of the car, and the right front door handle. The student can choose any one of these as a reference. When it aligns with the right edge line, the distance between the car body and the roadside edge line is exactly 30cm.
16
2
Share

What are the consequences of having more than 5 unpaid traffic violations?

If you have more than 5 unpaid traffic violations and are caught on the spot, your vehicle will be impounded until all violations are resolved. Below is relevant information about the consequences of not handling traffic violations promptly: 1. Consequences of 5 unpaid violations: If you have more than 5 unpaid violations and are caught on the spot, your vehicle will be impounded until all violations are resolved. 2. Failure to handle violations on time: (1) A late fee of 3% per day may be imposed, with the total not exceeding the original fine amount. (2) The court may be petitioned for enforcement. (3) If it's a penalty involving license suspension and you fail to handle it within 15 working days without valid reason, your driver's license may be revoked. (4) For violations recorded by electronic surveillance, if no driver acknowledges receipt, the 15-working-day limit doesn't apply. However, these must be resolved before the vehicle's annual inspection, otherwise the vehicle won't pass inspection.
3
4
Share

What to Do When Novice Drivers Struggle with Throttle Control?

Novice drivers who struggle with throttle control should avoid frequently tapping the throttle lightly. Here are some key considerations for novice drivers regarding throttle usage: 1. Avoid Frequent Light Throttle Taps: Many beginners fall into the misconception that lightly tapping the throttle won't strain the engine. In reality, frequent light taps can increase engine carbon buildup and make the car feel sluggish. Regularly revving the engine above 4000 RPM in gear is not harmful; instead, it helps effectively clear carbon deposits, making the car run smoother. 2. Avoid Pressing the Throttle When Entering Underground Garages in Drive Gear: When entering a garage, it's usually a downhill slope. Many garages have painted floors, especially slippery when wet tires meet painted surfaces during rainy days, and garages often have many turns. Failing to slow down when driving into a garage can easily lead to scratches with other vehicles or collisions with walls, resulting in traffic accidents.
15
2
Share

Why Bore the Cylinder Instead of Directly Replacing the Cylinder Liner?

Replacing the cylinder liner definitely requires replacing the piston, but boring the cylinder may not always be necessary. Here is a detailed introduction regarding cylinder boring and replacement: 1. Introduction to Cylinder Liner Replacement: Replacing the cylinder liner definitely requires replacing the piston, but boring the cylinder may not be necessary. This is because the cylinder liner and piston are used as a matched set, and it is difficult to pair a new cylinder liner with an old piston, so they must be replaced together. However, boring the cylinder may not always be required because nowadays, increasing the piston size is rarely used as a method to repair the engine. Only when a standard-sized piston cannot resolve the issue during an engine overhaul will an oversized piston be used, which then necessitates boring the cylinder. If only the piston is replaced, the cylinder liner may not need to be changed. For example, if the piston is damaged due to water ingress or valve impact, the cylinder liner usually remains undamaged, while the piston, connecting rod, crankshaft, and other components may be affected (in many cases, only the piston is damaged). In such scenarios, not only is replacing the cylinder liner unnecessary, but boring the cylinder is even more unnecessary. 2. Introduction and Function of Cylinder Boring: After prolonged operation, severe cylinder wear is inevitable, leading to "blow-by," which can cause symptoms such as burning oil, reduced power, and increased fuel consumption. At this point, cylinder boring becomes necessary. Cylinder boring is a common repair method for excessively worn dry cylinder liners.
9
4
Share

What are the A2 straight-line reversing skills?

A2 reversing into garage skills rhyme: 1. Fasten seatbelt, engage gear, left signal flashes, press clutch and release handbrake, slowly lift clutch to start gently. 2. Align right line to adjust car body, left mirror vertical gap follows right line: stop when front horizontal line aligns with shoulder, engage reverse gear and release clutch. When left mirror covers horizontal line corner, turn steering wheel fully to the right. 3. Watch left mirror for garage line, turn back one circle at 30-degree angle: when car and line are parallel, straighten steering wheel two full turns, left mirror covers front garage corner, press clutch and brake. Engage first gear to exit garage, turn steering wheel fully left when car front touches line. Stop when car front covers line, keep steering wheel position and reverse. 4. Watch right mirror for garage line, turn back slightly at 30-degree angle: when car and line are parallel, straighten steering wheel two full turns, left mirror covers front garage corner, press clutch and brake. Engage first gear to exit garage, turn steering wheel fully right when car front touches line.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.